Initial upload of HyprArch releng configuration

airootfs/etc/calamares/modules/mobile/mobile.conf

@@ -0,0 +1,173 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Commented out values are defaults.
+# All commands are running with 'sh -c'.
+---
+# This entry exists only to keep the tests happy, remove it in
+# any production configuration.
+bogus: true
+
+#######
+### Target OS information
+#######
+
+## Operating System Name
+# osName: "(unknown)"
+
+## User Interface name (e.g. Plasma Mobile)
+# userInterface: "(unknown)"
+
+## User Interface assumes that the password is numeric (as of writing, this is
+## the case with Plasma Mobile and Phosh)
+# userPasswordNumeric: true
+
+## OS version
+# version: "(unknown)"
+
+## Default username (for which the password will be set)
+## Ensure also cmdUsermod command matches the default user, so it can be changed if desired.
+# username: "user"
+
+## reserved usernames (for user_pass username prompt and ssh_credentials)
+# reservedUsernames:
+#        - adm
+#        - at
+#        - bin
+#        - colord
+#        - cron
+#        - cyrus
+#        - daemon
+#        - ftp
+#        - games
+#        - geoclue
+#        - guest
+#        - halt
+#        - lightdm
+#        - lp
+#        - mail
+#        - man
+#        - messagebus
+#        - news
+#        - nobody
+#        - ntp
+#        - operator
+#        - polkitd
+#        - postmaster
+#        - pulse
+#        - root
+#        - shutdown
+#        - smmsp
+#        - squid
+#        - sshd
+#        - sync
+#        - uucp
+#        - vpopmail
+#        - xfs
+
+#######
+### Target device information
+#######
+
+## Architecture (e.g. aarch64)
+# arch: "(unknown)"
+
+## Name of the device (e.g. PinePhone)
+# device: "(unknown)"
+
+## Partition that will be formatted and mounted (optionally with FDE) for the
+## rootfs
+# targetDeviceRoot: "/dev/unknown"
+
+## Partition that will be formatted and mounted (optionally with FDE) for the
+## rootfs, on internal storage. The installer OS must not set this, if it was
+## booted from the internal storage (this is not checked in the mobile
+## module!).
+## If this is set, the user gets asked whether they want to install on internal
+## or external storage. If the user chose internal storage,
+## cmdInternalStoragePrepare (see below) runs before this partition gets
+## formatted (see below). A note is displayed, that the device is powered off
+## after installation and that the user should remove the external storage
+## medium. So you need to adjust the installer OS to poweroff in that case, and
+## not reboot. See postmarketos-ondev.git for reference.
+# targetDeviceRootInternal: ""
+
+######
+### Installer Features
+######
+
+## Ask whether sshd should be enabled or not. If enabled, add a dedicated ssh
+## user with proper username and password and suggest to change to key-based
+## authentication after installation.
+# featureSshd: true
+
+## Ask the user, which filesystem to use.
+# featureFsType: false
+## Filesystems that the user can choose from.
+#fsModel:
+#        - ext4
+#        - f2fs
+#        - btrfs
+## Default filesystem to display in the dialog. If featureFsType is disabled,
+## this gets used without asking the user.
+# defaultFs: ext4
+
+## Start Qt's virtual keyboard within the mobile module. Disable if you bring
+## your own virtual keyboard (e.g. svkbd).
+# builtinVirtualKeyboard: true
+
+#######
+### Commands running in the installer OS
+#######
+
+## Format the target partition with LUKS
+## Arguments: <device>
+## Stdin: password with \n
+# cmdLuksFormat: "cryptsetup luksFormat --use-random"
+
+## Open the formatted partition
+## Arguments: <device> <mapping name>
+## Stdin: password with \n
+# cmdLuksOpen: "cryptsetup luksOpen"
+
+## Format the rootfs with a file system
+## Arguments: <device>
+## Btrfs: to allow snapshots to work on the root subvolume, it is recommended that this
+## command be a script which will create a subvolume and make it default
+## An example can be found at:
+## https://gitlab.com/mobian1/calamares-settings-mobian/-/merge_requests/2/diffs#diff-content-dde34f5f1c89e3dea63608c553bbc452dedf428f
+# cmdMkfsRootBtrfs: "mkfs.btrfs -L 'unknownOS_root'"
+# cmdMkfsRootExt4: "mkfs.ext4 -L 'unknownOS_root'"
+# cmdMkfsRootF2fs: "mkfs.f2fs -l 'unknownOS_root'"
+
+## Mount the partition after formatting with file system
+## Arguments: <device> <mountpoint>
+# cmdMount: "mount"
+
+## When user selects installation from external storage to internal storage
+## (see targetDeviceRootInternal above), use this command to prepare the
+## internal storage medium. The command must create a partition table with
+## two partitions (boot, root) and fill the boot partition. See the
+## ondev-internal-storage-prepare.sh in postmarketos-ondev as example.
+# cmdInternalStoragePrepare: "ondev-internal-storage-prepare"
+
+#######
+### Commands running in the target OS (chroot)
+#######
+
+## Change the username for the default user
+## Stdin: username with \n
+# cmdUsermod: "xargs -I{} -n1 usermod -m -d /home/{} -l {} -c {} user"
+
+## Set the password for default user and sshd user
+## Arguments: <username>
+## Stdin: password twice, each time with \n
+# cmdPasswd: "passwd"
+
+## Enable or disable sshd
+# cmdSshdEnable: "systemctl enable sshd.service"
+# cmdSshdDisable: "systemctl disable sshd.service"
+
+## Create the user for sshd
+## Arguments: <username>
+# cmdSshdUseradd: "useradd -G wheel -m"