Initial upload of HyprArch releng configuration

airootfs/usr/share/applications/calamares.desktop

@@ -0,0 +1,243 @@
+[Desktop Entry]
+Type=Application
+Version=1.0
+Name=Install System
+GenericName=System Installer
+Keywords=calamares;system;installer;
+TryExec=calamares
+Exec=sh -c "pkexec calamares"
+Comment=Calamares — System Installer
+Icon=calamares
+Terminal=false
+StartupNotify=true
+Categories=Qt;System;
+X-AppStream-Ignore=true
+
+Name[ar]=تثبيت النظام 
+Icon[ar]=كالامارس
+GenericName[ar]=مثبت النظام
+Comment[ar]=كالامارس - مثبت النظام
+Name[as]=চিছটেম ইনস্তল কৰক
+Icon[as]=কেলামাৰেচ
+GenericName[as]=চিছটেম ইনস্তলাৰ
+Comment[as]=কেলামাৰেচ — চিছটেম​ ইনস্তলাৰ
+Name[ast]=Instalar el sistema
+Icon[ast]=calamares
+GenericName[ast]=Instalador del sistema
+Comment[ast]=Calamares — Instalador del sistema
+Name[az]=Sistemi Quraşdırmaq
+Icon[az]=calamares
+GenericName[az]=Sistem Quraşdırıcısı
+Comment[az]=Calamares Sistem Quraşdırıcısı
+Name[az_AZ]=Sistemi quraşdırmaq
+Icon[az_AZ]=calamares
+GenericName[az_AZ]=Sistem quraşdırcısı
+Comment[az_AZ]=Calamares — Sistem Quraşdırıcısı
+Name[be]=Усталяваць сістэму
+Icon[be]=calamares
+GenericName[be]=Усталёўшчык сістэмы
+Comment[be]=Calamares — усталёўшчык сістэмы
+Name[bg]=Инсталирай системата
+Icon[bg]=calamares
+GenericName[bg]=Системен инсталатор
+Comment[bg]=„Calamares“ – Системен инсталатор
+Name[bn]=সিস্টেম ইনস্টল করুন
+Icon[bn]=ক্যালামারেস
+GenericName[bn]=সিস্টেম ইনস্টলার
+Comment[bn]=ক্যালামারেস - সিস্টেম ইনস্টলার
+Name[ca]=Instal·la el sistema
+Icon[ca]=calamares
+GenericName[ca]=Instal·lador de sistema
+Comment[ca]=Calamares — Instal·lador de sistema
+Name[cs_CZ]=Nainstalovat systém
+Icon[cs_CZ]=calamares
+GenericName[cs_CZ]=Instalátor systému
+Comment[cs_CZ]=Calamares – instalátor operačních systémů
+Name[da]=Installér system
+Icon[da]=calamares
+GenericName[da]=Systeminstallationsprogram
+Comment[da]=Calamares — Systeminstallationsprogram
+Name[de]=System installieren
+Icon[de]=calamares
+GenericName[de]=Installation des Betriebssystems
+Comment[de]=Calamares - Installation des Betriebssystems
+Name[el]=Εγκατάσταση συστήματος
+Icon[el]=calamares
+GenericName[el]=Εγκατάσταση συστήματος
+Comment[el]=Calamares — Εγκατάσταση συστήματος
+Name[en_GB]=Install System
+Icon[en_GB]=calamares
+GenericName[en_GB]=System Installer
+Comment[en_GB]=Calamares — System Installer
+Name[eo]=Instali Sistemo
+Icon[eo]=calamares
+GenericName[eo]=Sistema Instalilo
+Comment[eo]=Calamares — Sistema Instalilo
+Name[es]=Instalar el sistema
+Icon[es]=calamares
+GenericName[es]=Instalador del sistema
+Comment[es]=Calamares — Instalador del sistema
+Name[es_MX]=Instalar el Sistema
+Icon[es_MX]=calamares
+GenericName[es_MX]=Instalador del sistema
+Comment[es_MX]=Calamares - Instalador del sistema
+Name[es_PR]=Instalar el sistema
+Name[et]=Paigalda süsteem
+Icon[et]=calamares
+GenericName[et]=Süsteemipaigaldaja
+Comment[et]=Calamares — süsteemipaigaldaja
+Name[eu]=Sistema instalatu
+Icon[eu]=calamares
+GenericName[eu]=Sistema instalatzailea
+Comment[eu]=Calamares - sistema instalatzailea
+Name[fa]=نصب سامانه
+Icon[fa]=کالامارس
+GenericName[fa]=نصب‌کننده سامانه
+Comment[fa]=کالامارس — نصب‌کننده سامانه
+Name[fi_FI]=Asenna järjestelmä
+Icon[fi_FI]=calamares
+GenericName[fi_FI]=Järjestelmän asennusohjelma
+Comment[fi_FI]=Calamares — Järjestelmän asentaja
+Name[fr]=Installer le système
+Icon[fr]=calamares
+GenericName[fr]=Installateur système
+Comment[fr]=Calamares - Installateur système
+Name[fur]=Instale il sisteme
+Icon[fur]=calamares
+GenericName[fur]=Program di instalazion dal sisteme
+Comment[fur]=Calamares — Program di instalazion dal sisteme
+Name[gl]=Instalación do Sistema
+Icon[gl]=calamares
+GenericName[gl]=Instalador de sistemas
+Comment[gl]=Calamares — Instalador de sistemas
+Name[he]=התקנת מערכת
+Icon[he]=calamares
+GenericName[he]=אשף התקנה
+Comment[he]=Calamares - אשף התקנה
+Name[hi]=सिस्टम इंस्टॉल करें
+Icon[hi]=calamares
+GenericName[hi]=सिस्टम इंस्टॉलर
+Comment[hi]=Calamares — सिस्टम इंस्टॉलर
+Name[hr]=Instaliraj sustav
+Icon[hr]=calamares
+GenericName[hr]=Instalacija sustava
+Comment[hr]=Calamares — Instalacija sustava
+Name[hu]=Rendszer telepítése
+Icon[hu]=calamares
+GenericName[hu]=Rendszertelepítő
+Comment[hu]=Calamares – Rendszertelepítő
+Name[id]=Instal Sistem
+Icon[id]=calamares
+GenericName[id]=Pemasang
+Comment[id]=Calamares — Pemasang Sistem
+Name[ie]=Installar li sistema
+Icon[ie]=calamares
+GenericName[ie]=Installator del sistema
+Comment[ie]=Calamares — Installator del sistema
+Name[is]=Setja upp kerfið
+Icon[is]=calamares
+GenericName[is]=Kerfis uppsetning
+Comment[is]=Calamares — Kerfis uppsetning
+Name[it_IT]=Installa il sistema
+Icon[it_IT]=calamares
+GenericName[it_IT]=Programma d'installazione del sistema
+Comment[it_IT]=Calamares — Programma d'installazione del sistema
+Name[ja]=システムをインストール
+Icon[ja]=calamares
+GenericName[ja]=システムインストーラー
+Comment[ja]=Calamares — システムインストーラー
+Name[ko]=시스템 설치
+Icon[ko]=깔라마레스
+GenericName[ko]=시스템 설치 관리자
+Comment[ko]=깔라마레스 — 시스템 설치 관리자
+Name[lt]=Įdiegti Sistemą
+Icon[lt]=calamares
+GenericName[lt]=Sistemos diegimas į kompiuterį
+Comment[lt]=Calamares — Sistemos diegimo programa
+Name[mk]=Инсталирај го системот
+Icon[mk]=calamares
+GenericName[mk]=Системен Инсталер
+Comment[mk]=Calamares - Системен Инсталер
+Name[ml]=സിസ്റ്റം ഇൻസ്റ്റാൾ ചെയ്യുക
+Icon[ml]=കലാമാരേസ്
+GenericName[ml]=സിസ്റ്റം ഇൻസ്റ്റാളർ
+Comment[ml]=കലാമാരേസ് - സിസ്റ്റം ഇൻസ്റ്റാളർ
+Name[nb]=Installer System
+Icon[nb]=calamares
+GenericName[nb]=Systeminstallatør
+Comment[nb]=Calamares-systeminstallatør
+Name[ne_NP]= सिस्टम इन्स्टल गर्नुहोस्
+Icon[ne_NP]=Calamares
+GenericName[ne_NP]=सिस्टम इन्स्टलर
+Comment[ne_NP]=Calamares - सिस्टम इन्स्टलर
+Name[nl]=Installeer systeem
+Icon[nl]=calamares
+GenericName[nl]=Installatieprogramma
+Comment[nl]=Calamares — Installatieprogramma
+Name[pl]=Zainstaluj system
+Icon[pl]=calamares
+GenericName[pl]=Instalator systemu
+Comment[pl]=Calamares — Instalator systemu
+Name[pt_BR]=Sistema de Instalação
+Icon[pt_BR]=calamares
+GenericName[pt_BR]=Instalador de Sistema
+Comment[pt_BR]=Calamares — Instalador de Sistema
+Name[pt_PT]=Instalar Sistema
+Icon[pt_PT]=calamares
+GenericName[pt_PT]=Instalador de Sistema
+Comment[pt_PT]=Instalador de Sistema - Calamares
+Name[ro]=Instalează sistemul
+Icon[ro]=calamares
+GenericName[ro]=Instalator de sistem
+Comment[ro]=Calamares — Instalator de sistem
+Name[ru]=Установить систему
+Icon[ru]=calamares
+GenericName[ru]=Установщик системы
+Comment[ru]=Calamares - Установщик системы
+Name[si]=පද්ධතිය ස්ථාපනය කරන්න
+Icon[si]=කැලමරේස්
+GenericName[si]=පද්ධති ස්ථාපකය
+Comment[si]=Calamares - පද්ධති ස්ථාපකය
+Name[sk]=Inštalovať systém
+Icon[sk]=calamares
+GenericName[sk]=Inštalátor systému
+Comment[sk]=Calamares — Inštalátor systému
+Name[sl]=Namesti sistem
+Name[sq]=Instalo Sistemin
+Icon[sq]=calamares
+GenericName[sq]=Instalues Sistemi
+Comment[sq]=Calamares — Instalues Sistemi
+Name[sr]=Инсталирај систем
+Icon[sr]=calamares
+GenericName[sr]=Инсталатер система
+Comment[sr]=Каламарес — инсталатер система
+Name[sr@latin]=Instaliraj sistem
+Name[sv]=Installera system
+Icon[sv]=calamares
+GenericName[sv]=Systeminstallerare
+Comment[sv]=Calamares — Systeminstallerare
+Name[tg]=Насбкунии низом
+Icon[tg]=calamares
+GenericName[tg]=Насбкунандаи низомӣ
+Comment[tg]=Calamares — Насбкунандаи низомӣ
+Name[th]=ติดตั้งระบบ
+Name[tr_TR]=Sistemi Yükle
+Icon[tr_TR]=calamares
+GenericName[tr_TR]=Sistem Yükleyici
+Comment[tr_TR]=Calamares — Sistem Yükleyici
+Name[uk]=Встановити Систему
+Icon[uk]=calamares
+GenericName[uk]=Встановлювач системи
+Comment[uk]=Calamares - Встановлювач системи
+Name[vi]=Cài đặt hệ thống
+Icon[vi]=calamares
+GenericName[vi]=Bộ cài đặt hệ thống
+Comment[vi]=Calamares — Bộ cài đặt hệ thống
+Name[zh_CN]=安装系统
+Icon[zh_CN]=calamares
+GenericName[zh_CN]=系统安装程序
+Comment[zh_CN]=Calamares — 系统安装程序
+Name[zh_TW]=安裝系統
+Icon[zh_TW]=calamares
+GenericName[zh_TW]=系統安裝程式
+Comment[zh_TW]=Calamares ── 系統安裝程式

airootfs/usr/share/calamares/branding/default/banner.png.license

@@ -0,0 +1,2 @@
+SPDX-FileCopyrightText: 2020 Adriaan de Groot <groot@kde.org>
+SPDX-License-Identifier: GPL-3.0-or-later

airootfs/usr/share/calamares/branding/default/branding.desc

@@ -0,0 +1,239 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Product branding information. This influences some global
+# user-visible aspects of Calamares, such as the product
+# name, window behavior, and the slideshow during installation.
+#
+# Additional styling can be done using the stylesheet.qss
+# file, also in the branding directory.
+---
+componentName:  default
+
+
+### WELCOME / OVERALL WORDING
+#
+# These settings affect some overall phrasing and looks,
+# which are most visible in the welcome page.
+
+# This selects between different welcome texts. When false, uses
+# the traditional "Welcome to the %1 installer.", and when true,
+# uses "Welcome to the Calamares installer for %1." This allows
+# to distinguish this installer from other installers for the
+# same distribution.
+welcomeStyleCalamares:   false
+
+# Should the welcome image (productWelcome, below) be scaled
+# up beyond its natural size? If false, the image does not grow
+# with the window but remains the same size throughout (this
+# may have surprising effects on HiDPI monitors).
+welcomeExpandingLogo:   true
+
+### WINDOW CONFIGURATION
+#
+# The settings here affect the placement of the Calamares
+# window through hints to the window manager and initial
+# sizing of the Calamares window.
+
+# Size and expansion policy for Calamares.
+#  - "normal" or unset, expand as needed, use *windowSize*
+#  - "fullscreen", start as large as possible, ignore *windowSize*
+#  - "noexpand", don't expand automatically, use *windowSize*
+windowExpanding:    normal
+
+# Size of Calamares window, expressed as w,h. Both w and h
+# may be either pixels (suffix px) or font-units (suffix em).
+#   e.g.    "800px,600px"
+#           "60em,480px"
+# This setting is ignored if "fullscreen" is selected for
+# *windowExpanding*, above. If not set, use constants defined
+# in CalamaresUtilsGui, 800x520.
+windowSize: 800px,520px
+
+# Placement of Calamares window. Either "center" or "free".
+# Whether "center" actually works does depend on the window
+# manager in use (and only makes sense if you're not using
+# *windowExpanding* set to "fullscreen").
+windowPlacement: center
+
+### PANELS CONFIGURATION
+#
+# Calamares has a main content area, and two panels (navigation
+# and progress / sidebar). The panels can be controlled individually,
+# or switched off. If both panels are switched off, the layout of
+# the main content area loses its margins, on the assumption that
+# you're doing something special.
+
+# Kind of sidebar (panel on the left, showing progress).
+#  - "widget" or unset, use traditional sidebar (logo, items)
+#  - "none", hide it entirely
+#  - "qml", use calamares-sidebar.qml from branding folder
+# In addition, you **may** specify a side, separated by a comma,
+# from the kind. Valid sides are:
+#  - "left" (if not specified, uses this)
+#  - "right"
+#  - "top"
+#  - "bottom"
+# For instance, "widget,right" is valid; so is "qml", which defaults
+# to putting the sidebar on the left. Also valid is "qml,top".
+# While "widget,top" is valid, the widgets code is **not** flexible
+# and results will be terrible.
+sidebar: widget
+
+# Kind of navigation (button panel on the bottom).
+#  - "widget" or unset, use traditional navigation
+#  - "none", hide it entirely
+#  - "qml", use calamares-navigation.qml from branding folder
+# In addition, you **may** specify a side, separated by a comma,
+# from the kind. The same sides are valid as for *sidebar*,
+# except the default is *bottom*.
+navigation: widget
+
+
+### STRINGS, IMAGES AND COLORS
+#
+# This section contains the "branding proper" of names
+# and images, rather than global-look settings.
+
+# These are strings shown to the user in the user interface.
+# There is no provision for translating them -- since they
+# are names, the string is included as-is.
+#
+# The four Url strings are the Urls used by the buttons in
+# the welcome screen, and are not shown to the user. Clicking
+# on the "Support" button, for instance, opens the link supportUrl.
+# If a Url is empty, the corresponding button is not shown.
+#
+# bootloaderEntryName is how this installation / distro is named
+# in the boot loader (e.g. in the GRUB menu).
+#
+# These strings support substitution from /etc/os-release
+# if KDE Frameworks 5.58 are available at build-time. When
+# enabled, ${varname} is replaced by the equivalent value
+# from os-release. All the supported var-names are in all-caps,
+# and are listed on the FreeDesktop.org site,
+#       https://www.freedesktop.org/software/systemd/man/os-release.html
+# Note that ANSI_COLOR and CPE_NAME don't make sense here, and
+# are not supported (the rest are). Remember to quote the string
+# if it contains substitutions, or you'll get YAML exceptions.
+#
+# The *Url* entries are used on the welcome page, and they
+# are visible as buttons there if the corresponding *show* keys
+# are set to "true" (they can also be overridden).
+strings:
+    productName:         "${NAME}"
+    shortProductName:    Generic
+    version:             2023.3 LTS
+    shortVersion:        2023.3
+    versionedName:       Fancy GNU/Linux 2023.3 LTS "Venomous Vole"
+    shortVersionedName:  FancyGL 2023.3
+    bootloaderEntryName: FancyGL
+    productUrl:          https://calamares.io/
+    supportUrl:          https://codeberg.org/Calamares/calamares/wiki
+    knownIssuesUrl:      https://codeberg.org/Calamares/calamares/issues
+    releaseNotesUrl:     https://calamares.io/news/
+    donateUrl:           https://docs.codeberg.org/improving-codeberg/donate/
+
+# These images are loaded from the branding module directory.
+#
+# productBanner is an optional image, which if present, will be shown
+#       on the welcome page of the application, above the welcome text.
+#       It is intended to have a width much greater than height.
+#       It is displayed at 64px height (also on HiDPI).
+#       Recommended size is 64px tall, and up to 460px wide.
+# productIcon is used as the window icon, and will (usually) be used
+#       by the window manager to represent the application. This image
+#       should be square, and may be displayed by the window manager
+#       as small as 16x16 (but possibly larger).
+# productLogo is used as the logo at the top of the left-hand column
+#       which shows the steps to be taken. The image should be square,
+#       and is displayed at 80x80 pixels (also on HiDPI).
+# productWallpaper is an optional image, which if present, will replace
+#       the normal solid background on every page of the application.
+#       It can be any size and proportion,
+#       and will be tiled to fit the entire window.
+#       For a non-tiled wallpaper, the size should be the same as
+#       the overall window, see *windowSize* above (800x520).
+# productWelcome is shown on the welcome page of the application in
+#       the middle of the window, below the welcome text. It can be
+#       any size and proportion, and will be scaled to fit inside
+#       the window. Use `welcomeExpandingLogo` to make it non-scaled.
+#       Recommended size is 320x150.
+#
+# These filenames can also use substitutions from os-release (see above).
+images:
+    # productBanner:       "banner.png"
+    productIcon:         "squid.png"
+    productLogo:         "squid.png"
+    # productWallpaper:    "wallpaper.png"
+    productWelcome:      "languages.png"
+
+# Colors for text and background components.
+#
+#  - SidebarBackground is the background of the sidebar
+#  - SidebarText is the (foreground) text color
+#  - SidebarBackgroundCurrent sets the background of the current step.
+#    Optional, and defaults to the application palette.
+#  - SidebarTextCurrent is the text color of the current step.
+#
+# These colors can **also** be set through the stylesheet, if the
+# branding component also ships a stylesheet.qss. Then they are
+# the corresponding CSS attributes of #sidebarApp.
+style:
+   SidebarBackground:        "#292F34"
+   SidebarText:              "#FFFFFF"
+   SidebarTextCurrent:       "#292F34"
+   SidebarBackgroundCurrent: "#D35400"
+
+### SLIDESHOW
+#
+# The slideshow is displayed during execution steps (e.g. when the
+# installer is actually writing to disk and doing other slow things).
+
+# The slideshow can be a QML file (recommended) which can display
+# arbitrary things -- text, images, animations, or even play a game --
+# during the execution step. The QML **is** abruptly stopped when the
+# execution step is done, though, so maybe a game isn't a great idea.
+#
+# The slideshow can also be a sequence of images (not recommended unless
+# you don't want QML at all in your Calamares). The images are displayed
+# at a rate of 1 every 2 seconds during the execution step.
+#
+# To configure a QML file, list a single filename:
+#   slideshow:               "show.qml"
+# To configure images, like the filenames (here, as an inline list):
+#   slideshow: [ "/etc/calamares/slideshow/0.png", "/etc/logo.png" ]
+slideshow:               "show.qml"
+
+# There are two available APIs for a QML slideshow:
+#  - 1 (the default) loads the entire slideshow when the installation-
+#      slideshow page is shown and starts the QML then. The QML
+#      is never stopped (after installation is done, times etc.
+#      continue to fire).
+#  - 2 loads the slideshow on startup and calls onActivate() and
+#      onLeave() in the root object. After the installation is done,
+#      the show is stopped (first by calling onLeave(), then destroying
+#      the QML components).
+#
+# An image slideshow does not need to have the API defined.
+slideshowAPI: 2
+
+
+# These options are to customize online uploading of logs to pastebins:
+#  - type      : Defines the kind of pastebin service to be used. Currently
+#                it accepts two values:
+#                - none    :    disables the pastebin functionality
+#                - fiche   :    use fiche pastebin server
+#  - url       : Defines the address of pastebin service to be used.
+#                Takes string as input. Important bits are the host and port,
+#                the scheme is not used.
+#  - sizeLimit : Defines maximum size limit (in KiB) of log file to be pasted.
+#                The option must be set, to have the log option work.
+#                Takes integer as input. If < 0, no limit will be forced,
+#                else only last (approximately) 'n' KiB of log file will be pasted.
+#                Please note that upload size may be slightly over the limit (due
+#                to last minute logging), so provide a suitable value.
+uploadServer :
+    type :    "fiche"
+    url :     "http://termbin.com:9999"
+    sizeLimit : -1

airootfs/usr/share/calamares/branding/default/languages.png.license

@@ -0,0 +1,2 @@
+SPDX-FileCopyrightText: 2015 Teo Mrnjavac <teo@kde.org>
+SPDX-License-Identifier: GPL-3.0-or-later

airootfs/usr/share/calamares/branding/default/show.qml

@@ -0,0 +1,77 @@
+/* === This file is part of Calamares - <https://calamares.io> ===
+ *
+ *   SPDX-FileCopyrightText: 2015 Teo Mrnjavac <teo@kde.org>
+ *   SPDX-FileCopyrightText: 2018 Adriaan de Groot <groot@kde.org>
+ *   SPDX-License-Identifier: GPL-3.0-or-later
+ *
+ *   Calamares is Free Software: see the License-Identifier above.
+ *
+ */
+
+import QtQuick 2.0;
+import calamares.slideshow 1.0;
+
+Presentation
+{
+    id: presentation
+
+    function nextSlide() {
+        console.log("QML Component (default slideshow) Next slide");
+        presentation.goToNextSlide();
+    }
+
+    Timer {
+        id: advanceTimer
+        interval: 1000
+        running: presentation.activatedInCalamares
+        repeat: true
+        onTriggered: nextSlide()
+    }
+
+    Slide {
+
+        Image {
+            id: background
+            source: "squid.png"
+            width: 200; height: 200
+            fillMode: Image.PreserveAspectFit
+            anchors.centerIn: parent
+        }
+        Text {
+            anchors.horizontalCenter: background.horizontalCenter
+            anchors.top: background.bottom
+            text: "This is a customizable QML slideshow.<br/>"+
+                  "Distributions should provide their own slideshow and list it in <br/>"+
+                  "their custom branding.desc file.<br/>"+
+                  "To create a Calamares presentation in QML, import calamares.slideshow,<br/>"+
+                  "define a Presentation element with as many Slide elements as needed."
+            wrapMode: Text.WordWrap
+            width: presentation.width
+            horizontalAlignment: Text.Center
+        }
+    }
+
+    Slide {
+        centeredText: qsTr("This is a second Slide element.")
+    }
+
+    Slide {
+        centeredText: qsTr("This is a third Slide element.")
+    }
+
+    // When this slideshow is loaded as a V1 slideshow, only
+    // activatedInCalamares is set, which starts the timer (see above).
+    //
+    // In V2, also the onActivate() and onLeave() methods are called.
+    // These example functions log a message (and re-start the slides
+    // from the first).
+    function onActivate() {
+        console.log("QML Component (default slideshow) activated");
+        presentation.currentSlide = 0;
+    }
+
+    function onLeave() {
+        console.log("QML Component (default slideshow) deactivated");
+    }
+
+}

airootfs/usr/share/calamares/branding/default/squid.png.license

@@ -0,0 +1,2 @@
+SPDX-FileCopyrightText: 2014 Teo Mrnjavac <teo@kde.org>
+SPDX-License-Identifier: GPL-3.0-or-later

airootfs/usr/share/calamares/branding/default/stylesheet.qss

@@ -0,0 +1,96 @@
+/*
+ * SPDX-FileCopyrightText: no
+ * SPDX-License-Identifier: CC0-1.0
+ */
+
+/*
+A branding component can ship a stylesheet (like this one)
+which is applied to parts of the Calamares user-interface.
+In principle, all parts can be styled through CSS.
+Missing parts should be filed as issues.
+
+The IDs are based on the object names in the C++ code.
+You can use the Debug Dialog to find out object names:
+  - Open the debug dialog
+  - Choose tab *Tools*
+  - Click *Widget Tree* button
+The list of object names is printed in the log.
+
+Documentation for styling Qt Widgets through a stylesheet
+can be found at
+    https://doc.qt.io/qt-5/stylesheet-examples.html
+    https://doc.qt.io/qt-5/stylesheet-reference.html
+In Calamares, styling widget classes is supported (e.g.
+using `QComboBox` as a selector).
+
+This example stylesheet has all the actual styling commented out.
+The examples are not exhaustive.
+
+*/
+
+/*** Generic Widgets.
+ *
+ * You can style **all** widgets of a given class by selecting
+ * the class name. Some widgets have specialized sub-selectors.
+ */
+
+/*
+QPushButton { background-color: green; }
+*/
+
+/*** Main application window.
+ *
+ * The main application window has the sidebar, which in turn
+ * contains a logo and a list of items -- note that the list
+ * can **not** be styled, since it has its own custom C++
+ * delegate code.
+ */
+
+/*
+#mainApp { }
+#sidebarApp { }
+#logoApp { }
+*/
+
+/*** Welcome module.
+ *
+ * There are plenty of parts, but the buttons are the most interesting
+ * ones (donate, release notes, ...). The little icon image can be
+ * styled through *qproperty-icon*, which is a little obscure.
+ * URLs can reference the QRC paths of the Calamares application
+ * or loaded via plugins or within the filesystem. There is no
+ * comprehensive list of available icons, though.
+ */
+
+/*
+QPushButton#aboutButton { qproperty-icon: url(:/data/images/release.svg); }
+#donateButton,
+#supportButton,
+#releaseNotesButton,
+#knownIssuesButton { qproperty-icon: url(:/data/images/help.svg); }
+*/
+
+/*** Partitioning module.
+ *
+ * Many moving parts, which you will need to experiment with.
+ */
+
+/*
+#bootInfoIcon { }
+#bootInfoLable { }
+#deviceInfoIcon { }
+#defineInfoLabel { }
+#scrollAreaWidgetContents { }
+#partitionBarView { }
+*/
+
+/*** Licensing module.
+ *
+ * The licensing module paints individual widgets for each of
+ * the licenses. The item can be collapsed or expanded.
+ */
+
+/*
+#licenseItem {  }
+#licenseItemFullText {  }
+*/

airootfs/usr/share/calamares/modules/bootloader.conf

@@ -0,0 +1,86 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Bootloader configuration. The bootloader is installed to allow
+# the system to start (and pick one of the installed operating
+# systems to run).
+#
+# Take note that Debian-derivatives that use unmodified GRUB EFI packages
+# should specifically set *efiBootloaderId* to "debian" because that is
+# hard-coded in `grubx64.efi`.
+---
+# A variable from global storage which overrides the value of efiBootLoader
+#efiBootLoaderVar: "packagechooser_bootloader"
+
+# Define which bootloader you want to use for EFI installations
+# Possible options are 'grub', 'sb-shim', 'refind` and 'systemd-boot'.
+efiBootLoader: "grub"
+
+# systemd-boot configuration files settings
+
+# kernelSearchPath is the path relative to the root of the install to search for kernels
+# A kernel is identified by finding files which match regular expression, kernelPattern
+kernelSearchPath: "/usr/lib/modules"
+kernelPattern: "^vmlinuz.*"
+
+# loaderEntries is an array of options to add to loader.conf for systemd-boot
+# please note that the "default" option is added programmatically
+loaderEntries:
+  - "timeout 5"
+  - "console-mode keep"
+
+# systemd-boot and refind support custom kernel params
+kernelParams: [ "quiet" ]
+
+# A list of kernel names that refind should accept as kernels
+#refindKernelList: [ "linux","linux-lts","linux-zen","linux-hardened" ]
+
+# GRUB 2 binary names and boot directory
+# Some distributions (e.g. Fedora) use grub2-* (resp. /boot/grub2/) names.
+# These names are also used when using sb-shim, since that needs some
+# GRUB functionality (notably grub-probe) to work. As needed, you may use
+# complete paths like `/usr/bin/efibootmgr` for the executables.
+#
+grubInstall: "grub-install"
+grubMkconfig: "grub-mkconfig"
+grubCfg: "/boot/grub/grub.cfg"
+grubProbe: "grub-probe"
+efiBootMgr: "efibootmgr"
+
+# Optionally set the bootloader ID to use for EFI. This is passed to
+# grub-install --bootloader-id.
+#
+# If not set here, the value from bootloaderEntryName from branding.desc
+# is used, with problematic characters (space and slash) replaced.
+#
+# The ID is also used as a directory name within the EFI environment,
+# and the bootloader is copied from /boot/efi/EFI/<dirname>/ . When
+# setting the option here, keep in mind that the name is sanitized
+# (problematic characters, see above, are replaced).
+#
+# There are some special words possible at the end of *efiBootloaderId*:
+#   ${SERIAL} can be used to obtain a uniquely-numbered suffix
+#       that is added to the Id (yielding, e.g., `dirname1` or `dirname72`)
+#   ${RANDOM} can be used to obtain a unique 4-digit hex suffix
+#   ${PHRASE} can be used to obtain a unique 1-to-3-word suffix
+#       from a dictionary of space-themed words
+# These words must be at the **end** of the *efiBootloaderId* value.
+# There must also be at most one of them. If there is none, no suffix-
+# processing is done and the *efiBootloaderId* is used unchanged.
+#
+# NOTE: Debian derivatives that use the unmodified Debian GRUB EFI
+#       packages may need to set this to "debian" because that is
+#       hard-coded in `grubx64.efi`.
+#
+# efiBootloaderId: "dirname"
+
+# Optionally install a copy of the GRUB EFI bootloader as the EFI
+# fallback loader (either bootia32.efi or bootx64.efi depending on
+# the system). This may be needed on certain systems (Intel DH87MC
+# seems to be the only one). If you set this to false, take care
+# to add another module to optionally install the fallback on those
+# boards that need it.
+installEFIFallback: true
+
+# Optionally install both BIOS and UEFI GRUB bootloaders.
+installHybridGRUB: false

airootfs/usr/share/calamares/modules/contextualprocess.conf

@@ -0,0 +1,63 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Configuration for the contextual process job.
+#
+# Contextual processes are based on **global** configuration values.
+# When a given global value (string) equals a given value, then
+# the associated command is executed.
+#
+# Configuration consists of keys for global variable names (except
+# *dontChroot* and *timeout*), and the sub-keys are strings to compare
+# to the variable's value. If the variable has that particular value, the
+# corresponding value (script) is executed. The top-level keys *dontChroot*
+# and *timeout* are not global variable names. They have
+# meaning just like in shellprocess.conf, that is they
+# determine **where** the command runs and how long it has.
+#
+# The variable **may** contain dots, in which case the dot is used
+# to select into maps inside global storage, e.g.
+#
+#   - *firmwareType* is a simple global name
+#   - *branding.bootloader* is the *bootloader* value in the *branding* map
+#
+# Only a few global storage entries have well-defined sub-maps;
+# branding is one of them, and *filesystem_use* is another. Note that
+# variable names with dots **must** be quoted, or you will get a YAML error.
+#
+#
+# You can check for an empty value with "".
+#
+# As a special case, the value-check "*" matches any value, but **only**
+# if no other value-check matches. Use it as an *else* form for value-
+# checks. Take care to put the asterisk in quotes. The value-check "*"
+# **also** matches a literal asterisk as value; a confusing corner case
+# is checking for an asterisk **and** having a wildcard match with
+# different commands. This is currently not possible.
+#
+# Global configuration variables are not checked in a deterministic
+# order, so do not rely on commands from one variable-check to
+# always happen before (or after) checks on another
+# variable. Similarly, the value-equality checks are not
+# done in a deterministic order, but all of the value-checks
+# for a given variable happen together. As a special case, the
+# value-check for "*" (the *else* case) happens after all of the
+# other value-checks, and only matches if none of the others do.
+#
+# The values after a value sub-keys are the same kinds of values
+# as can be given to the *script* key in the shellprocess module.
+# See shellprocess.conf for documentation on valid values and how
+# variables are expanded in those commands.
+---
+dontChroot: false
+firmwareType:
+    efi:
+        -   "-pkg remove efi-firmware"
+        -   command: "-mkinitramfsrd -abgn"
+            timeout: 120  # This is slow
+    bios:   "-pkg remove bios-firmware"
+    "":     "/bin/false no-firmware-type-set"
+    "*":    "/bin/false some-other-firmware-value"
+"branding.shortVersion":
+    "2020.2": "/bin/false february"
+    "2019.4": "/bin/true april"

airootfs/usr/share/calamares/modules/displaymanager.conf

@@ -0,0 +1,80 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Configure one or more display managers (e.g. SDDM)
+# with a "best effort" approach.
+#
+# This module also sets up autologin, if the feature is enabled in
+# globalstorage (where it would come from the users page).
+---
+# The DM module attempts to set up all the DMs found in this list, in the
+# precise order listed. The displaymanagers list can also be set in
+# globalstorage, and in that case it overrides the setting here.
+#
+# If *sysconfigSetup* is set to *true* (see below, only relevant for
+# openSUSE derivatives) then this list is ignored and only sysconfig
+# is attempted. You can also list "sysconfig" in this list instead.
+#
+displaymanagers:
+  - slim
+  - sddm
+  - lightdm
+  - gdm
+  - mdm
+  - lxdm
+  - greetd
+
+# Enable the following settings to force a desktop environment
+# in your displaymanager configuration file. This will attempt
+# to configure the given DE (without checking if it is installed).
+# The DM configuration for each potential DM may **or may not**
+# support configuring a default DE, so the keys are mandatory
+# but their interpretation is up to the DM configuration.
+#
+# Subkeys of *defaultDesktopEnvironment* are (all mandatory):
+#  - *executable* a full path to an executable
+#  - *desktopFile* a .desktop filename
+#
+# If this is **not** set, then Calamares will look for installed
+# DE's and pick the first one it finds that is actually installed.
+#
+# If this **is** set, and the *executable* key doesn't point to
+# an installed file, then the .desktop file's TryExec key is
+# used instead.
+#
+
+#defaultDesktopEnvironment:
+#    executable: "startkde"
+#    desktopFile: "plasma"
+
+#If true, try to ensure that the user, group, /var directory etc. for the
+#display manager are set up correctly. This is normally done by the distribution
+#packages, and best left to them. Therefore, it is disabled by default.
+basicSetup: false
+
+# If true, setup autologin for openSUSE. This only makes sense on openSUSE
+# derivatives or other systems where /etc/sysconfig/displaymanager exists.
+#
+# The preferred way to pick sysconfig is to just list it in the
+# *displaymanagers* list (as the only one).
+#
+sysconfigSetup: false
+
+# Some DMs have specific settings. These can be customized here.
+#
+# greetd has configurable user and group; the user and group is created if it
+# does not exist, and the user is set as default-session user.
+#
+# Some greeters for greetd (e.g gtkgreet or regreet) have support for a user's GTK CSS style to change appearance.
+#
+# lightdm has a list of greeters to look for, preferring them in order if
+# they are installed (if not, picks the alphabetically first greeter that is installed).
+#
+greetd:
+  greeter_user: "tom_bombadil"
+  greeter_group: "wheel"
+  greeter_css_location: "/etc/greetd/style.css"
+lightdm:
+  preferred_greeters: ["lightdm-greeter.desktop", "slick-greeter.desktop"]
+sddm:
+  configuration_file: "/etc/sddm.conf"

airootfs/usr/share/calamares/modules/finished.conf

@@ -0,0 +1,47 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Configuration for the "finished" page, which is usually shown only at
+# the end of the installation (successful or not).
+---
+# DEPRECATED
+#
+# The finished page can hold a "restart system now" checkbox.
+# If this is false, no checkbox is shown and the system is not restarted
+# when Calamares exits.
+# restartNowEnabled: true
+
+# DEPRECATED
+#
+# Initial state of the checkbox "restart now". Only relevant when the
+# checkbox is shown by restartNowEnabled.
+# restartNowChecked: false
+
+# Behavior of the "restart system now" button.
+#
+# There are four usable values:
+#   - never
+#       Does not show the button and does not restart.
+#       This matches the old behavior with restartNowEnabled=false.
+#   - user-unchecked
+#       Shows the button, defaults to unchecked, restarts if it is checked.
+#       This matches the old behavior with restartNowEnabled=true and restartNowChecked=false.
+#   - user-checked
+#       Shows the button, defaults to checked, restarts if it is checked.
+#       This matches the old behavior with restartNowEnabled=true and restartNowChecked=true.
+#   - always
+#       Shows the button, checked, but the user cannot change it.
+#       This is new behavior.
+#
+# The three combinations of legacy values are still supported.
+restartNowMode: user-unchecked
+
+# If the checkbox is shown, and the checkbox is checked, then when
+# Calamares exits from the finished-page it will run this command.
+# If not set, falls back to "shutdown -r now".
+restartNowCommand: "systemctl -i reboot"
+
+# When the last page is (successfully) reached, send a DBus notification
+# to the desktop that the installation is done. This works only if the
+# user as whom Calamares is run, can reach the regular desktop session bus.
+notifyOnFinished: false

airootfs/usr/share/calamares/modules/finishedq.conf

@@ -0,0 +1,36 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Configuration for the "finishedq" page, which is usually shown only at
+# the end of the installation (successful or not).
+#
+# See the documentation for the "finished" module for a full explanation
+# of the configuration options; the description here applies primarily
+# to the use that the QML makes of them.
+---
+# Behavior of the "restart system now" button.
+#
+# The example QML for this module offers a "Restart Now" button,
+# which the user can click on. It calls directly to the restart
+# function. If the user closes the installer in some other way,
+# (the "Done" button or close-window) a restart **might** happen:
+#
+#   - never
+#       Do not restart (this will also block the "Restart Now" button,
+#       so it is not very useful)
+#   - user-unchecked
+#       Do not restart on other ways of closing the window. No checkbox
+#       is shown in the example QML, so there is no way for the user to
+#       express a choice -- except by clicking the "Restart Now" button.
+#   - user-checked
+#       Do restart on other ways of closing the window. This makes close
+#       and "Restart Now" do the same thing. No checkbox is shown by the QML,
+#       so the machine will **always** restart.
+#   - always
+#       Same as above.
+#
+# For the **specific** example QML included with this module, only
+# *user-unchecked* really makes sense.
+restartNowMode: user-unchecked
+restartNowCommand: "systemctl -i reboot"
+notifyOnFinished: false

airootfs/usr/share/calamares/modules/fsresizer.conf

@@ -0,0 +1,52 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Module that resizes a single FS to fill the entire (rest) of
+# a device. This is used in OEM situations where an image is
+# flashed onto an SD card (or similar) and used to boot a device,
+# after which the FS should expand to fill the SD card.
+#
+# Example: a distro produces a 6GiB large image that is
+# written to an 8GiB SD card; the FS should expand to take
+# advantage of the unused 2GiB. The FS should expand much
+# more if the same image is written to a 16GiB card.
+---
+
+# Which FS needs to be grown? Choose one way to identify it:
+#  - *fs* names a mount point which should already be mounted
+#    in the system.
+#  - *dev* names a device
+fs: /
+# dev: /dev/mmcblk0p1
+
+# How much of the total remaining space should the FS use?
+# The only sensible amount is "all of it". The value is
+# in percent, so set it to 100. Perhaps a fixed size is
+# needed (that would be weird though, since you don't know
+# how big the card is), use MiB as suffix in that case.
+# If missing, then it's assumed to be 0, and no resizing
+# will happen.
+#
+# Percentages apply to **available space**.
+size: 100%
+
+# Resizing might not be worth it, though. Set the minimum
+# that it must grow; if it cannot grow that much, the
+# resizing is skipped. Can be in percentage or absolute
+# size, as above. If missing, then it's assumed to be 0,
+# which means resizing is always worthwhile.
+#
+# If *atleast* is not zero, then the setting *required*,
+# below, becomes relevant.
+#
+# Percentages apply to **total device size**.
+#atleast: 1000MiB
+
+# When *atleast* is not zero, then the resize may be
+# recommended (the default) or **required**. If the
+# resize is required and cannot be carried out (because
+# there's not enough space), then that is a fatal
+# error for the installer. By default, resize is only
+# recommended and it is not an error for no resize to be
+# carried out.
+required: false

airootfs/usr/share/calamares/modules/fstab.conf

@@ -0,0 +1,37 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Creates /etc/fstab and /etc/crypttab in the target system.
+# Also creates mount points for all the filesystems.
+#
+# When creating fstab entries for a filesystem, this module
+# uses the options previously defined in the mount module
+---
+
+# Additional options added to each line in /etc/crypttab
+crypttabOptions: luks
+# For Debian and Debian-based distributions, change the above line to:
+# crypttabOptions: luks,keyscript=/bin/cat
+
+# Options for handling /tmp in /etc/fstab
+# Currently default (required) and ssd are supported
+# The corresponding string can contain the following variables:
+# tmpfs: true or tmpfs: false to either mount /tmp as tmpfs or not
+# options: "<mount options>"
+#
+# Example:
+#tmpOptions:
+#    default:
+#        tmpfs: false
+#        options: ""
+#    ssd:
+#        tmpfs: true
+#        options: "defaults,noatime,mode=1777"
+#
+tmpOptions:
+    default:
+        tmpfs: false
+        options: ""
+    ssd:
+        tmpfs: true
+        options: "defaults,noatime,mode=1777"

airootfs/usr/share/calamares/modules/grubcfg.conf

@@ -0,0 +1,51 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Create, overwrite or update /etc/default/grub in the target system.
+#
+# Write lines to /etc/default/grub (in the target system) based
+# on calculated values and the values set in the *defaults* key
+# in this configuration file.
+#
+# Calculated values are:
+#   - GRUB_DISTRIBUTOR,   branding module, *bootloaderEntryName* (this
+#     string is sanitized, and see also setting *keep_distributor*)
+#   - GRUB_ENABLE_CRYPTODISK, based on the presence of filesystems
+#     that use LUKS
+#   - GRUB_CMDLINE_LINUX_DEFAULT, adding LUKS setup and plymouth
+#     support to the kernel.
+
+---
+# If set to true, always creates /etc/default/grub from scratch even if the file
+# already existed. If set to false, edits the existing file instead.
+overwrite: false
+
+# If set to true, prefer to write files in /etc/default/grub.d/
+# rather than the single file /etc/default/grub. If this is set,
+# Calamares will write /etc/default/grub.d/00calamares.cfg instead.
+prefer_grub_d: false
+
+# If set to true, an **existing** setting for GRUB_DISTRIBUTOR is
+# kept, not updated to the *bootloaderEntryName* from the branding file.
+# Use this if the GRUB_DISTRIBUTOR setting in the file is "smart" in
+# some way (e.g. uses shell-command substitution).
+keep_distributor: false
+
+# The default kernel params that should always be applied.
+# This is an array of strings. If it is unset, the default is
+# `["quiet"]`. To avoid the default, explicitly set this key
+# to an empty list, `[]`.
+kernel_params: [ "quiet" ]
+
+# Default entries to write to /etc/default/grub if it does not exist yet or if
+# we are overwriting it.
+#
+defaults:
+    GRUB_TIMEOUT: 5
+    GRUB_DEFAULT: "saved"
+    GRUB_DISABLE_SUBMENU: true
+    GRUB_TERMINAL_OUTPUT: "console"
+    GRUB_DISABLE_RECOVERY: true
+
+# Set to true to force defaults to be used even when not overwriting
+always_use_defaults: false

airootfs/usr/share/calamares/modules/initcpio.conf

@@ -0,0 +1,26 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Run mkinitcpio(8) with the given preset value
+---
+# This key defines the kernel to be loaded.
+# It can have the following values:
+#  - the name of a single mkinitcpio preset
+#  - empty or unset
+#  - the literal string "all"
+#
+# If kernel is set to "all" or empty/unset then mkinitpio is called for all
+# kernels.  Otherwise it is called with a single preset with the value
+# contained in kernel.
+#
+kernel: linux
+
+# Set this to true to turn off mitigations for lax file
+# permissions on initramfs (which, in turn, can compromise
+# your LUKS encryption keys, CVS-2019-13179).
+#
+# If your initramfs are stored in the EFI partition or another non-POSIX
+# filesystem, this has no effect as the file permissions cannot be changed.
+# In this case, ensure the partition is mounted securely.
+#
+be_unsafe: false

airootfs/usr/share/calamares/modules/initcpiocfg.conf

@@ -0,0 +1,38 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# The initcpiocfg module is responsible for the configuration of mkinitcpio.conf.  Typically this
+# module is used in conjunction with the initcpio module to generate the boot image when using mkinitcpio
+---
+#
+# Determines if the systemd versions of the hooks should be used.  This is false by default.
+#
+# Please note that using the systemd hooks result in no access to the emergency recovery shell
+useSystemdHook: false
+
+#
+# Modifications to the standard list of hooks.
+#
+# There are three subkeys:
+# - prepend, which puts hooks at the beginning of the
+#   list of hooks, in the order specified here,
+# - append, which adds hooks at the end of the list of
+#   hooks, in the order specified here,
+# - remove, which removes hooks from the list of hooks,
+#   wherever they may be.
+#
+# The example configuration here yields bogus, <stuff>, bogus
+# initially, and then removes that hook again.
+#
+hooks:
+    prepend: [ bogus ]
+    append: [ bogus ]
+    remove: [ bogus ]
+
+#
+# In some cases, you may want to use a different source
+# file than /etc/mkinitcpio.conf , e.g. because the live system
+# does not match the target in a useful way. If unset or
+# empty, defaults to /etc/mkinitcpio.conf
+#
+source: "/etc/mkinitcpio.conf"

airootfs/usr/share/calamares/modules/initramfs.conf

@@ -0,0 +1,26 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Run mkinitcpio(8) with the given preset value
+---
+# This key defines the kernel to be loaded.
+# It can have the following values:
+#  - the name of a single mkinitcpio preset
+#  - empty or unset
+#  - the literal string "all"
+#
+# If kernel is set to "all" or empty/unset then mkinitpio is called for all
+# kernels.  Otherwise it is called with a single preset with the value
+# contained in kernel.
+#
+kernel: linux
+
+# Set this to true to turn off mitigations for lax file
+# permissions on initramfs (which, in turn, can compromise
+# your LUKS encryption keys, CVS-2019-13179).
+#
+# If your initramfs are stored in the EFI partition or another non-POSIX
+# filesystem, this has no effect as the file permissions cannot be changed.
+# In this case, ensure the partition is mounted securely.
+#
+be_unsafe: false

airootfs/usr/share/calamares/modules/keyboard.conf

@@ -0,0 +1,47 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# NOTE: you must have ckbcomp installed and runnable
+#       on the live system, for keyboard layout previews.
+---
+# The name of the file to write X11 keyboard settings to
+# The default value is the name used by upstream systemd-localed.
+# Relative paths are assumed to be relative to /etc/X11/xorg.conf.d
+xOrgConfFileName: "/etc/X11/xorg.conf.d/00-keyboard.conf"
+
+# The path to search for keymaps converted from X11 to kbd format.
+# Common paths for this are:
+#   - /lib/kbd/keymaps/xkb
+#   - /usr/share/kbd/keymaps/xkb
+# Leave this empty if the setting does not make sense on your distribution.
+#
+convertedKeymapPath: "/lib/kbd/keymaps/xkb"
+
+# Write keymap configuration to /etc/default/keyboard, usually
+# found on Debian-related systems.
+# Defaults to true if nothing is set.
+#writeEtcDefaultKeyboard:   true
+
+# Use the Locale1 service instead of directly managing configuration files.
+# This is the modern mechanism for configuring the systemwide keyboard layout,
+# and works on Wayland compositors to set the current layout.
+# Defaults to false on X11 and true otherwise.
+#useLocale1: true
+
+# Guess the default layout from the user locale. If false, keeps the current
+# OS keyboard layout as the default (useful if the layout is pre-configured).
+#guessLayout: true
+
+# Things that should be configured.
+configure:
+    # Configure KWin (KDE Plasma) directly by editing the
+    # configuration file and informing KWin over DBus. This is
+    # useful in a system that uses Wayland but does **not** connect
+    # locale1 with KWin.
+    #
+    # Systems that use KDE Plasma Wayland and locale1 can instead start the
+    # compositor KWin with command-line argument `--locale1`. That
+    # argument makes this configuration option unnecessary.
+    kwin: false
+    # Configure keyboard when using Wayland with Gnome on Ubuntu 24.10+
+    gnome: false

airootfs/usr/share/calamares/modules/keyboardq.conf

@@ -0,0 +1,19 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# NOTE: you must have ckbcomp installed and runnable
+#       on the live system, for keyboard layout previews.
+---
+# The name of the file to write X11 keyboard settings to
+# The default value is the name used by upstream systemd-localed.
+# Relative paths are assumed to be relative to /etc/X11/xorg.conf.d
+xOrgConfFileName: "/etc/X11/xorg.conf.d/00-keyboard.conf"
+
+# The path to search for keymaps converted from X11 to kbd format
+# Leave this empty if the setting does not make sense on your distribution.
+convertedKeymapPath: "/lib/kbd/keymaps/xkb"
+
+# Write keymap configuration to /etc/default/keyboard, usually
+# found on Debian-related systems.
+# Defaults to true if nothing is set.
+#writeEtcDefaultKeyboard:   true

airootfs/usr/share/calamares/modules/license.conf

@@ -0,0 +1,53 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Configuration file for License viewmodule, Calamares
+# Syntax is YAML 1.2
+---
+# Define a list of licenses which may / must be accepted before continuing.
+#
+# Each entry in this list has the following keys:
+#   - id        Entry identifier, must be unique. Not user visible. YAML: string.
+#   - name      Pretty name for the software product, user visible and untranslatable. YAML: string.
+#   - vendor    Pretty name for the software vendor, user visible and untranslatable. YAML: string, optional, default is empty.
+#   - type      Package type identifier for presentation, not user visible but affects user visible strings. YAML: string.
+#               values: driver, gpudriver, browserplugin, codec, package, software; optional, default is software.
+#   - required  If set to true, the user cannot proceed without accepting this license. YAML: boolean, optional, default is false.
+#   - url       A URL for the license; a remote URL is not shown in Calamares, but a link
+#               to the URL is provided, which opens in the default web browser. A local
+#               URL (i.e. file:///) assumes that the contents are HTML or plain text, and
+#               displays the license in-line. YAML: string, mandatory.
+#   - expand    A boolean value only relevant for **local** URLs. If true,
+#               the license text is displayed in "expanded" form by
+#               default, rather than requiring the user to first open it up.
+#               YAML: boolean, optional, default is false.
+entries:
+- id:       nvidia
+  name:     Nvidia
+  vendor:   Nvidia Corporation
+  type:     driver
+  url:      http://developer.download.nvidia.com/cg/Cg_3.0/license.pdf
+  required: false
+- id:       amd
+  name:     Catalyst
+  vendor:   "Advanced Micro Devices, Inc."
+  type:     gpudriver
+  url:      http://support.amd.com/en-us/download/eula
+  required: false
+- id:       flashplugin
+  name:     Adobe Flash
+  vendor:   Adobe Systems Incorporated
+  type:     browserplugin
+  url:      http://www.adobe.com/products/eulas/pdfs/PlatformClients_PC_WWEULA_Combined_20100108_1657.pdf
+  required: true
+# This example uses a file: link. This example uses a relative link, which
+# is relative to where you run Calamares. Assuming you run it from build/
+# as part of your testing, you'll get the LICENSE text for Calamares
+# (which is the text of the GPLv3, not proprietary at all).
+- id:   mine_mine
+  name: Calamares Proprietary License
+  vendor: Calamares, Inc.
+  type: software
+  required: true
+  url: file:../LICENSE
+  expand: true

airootfs/usr/share/calamares/modules/locale.conf

@@ -0,0 +1,131 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+---
+# These settings are used to set your default system time zone.
+# Time zones are usually located under /usr/share/zoneinfo and
+# provided by the 'tzdata' package of your Distribution.
+#
+# Distributions using systemd can list available
+# time zones by using the timedatectl command.
+#    timedatectl list-timezones
+#
+# The starting timezone (e.g. the pin-on-the-map) when entering
+# the locale page can be set through keys *region* and *zone*.
+# If either is not set, defaults to America/New_York.
+#
+# Note that useSystemTimezone and GeoIP settings can change the
+# starting time zone.
+#
+region:                     "America"
+zone:                       "New_York"
+
+# Instead of using *region* and *zone* specified above,
+# you can use the system's notion of the timezone, instead.
+# This can help if your system is automatically configured with
+# a sensible TZ rather than chasing a fixed default.
+#
+# The default is false.
+#
+# useSystemTimezone: true
+
+# Should changing the system location (e.g. clicking around on the timezone
+# map) immediately reflect the changed timezone in the live system?
+# By default, installers (with a target system) do, and setup (e.g. OEM
+# configuration) does not, but you can switch it on here (or off, if
+# you think it's annoying in the installer).
+#
+# Note that not all systems support live adjustment.
+#
+# adjustLiveTimezone:   true
+
+# System locales are detected in the following order:
+#
+#  - /usr/share/i18n/SUPPORTED
+#  - localeGenPath (defaults to /etc/locale.gen if not set)
+#  - `locale -a` output
+#
+# Enable only when your Distribution is using a
+# custom path for locale.gen
+#
+#localeGenPath:             "/etc/locale.gen"
+
+# GeoIP based Language settings: Leave commented out to disable GeoIP.
+#
+# GeoIP needs a working Internet connection.
+# This can be managed from `welcome.conf` by adding
+# internet to the list of required conditions. (The welcome
+# module can also do its own GeoIP lookups, independently
+# of the lookup done here. The lookup in the welcome module
+# is used to establish language; this one is for timezone).
+#
+# The configuration is in three parts:
+# - a *style*, which can be "json" or "xml" depending on the
+#   kind of data returned by the service, and
+# - a *url* where the data is retrieved, and
+# - an optional *selector*
+#   to pick the right field out of the returned data (e.g. field
+#   name in JSON or element name in XML).
+#
+# The default selector (when the setting is blank) is picked to
+# work with existing JSON providers (which use "time_zone") and
+# Ubiquity's XML providers (which use "TimeZone").
+#
+# If the service configured via *url* uses
+# a different attribute name (e.g. "timezone") in JSON or a
+# different element tag (e.g. "<Time_Zone>") in XML, set the
+# selector to the name or tag to be used.
+#
+# In JSON:
+#  - if the string contains "." characters, this is used as a
+#    multi-level selector, e.g. "a.b" will select the timezone
+#    from data "{a: {b: "Europe/Amsterdam" } }".
+#  - each part of the string split by "." characters is used as
+#    a key into the JSON data.
+# In XML:
+#  - all elements with the named tag (e.g. all TimeZone) elements
+#    from the document are checked; the first one with non-empty
+#    text value is used.
+# Special case:
+#  - the *style* "fixed" is also supported. This ignores the data
+#    returned from the URL (but the URL must still be valid!)
+#    and just returns the value of the *selector*.
+#
+# An HTTP(S) request is made to *url*. The request should return
+# valid data in a suitable format, depending on *style*;
+# generally this includes a string value with the timezone
+# in <region>/<zone> format. For services that return data which
+# does not follow the conventions of "suitable data" described
+# below, *selector* may be used to pick different data.
+#
+# Suitable JSON data looks like
+# ```
+#    {"time_zone":"America/New_York"}
+# ```
+# Suitable XML data looks like
+# ```
+#    <Response><TimeZone>Europe/Brussels</TimeZone></Response>
+# ```
+#
+# To accommodate providers of GeoIP timezone data with peculiar timezone
+# naming conventions, the following cleanups are performed automatically:
+#  - backslashes are removed
+#  - spaces are replaced with _
+#
+# To disable GeoIP checking, either comment-out the entire geoip section,
+# or set the *style* key to an unsupported format (e.g. `none`).
+# Also, note the analogous feature in src/modules/welcome/welcome.conf.
+#
+geoip:
+    style:    "json"
+    url:      "https://geoip.kde.org/v1/calamares"
+    selector: ""  # leave blank for the default
+
+# For testing purposes, you could use *fixed* style, to see how Calamares
+# behaves in a particular zone:
+#
+# geoip:
+#     style:    "fixed"
+#     url:      "https://geoip.kde.org/v1/calamares"  # Still needs to be valid!
+#     selector: "America/Vancouver"  # this is the selected zone
+#

airootfs/usr/share/calamares/modules/localeq.conf

@@ -0,0 +1,100 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+---
+# This settings are used to set your default system time zone.
+# Time zones are usually located under /usr/share/zoneinfo and
+# provided by the 'tzdata' package of your Distribution.
+#
+# Distributions using systemd can list available
+# time zones by using the timedatectl command.
+#    timedatectl list-timezones
+#
+# The starting timezone (e.g. the pin-on-the-map) when entering
+# the locale page can be set through keys *region* and *zone*.
+# If either is not set, defaults to America/New_York.
+#
+region:                     "America"
+zone:                       "New_York"
+
+
+# System locales are detected in the following order:
+#
+#  - /usr/share/i18n/SUPPORTED
+#  - localeGenPath (defaults to /etc/locale.gen if not set)
+#  - 'locale -a' output
+#
+# Enable only when your Distribution is using an
+# custom path for locale.gen
+#
+#localeGenPath:             "PATH_TO/locale.gen"
+
+# GeoIP based Language settings: Leave commented out to disable GeoIP.
+#
+# GeoIP needs a working Internet connection.
+# This can be managed from `welcome.conf` by adding
+# internet to the list of required conditions.
+#
+# The configuration
+# is in three parts: a *style*, which can be "json" or "xml"
+# depending on the kind of data returned by the service, and
+# a *url* where the data is retrieved, and an optional *selector*
+# to pick the right field out of the returned data (e.g. field
+# name in JSON or element name in XML).
+#
+# The default selector (when the setting is blank) is picked to
+# work with existing JSON providers (which use "time_zone") and
+# Ubiquity's XML providers (which use "TimeZone").
+#
+# If the service configured via *url* uses
+# a different attribute name (e.g. "timezone") in JSON or a
+# different element tag (e.g. "<Time_Zone>") in XML, set this
+# string to the name or tag to be used.
+#
+# In JSON:
+#  - if the string contains "." characters, this is used as a
+#    multi-level selector, e.g. "a.b" will select the timezone
+#    from data "{a: {b: "Europe/Amsterdam" } }".
+#  - each part of the string split by "." characters is used as
+#    a key into the JSON data.
+# In XML:
+#  - all elements with the named tag (e.g. all TimeZone) elements
+#    from the document are checked; the first one with non-empty
+#    text value is used.
+#
+#
+# An HTTP(S) request is made to *url*. The request should return
+# valid data in a suitable format, depending on *style*;
+# generally this includes a string value with the timezone
+# in <region>/<zone> format. For services that return data which
+# does not follow the conventions of "suitable data" described
+# below, *selector* may be used to pick different data.
+#
+# Note that this example URL works, but the service is shutting
+# down in June 2018.
+#
+# Suitable JSON data looks like
+# ```
+#    {"time_zone":"America/New_York"}
+# ```
+# Suitable XML data looks like
+# ```
+#    <Response><TimeZone>Europe/Brussels</TimeZone></Response>
+# ```
+#
+# To accommodate providers of GeoIP timezone data with peculiar timezone
+# naming conventions, the following cleanups are performed automatically:
+#  - backslashes are removed
+#  - spaces are replaced with _
+#
+# Legacy settings "geoipStyle", "geoipUrl" and "geoipSelector"
+# in the top-level are still supported, but I'd advise against.
+#
+# To disable GeoIP checking, either comment-out the entire geoip section,
+# or set the *style* key to an unsupported format (e.g. `none`).
+# Also, note the analogous feature in src/modules/welcome/welcome.conf.
+#
+geoip:
+    style:    "json"
+    url:      "https://geoip.kde.org/v1/calamares"
+    selector: ""  # leave blank for the default

airootfs/usr/share/calamares/modules/luksbootkeyfile.conf

@@ -0,0 +1,14 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Luksbootkeyfile configuration. A key file is created for the
+# LUKS encrypted devices.
+---
+# Set Password-Based Key Derivation Function (PBKDF) algorithm
+# for LUKS keyslot.
+#
+# There are three usable specific values: pbkdf2, argon2i or argon2id.
+# There is one value equivalent to not setting it: default
+#
+# When not set (or explicitly set to "default"), the cryptsetup default is used
+luks2Hash: default

airootfs/usr/share/calamares/modules/luksopenswaphookcfg.conf

@@ -0,0 +1,7 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Writes an openswap configuration with LUKS settings to the given path
+---
+# Path of the configuration file to write (in the target system)
+configFilePath: /etc/openswap.conf

airootfs/usr/share/calamares/modules/machineid.conf

@@ -0,0 +1,56 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Machine-ID and other random data on the target system.
+#
+# This module can create a number of "random" things on the target:
+#  - a systemd machine-id file (hence the name of the Calamares module)
+#    with a random UUID.
+#  - a dbus machine-id file (or, optionally, link to the one from systemd)
+#  - an entropy file
+#
+---
+# Whether to create /etc/machine-id for systemd.
+# The default is *false*.
+systemd: true
+# If systemd is true, the kind of /etc/machine-id to create in the target
+#  - uuid (default) generates a UUID
+#  - systemd alias of uuid
+#  - blank creates the file but leaves it empty at 0 bytes
+#  - none alias of blank (use `systemd: false` if you don't want one at all)
+#  - literal-uninitialized creates the file and writes the string "uninitialized\n"
+systemd-style: uuid
+
+# Whether to create /var/lib/dbus/machine-id for D-Bus.
+# The default is *false*.
+dbus: true
+# Whether /var/lib/dbus/machine-id should be a symlink to /etc/machine-id
+# (ignored if dbus is false, or if there is no /etc/machine-id to point to).
+# The default is *false*.
+dbus-symlink: true
+
+# Copy entropy from the host? If this is set to *true*, then
+# any entropy file listed below will be copied from the host
+# if it exists. Non-existent files will be generated from
+# /dev/urandom . The default is *false*.
+entropy-copy: false
+# Which files to write (paths in the target). Each of these files is
+# either generated from /dev/urandom or copied from the host, depending
+# on the setting for *entropy-copy*, above.
+entropy-files:
+    - /var/lib/urandom/random-seed
+    - /var/lib/systemd/random-seed
+
+# Whether to create an entropy file /var/lib/urandom/random-seed
+#
+# DEPRECATED: list the file in entropy-files instead. If this key
+# exists and is set to *true*, a warning is printed and Calamares
+# behaves as if `/var/lib/urandom/random-seed` is listed in *entropy-files*.
+#
+# entropy: false
+
+# Whether to create a symlink for D-Bus
+#
+# DEPRECATED: set *dbus-symlink* with the same meaning instead.
+#
+# symlink: false

airootfs/usr/share/calamares/modules/mount.conf

@@ -0,0 +1,125 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Mount filesystems in the target (generally, before treating the
+# target as a usable chroot / "live" system). Filesystems are
+# automatically mounted from the partitioning module. Filesystems
+# listed here are **extra**. The filesystems listed in *extraMounts*
+# are mounted in all target systems.
+---
+# Extra filesystems to mount. The key's value is a list of entries; each
+# entry has five keys:
+#   - device    The device node to mount
+#   - fs (optional) The filesystem type to use
+#   - mountPoint Where to mount the filesystem
+#   - options (optional) An array of options to pass to mount
+#   - efi (optional) A boolean that when true is only mounted for UEFI installs
+#
+# The device is not mounted if the mountPoint is unset or if the fs is
+# set to unformatted.
+#
+extraMounts:
+    - device: proc
+      fs: proc
+      mountPoint: /proc
+    - device: sys
+      fs: sysfs
+      mountPoint: /sys
+    - device: /dev
+      mountPoint: /dev
+      options: [ bind ]
+    - device: tmpfs
+      fs: tmpfs
+      mountPoint: /run
+    - device: /run/udev
+      mountPoint: /run/udev
+      options: [ bind ]
+    - device: efivarfs
+      fs: efivarfs
+      mountPoint: /sys/firmware/efi/efivars
+      efi: true
+
+# Btrfs subvolumes to create if root filesystem is on btrfs volume.
+# If *mountpoint* is mounted already to another partition, it is ignored.
+# Separate subvolume for swapfile is handled separately and automatically.
+#
+# It is possible to prevent subvolume creation -- this is likely only relevant
+# for the root (/) subvolume -- by giving an empty string as a subvolume
+# name. In this case no subvolume will be created.
+#
+btrfsSubvolumes:
+    - mountPoint: /
+      subvolume: /@
+      # As an alternative:
+      #
+      # subvolume: ""
+    - mountPoint: /home
+      subvolume: /@home
+    - mountPoint: /var/cache
+      subvolume: /@cache
+    - mountPoint: /var/log
+      subvolume: /@log
+
+# The name of the btrfs subvolume holding the swapfile.  This only used when
+# a swapfile is selected and the root filesystem is btrfs
+#
+btrfsSwapSubvol: /@swap
+
+# The mount options used to mount each filesystem.
+#
+# filesystem contains the name of the filesystem or on of three special
+# values, "default", efi" and "btrfs_swap".  The logic is applied in this manner:
+#   - If the partition is the EFI partition, the "efi" entry will be used
+#   - If the fs is btrfs and the subvolume is for the swapfile,
+#     the "btrfs_swap" entry is used
+#   - If the  filesystem is an exact match for filesystem, that entry is used
+#   - If no match is found in the above, the default entry is used
+#   - If there is no match and no default entry, "defaults" is used
+#   - If the mountOptions key is not present, "defaults" is used
+#
+# Each filesystem entry contains 3 keys, all of which are optional
+#   options - An array of mount options that is used on all disk types
+#   ssdOptions - An array of mount options combined with options for ssds
+#   hddOptions - An array of mount options combined with options for hdds
+# If combining these options results in an empty array, "defaults" is used
+#
+# Example 1
+# In this example, there are specific options for ext4 and btrfs filesystems,
+# the EFI partition and the subvolume holding the btrfs swapfile.  All other
+# filesystems use the default entry.  For the btrfs filesystem, there are
+# additional options specific to hdds and ssds
+#
+# mountOptions:
+#    - filesystem: default
+#      options: [ defaults ]
+#    - filesystem: efi
+#      options: [ defaults, umask=0077 ]
+#    - filesystem: ext4
+#      options: [ defaults ]
+#    - filesystem: btrfs
+#      options: [ defaults, compress=zstd:1 ]
+#      ssdOptions: [ discard=async ]
+#      hddOptions: [ autodefrag ]
+#    - filesystem: btrfs_swap
+#      options: [ defaults, noatime ]
+#
+# Example 2
+# In this example there is a single default used by all filesystems
+#
+# mountOptions:
+#    - filesystem: default
+#      options: [ defaults ]
+#
+mountOptions:
+    - filesystem: default
+      options: [ defaults ]
+    - filesystem: efi
+      options: [ defaults, umask=0077 ]
+    - filesystem: btrfs
+      options: [ defaults, compress=zstd:1 ]
+    - filesystem: btrfs_swap
+      options: [ defaults, noatime ]
+
+
+
+

airootfs/usr/share/calamares/modules/netinstall.conf

@@ -0,0 +1,347 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+### Netinstall module
+#
+# The netinstall module allows distribution maintainers to ship minimal ISOs
+# with only a basic set of preinstalled packages. At installation time, the
+# user is presented with the choice to install groups of packages from a
+# predefined list.
+#
+# Calamares will then use the *packages* module to install the packages.
+# Without a *packages* module in the exec phase somewhere **after**
+# this netinstall, nothing will actually get installed. The packages
+# module must be correctly configured **and** the package manager must
+# be runnable from within the installed system at the point where it
+# is invoked, otherwise you'll get nothing.
+#
+# There are two basic deployment schemes:
+#  - static package lists; the packages do not change for this release.
+#    In this case, the package list file may be on the ISO-image itself
+#    as a separate file, **or** included in this configuration file.
+#    Either will do; separate file is easier to update independently
+#    of the Calamares configuration, while merged configurations use
+#    fewer files overall and are closer to self-documenting.
+#  - online package lists; the package list is fetched from a remote
+#    URL and handled otherwise like a static list. This can be useful
+#    if the package list needs updating during the lifetime of an ISO-
+#    image, e.g. packages are added or renamed.
+#
+# There is only one required key for this module, *groupsUrl*.
+#
+# This module supports multiple instances through the *label* key,
+# which allows you to distinguish them in the UI.
+---
+# The *groupsUrl* determines where the data for the netinstall groups-and-
+# packages comes from. The value of the key may be:
+#
+# - a single string (this is treated as a list with just that string in it)
+# - a list of strings
+#
+# Each string is treated as a URL (see below for special cases. The
+# list is examined **in order** and each URL is tried in turn. The
+# first URL to load successfully -- even if it yields 0 packages --
+# ends the process. This allows using a network URL and a (fallback)
+# local URL for package lists, or for using multiple mirrors of
+# netinstall data.
+#
+# The URL must point to a YAML file that follows the format described
+# below at the key *groups* -- except for the special case URL "local".
+# Note that the contents of the groups file is the **important**
+# part of the configuration of this module. It specifies what
+# groups and packages the user may select (and so what commands are to
+# be run to install them).
+#
+# The format of the groups file is the same as the format of the
+# *groups* key described below, **except** that a stand-alone
+# groups file does not have to have the top-level *groups* key.
+# (It **may** have one, though, for instance when you copy
+# this configuration file to `netinstall.yaml` and key *groups*
+# must have a list-of-groups as value; if the file does not have
+# a top-level key *groups*, then the file must contain only a list of groups.
+#
+# Each item in the list *groupsUrl* may be:
+# - A remote URL like `http://example.org/netinstall.php`
+# - A local file URL like `file:///usr/share/calamares/netinstall.yaml`
+# - The special-case literal string `local`
+#
+# Non-special case URLs are loaded as YAML; if the load succeeds, then
+# they are interpreted like the *groups* key below. The special case
+# `local` loads the data directly from **this** file.
+#
+groupsUrl: local
+
+# Alternate form:
+# groupsUrl: [ local ]
+
+# Net-based package list, with fallback to local file
+# groupsUrl:
+#   - http://example.com/calamares/netinstall.yaml
+#   - file:///etc/calamares/modules/netinstall.yaml
+
+
+
+# If the installation can proceed without netinstall (e.g. the Live CD
+# can create a working installed system, but netinstall is preferred
+# to bring it up-to-date or extend functionality) leave this set to
+# false (the default). If set to true, the netinstall data is required.
+#
+# This only has an effect if the netinstall data cannot be retrieved,
+# or is corrupt: having "required" set, means the install cannot proceed.
+# For local or file: type *groupsUrl* settings, this setting is not
+# really meaningful.
+required: false
+
+# To support multiple instances of this module,
+# some strings are configurable and translatable here.
+# Sub-keys under *label* are used for the user interface.
+#  - *sidebar* This is the name of the module in the progress-tree / sidebar
+#   in Calamares.
+#  - *title* This is displayed above the list of packages.
+# If no *sidebar* values are provided, defaults to "Package selection"
+# and existing translations. If no *title* values are provided, no string
+# is displayed.
+#
+# Translations are handled through `[ll]` notation, much like in
+# `.desktop` files. The string associated with `key[ll]` is used for
+# *key* when when the language *ll* (language-code, like *nl* or *en_GB*
+# or *ja*) is used.
+#
+# The following strings are **already** known to Calamares and can be
+# listed here in *untranslated* form (e.g. as value of *sidebar*)
+# without bothering with the translations: they are picked up from
+# the regular translation framework:
+#  - "Package selection"
+#  - "Office software"
+#  - "Office package"
+#  - "Browser software"
+#  - "Browser package"
+#  - "Web browser"
+#  - "Kernel"
+#  - "Services"
+#  - "Login"
+#  - "Desktop"
+#  - "Applications"
+#  - "Communication"
+#  - "Development"
+#  - "Office"
+#  - "Multimedia"
+#  - "Internet"
+#  - "Theming"
+#  - "Gaming"
+#  - "Utilities"
+# Other strings should follow the translations format.
+label:
+    sidebar: "Package selection"
+    # sidebar[nl]: "Pakketkeuze"
+    # sidebar[en_GB]: "Package choice"
+    # sidebar[ja]: "知りません"  # "I don't know"
+    # title: "Office Package"
+    # title[nl]: "Kantoorsoftware"
+
+# If, and only if, *groupsUrl* is set to the literal string `local`,
+# groups data is read from this file. The value of *groups* must be
+# a list. Each item in the list is a group (of packages, or subgroups,
+# or both). A standalone groups file contains just the list,
+# (without the top-level *groups* key, or just the top-level *groups*
+# key and with the list as its value, like in this file).
+#
+# Using `local` is recommended only for small static package lists.
+# Here it is used for documentation purposes.
+#
+#
+### Groups Format
+#
+# Each item in the list describes one group. The following keys are
+# required for each group:
+#
+#  - *name* of the group; short and human-readable. Shown in the first
+#    column of the UI.
+#  - *description* of the group; longer and human-readable. Shown in the
+#    second column of the UI. This is one of the things that visually
+#    distinguishes groups (with descriptions) from packages (without).
+#  - *packages*, a list of packages that belong to this group.
+#    The items of the *packages* list are actual package names
+#    as passed to the package manager (e.g. `qt5-creator-dev`).
+#    This list may be empty (e.g. if your group contains only
+#    subgroups). This key isn't **really** required, either --
+#    one of *subgroups* or *packages* is.
+#
+# The following keys are **optional** for a group:
+#
+#  - *hidden*: if true, do not show the group on the page. Defaults to false.
+#  - *selected*: if true, display the group as selected. Defaults to the
+#    parent group's value, if there is a parent group; top-level groups
+#    are set to true by default.
+#  - *critical*: if true, make the installation process fail if installing
+#    any of the packages in the group fails. Otherwise, just log a warning.
+#    Defaults to false. If not set in a subgroup (see below), inherits from
+#    the parent group.
+#  - *immutable*: if true, the state of the group (and all its subgroups)
+#    cannot be changed; no packages can be selected or deselected. No
+#    checkboxes are show for the group. Setting *immutable* to true
+#    really only makes sense in combination with *selected* set to true,
+#    so that the packages will be installed. (Setting a group to immutable
+#    can be seen as removing it from the user-interface.)
+#  - *noncheckable*: if true, the entire group cannot be selected or
+#    deselected by a single click. This does not affect any subgroups 
+#    or child packages 
+#  - *expanded*: if true, the group is shown in an expanded form (that is,
+#    not-collapsed) in the treeview on start. This only affects the user-
+#    interface. Only top-level groups are show expanded-initially.
+#  - *subgroups*: if present this follows the same structure as the top level
+#    groups, allowing sub-groups of packages to an arbitary depth.
+#  - *pre-install*: an optional command to run within the new system before
+#    the group's packages are installed. It will run before **each** package in
+#    the group is installed.
+#  - *post-install*: an optional command to run within the new system after
+#    the group's packages are installed. It will run after **each** package in
+#    the group is installed.
+#
+# If you set both *hidden* and *selected* for a top-level group, you are
+# creating a "default" group of packages which will always be installed
+# in the user's system. Hidden selected subgroups are installed if their
+# parent is selected. Setting *hidden* to true without *selected*, or with
+# *selected* set to false, is kind of pointless and will generate a warning.
+#
+# The *pre-install* and *post-install* commands are **not** passed to
+# a shell; see the **packages** module configuration (i.e. `packages.conf`)
+# for details. To use a full shell pipeline, call the shell explicitly.
+#
+# Non-critical groups are installed by calling the package manager
+# individually, once for each package (and ignoring errors), while
+# critical packages are installed in one single call to the package
+# manager (and errors cause the installation to terminate).
+#
+#
+#
+# The *groups* key below contains some common patterns for packages
+# and sub-groups, with documentation.
+
+
+groups:
+    # This group is hidden, so the name and description are not really
+    # important. Since it is selected, these packages will be installed.
+    # It's non-critical, so they are installed one-by-one.
+    #
+    # This is a good approach for something you want up-to-date installed
+    # in the target system every time.
+    - name: "Default"
+      description: "Default group"
+      hidden: true
+      selected: true
+      critical: false
+      packages:
+        - base
+        - chakra-live-skel
+    # The Shells group contains only subgroups, no packages itself.
+    # The *critical* value is set for the subgroups that do not
+    # override it; *selected* is set to false but because one of
+    # the subgroups sets *selected* to true, the overall state of
+    # **this** group is partly-selected.
+    #
+    # Each of the sub-groups lists a bunch of packages that can
+    # be individually selected, so a user can pick (for instance)
+    # just one of the ZSH packages if they like.
+    - name: "Shells"
+      description: "Shells"
+      hidden: false
+      selected: false
+      critical: true
+      subgroups:
+        - name: "Bash"
+          description: "Bourne Again Shell"
+          selected: true
+          packages:
+            - bash
+            - bash-completion
+        - name: "Zsh"
+          description: "Zee shell, boss"
+          packages:
+            - zsh
+            - zsh-completion
+            - zsh-extensions
+    # The kernel group has no checkbox, because it is immutable.
+    # It can be (manually) expanded, and the packages inside it
+    # will be shown, also without checkboxes. This is a way to
+    # inform users that something will always be installed,
+    # sort of like a hidden+selected group but visible.
+    - name: "Kernel"
+      description: "Kernel bits"
+      hidden: false
+      selected: true
+      critical: true
+      immutable: true
+      packages:
+        - kernel
+        - kernel-debugsym
+        - kernel-nvidia
+    # *selected* defaults to true for top-level
+    - name: Communications
+      description: "Communications Software"
+      packages:
+        - ruqola
+        - konversation
+        - nheko
+        - quaternion
+    # Setting *selected* is supported. Here we also show off "rich"
+    # packages: ones with a package-name (for the package-manager)
+    # and a description (for the human).
+    - name: Editors
+      description: "Editing"
+      selected: false
+      packages:
+        - vi
+        - emacs
+        - nano
+        - name: kate-git
+          description: Kate (unstable)
+        - name: kate
+          description: KDE's text editor
+    # The "bare" package names can be intimidating, so you can use subgroups
+    # to provide human-readable names while hiding the packages themselves.
+    # This also allows you you group related packages -- suppose you feel
+    # that KDevelop should be installed always with PHP and Python support,
+    # but that support is split into multiple packages.
+    #
+    # So this subgroup (IDE) contains subgroups, one for each "package"
+    # we want to install. Each of those subgroups (Emacs, KDevelop)
+    # in turn contains **one** bogus subgroup, which then has the list
+    # of relevant packages. This extra-level-of-subgrouping allows us
+    # to list packages, while giving human-readable names.
+    #
+    # The name of the internal subgroup doesn't matter -- it is hidden
+    # from the user -- so we can give them all bogus names and
+    # descriptions, even the same name. Here, we use "Bogus". You
+    # can re-use the subgroup name, it doesn't really matter.
+    #
+    # Each internal subgroup is set to *hidden*, so it does not show up
+    # as an entry in the list, and it is set to *selected*,
+    # so that if you select its parent subgroup, the packages from
+    # the subgroup are selected with it and get installed.
+    - name: IDE
+      description: "Development Environment"
+      selected: false
+      subgroups:
+       - name: Emacs
+         description: LISP environment and editor
+         subgroups:
+          - name: Bogus
+            description: Bogus
+            hidden: true
+            selected: true
+            packages:
+             - emacs
+       - name: KDevelop
+         description: KDE's C++, PHP and Python environment
+         subgroups:
+          - name: Bogus
+            description: Bogus
+            hidden: true
+            selected: true
+            packages:
+             - kdevelop
+             - kdevelop-dev
+             - kdev-php
+             - kdev-python
+

airootfs/usr/share/calamares/modules/notesqml.conf

@@ -0,0 +1,43 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# The *notesqml* module can be used to display a QML file
+# as an installer step. This is most useful for release-notes
+# and similar somewhat-static content, but if you want to you
+# can put SameGame in there as well.
+#
+# While the module compiles a QML file into a QRC for inclusion
+# into the shared library, normal use will configure it with
+# an external file, either from Calamares AppData directory or
+# from the branding directory.
+#
+# ---
+#
+# QML modules can search for the QML inside the Qt resources
+# (QRC) which are compiled into the module, or in the branding
+# setup for Calamares, (or both of them, with branding taking
+# precedence). This allows the module to ship a default UI and
+# branding to optionally introduce a replacement file.
+#
+# Generally, leave the search method set to "both" because if
+# you don't want to brand the UI, just don't ship a branding
+# QML file for it.
+#
+# To support instanced QML modules, searches in the branding
+# directory look for the full notesqml@instanceid name as well.
+---
+# Search mode. Valid values are "both", "qrc" and "branding"
+qmlSearch: both
+
+# Name of the QML file. If not set, uses the name of the instance
+# of the module (e.g. if you list this module in `settings.conf`
+# in the *instances* section, you get *id*, otherwise it would
+# normally be "notesqml").
+# qmlFilename: notesqml
+
+# This is the name of the module in the progress-tree / sidebar
+# in Calamares. To support multiple instances of the QML module,
+# the name is configurable and translatable here.
+qmlLabel:
+    notes: "Release Notes"
+    notes[nl]: "Opmerkingen"

airootfs/usr/share/calamares/modules/oemid.conf

@@ -0,0 +1,16 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# This is an OEM setup (phase-0) configuration file.
+---
+# The batch-identifier is written to /var/log/installer/oem-id.
+# This value is put into the text box as the **suggested**
+# OEM ID. If ${DATE} is included in the identifier, then
+# that is replaced by the current date in yyyy-MM-dd (ISO) format.
+#
+# It is ok for the identifier to be empty.
+#
+# The identifier is written to the file as UTF-8 (this will be no
+# different from ASCII, for most inputs) and followed by a newline.
+# If the identifier is empty, only a newline is written.
+batch-identifier: neon-${DATE}

airootfs/usr/share/calamares/modules/openrcdmcryptcfg.conf

@@ -0,0 +1,5 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+---
+configFilePath: /etc/conf.d/dmcrypt

airootfs/usr/share/calamares/modules/packages.conf

@@ -0,0 +1,214 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# The configuration for the package manager starts with the
+# *backend* key, which picks one of the backends to use.
+# In `main.py` there is a base class `PackageManager`.
+# Implementations must subclass that and set a (class-level)
+# property *backend* to the name of the backend (e.g. "dummy").
+# That property is used to match against the *backend* key here.
+#
+# You will have to add such a class for your package manager.
+# It is fairly simple Python code. The API is described in the
+# abstract methods in class `PackageManager`. Mostly, the only
+# trick is to figure out the correct commands to use, and in particular,
+# whether additional switches are required or not. Some package managers
+# have more installer-friendly defaults than others, e.g., DNF requires
+# passing --disablerepo=* -C to allow removing packages without Internet
+# connectivity, and it also returns an error exit code if the package did
+# not exist to begin with.
+---
+#
+# Which package manager to use, options are:
+#  - apk         - Alpine Linux package manager
+#  - apt         - APT frontend for DEB and RPM
+#  - dnf         - DNF, the new RPM frontend
+#  - dnf5        - DNF5, the newer new RPM frontend
+#  - entropy     - Sabayon package manager (is being deprecated)
+#  - luet        - Sabayon package manager (next-gen)
+#  - packagekit  - PackageKit CLI tool
+#  - pacman      - Pacman
+#  - pamac       - Manjaro package manager
+#  - portage     - Gentoo package manager
+#  - yum         - Yum RPM frontend
+#  - zypp        - Zypp RPM frontend
+#
+# Not actually a package manager, but suitable for testing:
+#  - dummy       - Dummy manager, only logs
+#
+backend: dummy
+
+#
+# Often package installation needs an internet connection.
+# Since you may allow system installation without a connection
+# and want to offer OPTIONAL package installation, it's
+# possible to have no internet, yet have this packages module
+# enabled in settings.
+#
+# You can skip the whole module when there is no internet
+# by setting "skip_if_no_internet" to true.
+#
+# You can run a package-manager specific update procedure
+# before installing packages (for instance, to update the
+# list of packages and dependencies); this is done only if there
+# is an internet connection.
+#
+# Set "update_db" to 'true' for refreshing the database on the
+# target system. On target installations, which got installed by
+# unsquashing, a full system update may be needed. Otherwise
+# post-installing additional packages may result in conflicts.
+# Therefore set also "update_system" to 'true'.
+#
+skip_if_no_internet: false
+update_db: true
+update_system: false
+
+# pacman specific options
+#
+# *num_retries* should be a positive integer which specifies the
+# number of times the call to pacman will be retried in the event of a
+# failure.  If it is missing, it will be set to 0.
+#
+# *disable_download_timeout* is a boolean that, when true, includes
+# the flag --disable-download-timeout on calls to pacman.  When missing,
+# false is assumed.
+#
+# *needed_only* is a boolean that includes the pacman argument --needed
+# when set to true.  If missing, false is assumed.
+pacman:
+    num_retries: 0
+    disable_download_timeout: false
+    needed_only: false
+
+#
+# List of maps with package operations such as install or remove.
+# Distro developers can provide a list of packages to remove
+# from the installed system (for instance packages meant only
+# for the live system).
+#
+# A job implementing a distro specific logic to determine other
+# packages that need to be installed or removed can run before
+# this one. Distro developers may want to install locale packages
+# or remove drivers not needed on the installed system.
+# Such a job would populate a list of dictionaries in the global
+# storage called "packageOperations" and that list is processed
+# after the static list in the job configuration (i.e. the list
+# that is in this configuration file).
+#
+# Allowed package operations are:
+#  - *install*, *try_install*: will call the package manager to
+#       install one or more packages. The install target will
+#       abort the whole installation if package-installation
+#       fails, while try_install carries on. Packages may be
+#       listed as (localized) names, or as (localized) package-data.
+#       See below for the description of the format.
+# - *localInstall*: this is used to call the package manager
+#       to install a package from a path-to-a-package. This is
+#       useful if you have a static package archive on the install media.
+#       The *pacman* package manager is the only one to specially support
+#       this operation (all others treat this the same as *install*).
+# - *remove*, *try_remove*: will call the package manager to
+#       remove one or more packages. The remove target will
+#       abort the whole installation if package-removal fails,
+#       while try_remove carries on. Packages may be listed as
+#       (localized) names.
+# One additional key is recognized, to help netinstall out:
+# - *source*: ignored, does get logged
+# Any other key is ignored, and logged as a warning.
+#
+# There are two formats for naming packages: as a name or as package-data,
+# which is an object notation providing package-name, as well as pre- and
+# post-install scripts.
+#
+# Here are both formats, for installing vi. The first one just names the
+# package for vi (using the naming of the installed package manager), while
+# the second contains three data-items; the pre-script is run before invoking
+# the package manager, and the post-script runs once it is done.
+#
+# - install
+#   - vi
+#   - package: vi
+#     pre-script: touch /tmp/installing-vi
+#     post-script: rm -f /tmp/installing-vi
+#
+# The pre- and post-scripts are optional, but you cannot leave both out
+# if you do use the *package* key: using "package: vi" with neither script
+# option will trick Calamares into trying to install a package named
+# "package: vi", which is unlikely to work.
+#
+# The pre- and post-scripts are **not** executed by a shell unless you
+# explicitly invoke `/bin/sh` in them. The command-lines are passed
+# to exec(), which does not understand shell syntax. In other words:
+#
+#     pre-script: ls | wc -l
+#
+# Will fail, because `|` is passed as a command-line argument to ls,
+# as are `wc`, and `-l`. No shell pipeline is set up, and ls is likely
+# to complain. Invoke the shell explicitly:
+#
+#     pre-script: /bin/sh -c \"ls | wc -l\"
+#
+# The above note on shell-expansion applies to versions up-to-and-including
+# Calamares 3.2.12, but will change in future.
+#
+# Any package name may be localized; this is used to install localization
+# packages for software based on the selected system locale. By including
+# the string `LOCALE` in the package name, the following happens:
+#
+# - if the system locale is English (any variety), then the package is not
+#   installed at all,
+# - otherwise `$LOCALE` or `${LOCALE}` is replaced by the 'lower-cased' BCP47
+#   name of the 'language' part of the selected system locale (not the
+#   country/region/dialect part), e.g. selecting "nl_BE" will use "nl"
+#   here.
+#
+# Take care that just plain `LOCALE` will not be replaced, so `foo-LOCALE` will
+# be left unchanged, while `foo-$LOCALE` will be changed. However, `foo-LOCALE`
+# **will** be removed from the list of packages (i.e. not installed), if
+# English is selected. If a non-English locale is selected, then `foo-LOCALE`
+# will be installed, unchanged (no language-name-substitution occurs).
+#
+# The following installs localizations for vi, if they are relevant; if
+# there is no localization, installation continues normally.
+#
+# - install
+#   - vi-$LOCALE
+#   - package: vi-${LOCALE}
+#     pre-script: touch /tmp/installing-vi
+#     post-script: rm -f /tmp/installing-vi
+#
+# When installing packages, Calamares will invoke the package manager
+# with a list of package names if it can; package-data prevents this because
+# of the scripts that need to run. In other words, this:
+#
+# - install:
+#   - vi
+#   - binutils
+#   - package: wget
+#     pre-script: touch /tmp/installing-wget
+#
+# This will invoke the package manager three times, once for each package,
+# because not all of them are simple package names. You can speed up the
+# process if you have only a few pre-scripts, by using multiple install targets:
+#
+# - install:
+#   - vi
+#   - binutils
+# - install:
+#   - package: wget
+#     pre-script: touch /tmp/installing-wget
+#
+# This will call the package manager once with the package-names "vi" and
+# "binutils", and then a second time for "wget". When installing large numbers
+# of packages, this can lead to a considerable time savings.
+#
+operations:
+  - install:
+    - vi
+    - vi-${LOCALE}
+    - wget
+    - binutils
+  - remove:
+    - vi
+    - wget
+    - binutils

airootfs/usr/share/calamares/modules/partition.conf

@@ -0,0 +1,397 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+
+# Options for EFI system partition.
+#
+# - *mountPoint*
+#   This setting specifies the mount point of the EFI system partition. Some
+#   distributions (Fedora, Debian, Manjaro, etc.) use /boot/efi, others (KaOS,
+#   etc.) use just /boot.
+#
+#   Defaults to "/boot/efi", may be empty (but weird effects ensue)
+# - *recommendedSize*
+#   This optional setting specifies the size of the EFI system partition.
+#   If nothing is specified, the default size of 300MiB will be used.
+#   When writing quantities here, M is treated as MiB, and if you really
+#   want one-million (10^6) bytes, use MB.
+# - *minimumSize*
+#   This optional setting specifies the absolute minimum size of the EFI
+#   system partition. If nothing is specified, the *recommendedSize*
+#   is used instead.
+# - *label*
+#   This optional setting specifies the name of the EFI system partition (see
+#   PARTLABEL; gpt only; requires KPMCore >= 4.2.0).
+#   If nothing is specified, the partition name is left unset.
+#
+# Going below the *recommended* size is allowed, but the user will
+# get a warning that it might not work. Going below the *minimum*
+# size is not allowed and the user will be told it will not work.
+#
+# Both quantities must be at least 32MiB, this is enforced by the EFI
+# spec. If minimum is not specified, it defaults to the recommended
+# size. Distros that allow more user latitude can set the minimum lower.
+efi:
+    mountPoint:         "/boot/efi"
+    recommendedSize:    300MiB
+    minimumSize:        32MiB
+    label:              "EFI"
+
+# Deprecated alias of efi.mountPoint
+# efiSystemPartition:     "/boot/efi"
+
+# Deprecated alias of efi.recommendedSize
+# efiSystemPartitionSize:          300MiB
+
+# Deprecated alias of efi.label
+# efiSystemPartitionName:     EFI
+
+# In autogenerated partitioning, allow the user to select a swap size?
+# If there is exactly one choice, no UI is presented, and the user
+# cannot make a choice -- this setting is used. If there is more than
+# one choice, a UI is presented.
+#
+# Legacy settings *neverCreateSwap* and *ensureSuspendToDisk* correspond
+# to values of *userSwapChoices* as follows:
+#    - *neverCreateSwap* is true, means [none]
+#    - *neverCreateSwap* is false, *ensureSuspendToDisk* is false, [small]
+#    - *neverCreateSwap* is false, *ensureSuspendToDisk* is true, [suspend]
+#
+# Autogenerated swap sizes are as follows:
+#    - *suspend*: Swap is always at least total memory size,
+#      and up to 4GiB RAM follows the rule-of-thumb 2 * memory;
+#      from 4GiB to 8 GiB it stays steady at 8GiB, and over 8 GiB memory
+#      swap is the size of main memory.
+#    - *small*: Follows the rules above, but Swap is at
+#      most 8GiB, and no more than 10% of available disk.
+# In both cases, a fudge factor (usually 10% extra) is applied so that there
+# is some space for administrative overhead (e.g. 8 GiB swap will allocate
+# 8.8GiB on disk in the end).
+#
+# If *file* is enabled here, make sure to have the *fstab* module
+# as well (later in the exec phase) so that the swap file is
+# actually created.
+userSwapChoices:
+    - none      # Create no swap, use no swap
+    - small     # Up to 4GB
+    - suspend   # At least main memory size
+    # - reuse     # Re-use existing swap, but don't create any (unsupported right now)
+    - file      # To swap file instead of partition
+
+# This optional setting specifies the name of the swap partition (see
+# PARTLABEL; gpt only; requires KPMCore >= 4.2.0).
+# If nothing is specified, the partition name is left unset.
+# swapPartitionName:      swap
+
+# LEGACY SETTINGS (these will generate a warning)
+# ensureSuspendToDisk:    true
+# neverCreateSwap:        false
+
+# This setting specifies the LUKS generation (i.e LUKS1, LUKS2) used internally by
+# cryptsetup when creating an encrypted partition.
+#
+# This option is set to luks1 by default, as grub doesn't support LUKS2 + Argon2id
+# currently. On the other hand grub does support LUKS2 with PBKDF2 and could therefore be
+# also set to luks2. Also there are some patches for grub and Argon2.
+# See: https://aur.archlinux.org/packages/grub-improved-luks2-git
+#
+# Choices: luks1, luks2 (in addition, "luks" means "luks1")
+#
+# The default is luks1
+#
+luksGeneration: luks1
+
+# This setting determines if encryption should be allowed when using zfs.  This
+# setting has no effect unless zfs support is provided.
+#
+# This setting is to handle the fact that some bootloaders(such as grub) do not
+# support zfs encryption.
+#
+# The default is true
+#
+# allowZfsEncryption: true
+
+# Correctly draw nested (e.g. logical) partitions as such.
+drawNestedPartitions:   false
+
+# Show/hide partition labels on manual partitioning page.
+alwaysShowPartitionLabels: true
+
+# Allow manual partitioning.
+#
+# When set to false, this option hides the "Manual partitioning" button,
+# limiting the user's choice to "Erase", "Replace" or "Alongside".
+# This can be useful when using a custom partition layout we don't want
+# the user to modify.
+#
+# If nothing is specified, manual partitioning is enabled.
+#allowManualPartitioning:   true
+
+# Show not encrypted boot partition warning.
+#
+# When set to false, this option does not show the
+# "Boot partition not encrypted" warning when encrypting the
+# root partition but not /boot partition.
+#
+# If nothing is specified, the warning is shown.
+#showNotEncryptedBootMessage:   true
+
+# Initial selection on the Choice page
+#
+# There are four radio buttons (in principle: erase, replace, alongside, manual),
+# and you can pick which of them, if any, is initially selected. For most
+# installers, "none" is the right choice: it makes the user pick something specific,
+# rather than accidentally being able to click past an important choice (in particular,
+# "erase" is a dangerous choice).
+#
+# The default is "none"
+#
+initialPartitioningChoice: none
+#
+# Similarly, some of the installation choices may offer a choice of swap;
+# the available choices depend on *userSwapChoices*, above, and this
+# setting can be used to pick a specific one.
+#
+# The default is "none" (no swap) if that is one of the enabled options, otherwise
+# one of the items from the options.
+initialSwapChoice: none
+
+# armInstall
+#
+# Leaves 16MB empty at the start of a drive when partitioning
+# where usually the u-boot loader goes
+#
+# armInstall: false
+
+# Default partition table type, used when a "erase" disk is made.
+#
+# When erasing a disk, a new partition table is created on disk.
+# In other cases, e.g. Replace and Alongside, as well as when using
+# manual partitioning, this partition table exists already on disk
+# and it is left unmodified.
+#
+# Possible values: gpt, msdos (or other names defined by KPMcore).
+# Names are case-sensitive.
+#
+# If nothing is specified, Calamares defaults to "gpt" if system is
+# efi or "msdos" otherwise.
+#
+# defaultPartitionTableType: msdos
+
+# Specify whether to create a partition table layout suitable for a hybrid
+# (BIOS + EFI) bootloader installation. This will prepend both bios-boot and
+# EFI system partitions to the partition layout, regardless of whether the
+# booted system uses BIOS or EFI firmware. Defaults to false.
+#
+# createHybridBootloaderLayout: false
+
+# Requirement for partition table type
+#
+# Restrict the installation on disks that match the type of partition
+# tables that are specified.
+#
+# Possible values: msdos, gpt (or other names defined by KPMcore).
+# Names are case-sensitive.
+#
+# If nothing is specified, Calamares defaults to both "msdos" and "gpt".
+#
+# requiredPartitionTableType: gpt
+# requiredPartitionTableType:
+#     - msdos
+#     - gpt
+
+# Default filesystem type, used when a "new" partition is made.
+#
+# When replacing a partition, the new filesystem type will be from the
+# defaultFileSystemType value. In other cases, e.g. Erase and Alongside,
+# as well as when using manual partitioning and creating a new
+# partition, this filesystem type is pre-selected. Note that
+# editing a partition in manual-creation mode will not automatically
+# change the filesystem type to this default value -- it is not
+# creating a new partition.
+#
+# Suggested values: ext2, ext3, ext4, reiser, xfs, jfs, btrfs
+# If nothing is specified, Calamares defaults to "ext4".
+#
+# Names are case-sensitive and defined by KPMCore.
+defaultFileSystemType:  "ext4"
+
+# Selectable filesystem type, used when "erase" is done.
+#
+# When erasing the disk, the *defaultFileSystemType* is used (see
+# above), but it is also possible to give users a choice:
+# list suitable filesystems here. A drop-down is provided
+# to pick which is the filesystems will be used.
+#
+# The value *defaultFileSystemType* is added to this list (with a warning)
+# if not present; the default pick is the *defaultFileSystemType*.
+#
+# If not specified at all, uses *defaultFileSystemType* without a
+# warning (this matches traditional no-choice-available behavior best).
+# availableFileSystemTypes:  ["ext4","f2fs"]
+
+# Per-directory filesystem restrictions.
+#
+# This optional setting specifies what filesystems the user can and cannot use
+# for various directories and mountpoints when using manual partitioning.
+#
+# If nothing is specified, the only restriction enforced by default is that
+# the EFI system partition must use the fat32 filesystem.
+#
+# Otherwise, the filesystem restrictions are defined as follow:
+#
+# directoryFilesystemRestrictions:
+#     - directory: "any"
+#       allowedFilesystemTypes: ["all"]
+#     - directory: "/"
+#       allowedFilesystemTypes: ["ext4","xfs","btrfs","jfs","f2fs"]
+#     - mountpoint: "efi"
+#       allowedFilesystemTypes: ["fat32"]
+#       onlyWhenMountpoint: true
+#
+# There can be any number of mountpoints listed, each entry having the
+# following attributes:
+#   - mountpoint: mountpoint's full path
+#                 or
+#                 "any" to specify a global whitelist that applies to all
+#                 mountpoints
+#                 or
+#                 "efi" to specify a whitelist specific to the EFI system
+#                 partition, wherever that partition is located
+#   - allowedFilesystemTypes: the list of all filesystems valid for this
+#                             mountpoint. If the list contains exactly one
+#                             element, and that element is the special value
+#                             "any", all filesystem types recognized by
+#                             Calamares will be allowed.
+#   - onlyWhenMountpoint: Whether the restriction should apply only when the
+#                         specified directory is a mountpoint. When set to
+#                         true, Calamares will only enforce the listed
+#                         restrictions when the user makes a separate partition
+#                         for this directory and assigns the mountpoint
+#                         accordingly. When set to false, Calamares will
+#                         ensure this directory uses the specified filesystem
+#                         even if the directory is part of a filesystem on a
+#                         different mountpoint. Defaults to false.
+
+# The ClearMounts job unmounts / unmaps things before partitioning.
+# Some special entries under /dev/mapper are excepted from this process.
+# The example lists the three hard-coded exceptions which always apply
+# (they don't need to be listed here). Add other names or wildcards (with
+# a trailing '*') to this list if the live-ISO has additional mounts.
+essentialMounts: [ "live-*", "control", "ventoy" ]
+
+# Show/hide LUKS related functionality in automated partitioning modes.
+# Disable this if you choose not to deploy early unlocking support in GRUB2
+# and/or your distribution's initramfs solution.
+#
+# BIG FAT WARNING:
+#
+# This option is unsupported, as it cuts out a crucial security feature.
+# Disabling LUKS and shipping Calamares without a correctly configured GRUB2
+# and initramfs is considered suboptimal use of the Calamares software. The
+# Calamares team will not provide user support for any potential issue that
+# may arise as a consequence of setting this option to false.
+# It is strongly recommended that system integrators put in the work to support
+# LUKS unlocking support in GRUB2 and initramfs/dracut/mkinitcpio/etc.
+# For more information on setting up GRUB2 for Calamares with LUKS, see
+# the Calamares website at https://calamares.io/docs/partitions/#luks .
+#
+# If nothing is specified, LUKS is enabled in automated modes.
+#enableLuksAutomatedPartitioning:    true
+
+# When enableLuksAutomatedPartitioning is true, this option will pre-check
+# encryption checkbox. This option is only usefull to help people to not forget
+# to cypher their disk when installing in enterprise (for example).
+#preCheckEncryption:    false
+
+# LVM support
+#
+# There is only one sub-key available, *enable* (defaults to true)
+# which can be used to show (default) or hide the LVM buttons in the partitioning module.
+lvm:
+    enable: true
+
+# Partition layout.
+#
+# This optional setting specifies a custom partition layout.
+#
+# If nothing is specified, the default partition layout is a single partition
+# for root that uses 100% of the space and uses the filesystem defined by
+# defaultFileSystemType.
+#
+# Note: the EFI system partition is prepended automatically to the layout if
+# needed; the swap partition is appended to the layout if enabled (selections
+# "small" or "suspend" in *userSwapChoices*).
+#
+# Otherwise, the partition layout is defined as follow:
+#
+# partitionLayout:
+#     - name: "rootfs"
+#       type: "4f68bce3-e8cd-4db1-96e7-fbcaf984b709"
+#       filesystem: "ext4"
+#       noEncrypt: false
+#       mountPoint: "/"
+#       size: 20%
+#       minSize: 500M
+#       maxSize: 10G
+#       attributes: 0xffff000000000003
+#     - name: "home"
+#       type: "933ac7e1-2eb4-4f13-b844-0e14e2aef915"
+#       filesystem: "ext4"
+#       noEncrypt: false
+#       mountPoint: "/home"
+#       size: 3G
+#       minSize: 1.5G
+#       features:
+#         64bit: false
+#         casefold: true
+#     - name: "data"
+#       filesystem: "fat32"
+#       mountPoint: "/data"
+#       features:
+#         sector-size: 4096
+#         sectors-per-cluster: 128
+#       size: 100%
+#
+# There can be any number of partitions, each entry having the following attributes:
+#   - name: filesystem label
+#           and
+#           partition name (gpt only; since KPMCore 4.2.0)
+#   - uuid: partition uuid (optional parameter; gpt only; requires KPMCore >= 4.2.0)
+#   - type: partition type (optional parameter; gpt only; requires KPMCore >= 4.2.0)
+#   - attributes: partition attributes (optional parameter; gpt only; requires KPMCore >= 4.2.0)
+#   - filesystem: filesystem type (optional parameter)
+#       - if not set at all, treat as "unformatted"
+#       - if "unformatted", no filesystem will be created
+#       - if "unknown" (or an unknown FS name, like "elephant") then the
+#         default filesystem type, or the user's choice, will be applied instead
+#         of "unknown" (e.g. the user might pick ext4, or xfs).
+#   - noEncrypt: whether this partition is exempt from encryption if enabled (optional parameter; default is false)
+#   - mountPoint: partition mount point (optional parameter; not mounted if unset)
+#   - size: partition size in bytes (append 'K', 'M' or 'G' for KiB, MiB or GiB)
+#           or
+#           % of the available drive space if a '%' is appended to the value
+#   - minSize: minimum partition size (optional parameter)
+#   - maxSize: maximum partition size (optional parameter)
+#   - features: filesystem features (optional parameter; requires KPMCore >= 4.2.0)
+#       name: boolean or integer or string
+
+# Checking for available storage
+#
+# This overlaps with the setting of the same name in the welcome module's
+# requirements section. If nothing is set by the welcome module, this
+# value is used instead. It is still a problem if there is no required
+# size set at all, and the replace and resize options will not be offered
+# if no required size is set.
+#
+# The value is in Gibibytes (GiB).
+#
+# BIG FAT WARNING: except for OEM-phase-0 use, you should be using
+#                  the welcome module, **and** configure this value in
+#                  `welcome.conf`, not here.
+# requiredStorage: 3.5
+# Use GPT for UEFI (standard for modern VMs)
+defaultPartitionTableType: "gpt"
+
+# Ensure the installer doesn't hang on "busy" disks
+enableLuksAutomatedPartitioning: true

airootfs/usr/share/calamares/modules/plasmalnf.conf

@@ -0,0 +1,83 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# The Plasma Look-and-Feel module allows selecting a Plasma
+# Look-and-Feel in the live- or host-system and switches the
+# host Plasma session immediately to the chosen LnF; it
+# can also write a LnF configuration to the target user / on
+# the target system.
+#
+# This module should be used once in a view section (to get
+# the UI) and once in the exec section (to apply the selection
+# to the target user). It should come **after** the user module
+# in exec, so that the target user has been created alrady.
+---
+# Full path to the Plasma look-and-feel tool (CLI program
+# for querying and applying Plasma themes). If this is not
+# set, no LNF setting will happen.
+lnftool:	"/usr/bin/lookandfeeltool"
+
+# For systems where the user Calamares runs as (usually root,
+# via either sudo or pkexec) has a clean environment, set this
+# to the originating username; the lnftool will be run through
+# "sudo -H -u <liveuser>" instead of directly.
+#
+# liveuser:	"live"
+
+# If *showAll* is true, then all installed themes are shown in the
+# UI for selection, even if they are not listed in *themes* (below).
+# This allows selection of all themes even while not all of them are
+# listed in *themes* -- which is useful to show screenshots for those
+# you do have a screenshot for. If *themes* is empty or missing,
+# the value of *showAll* is treated as `true`.
+showAll: false
+
+# You can limit the list of Plasma look-and-feel themes by listing ids
+# here. If this key is not present, all of the installed themes are listed.
+# If the key is present, only installed themes that are **also** included
+# in the list are shown (could be none!). See the *showAll* key, above,
+# to change that.
+#
+# Themes may be listed by id, (e.g. fluffy-bunny, below) or as a theme
+# and an image (e.g. breeze) which will be used to show a screenshot.
+# Themes with no image set at all get a "missing screenshot" image; if the
+# image file is not found, they get a color swatch based on the image name.
+#
+# The image may be an absolute path. If it is a relative path, though,
+# it is searched in the current directory and in the branding directory
+# (i.e. relative to the directory where your branding.desc lives).
+#
+# Valid forms of entries in the *themes* key:
+#  - A single string (unquoted), which is the theme id
+#  - A pair of *theme* and *image* keys, e.g.
+#    ```
+#    - theme: fluffy-bunny.desktop
+#      image: "fluffy-screenshot.png"
+#    ```
+#
+# The image screenshot is resized to 12x8 the current font size, with
+# a minimum of 120x80 pixels. This allows the screenshot to scale up
+# on HiDPI displays where the fonts are larger (in pixels).
+themes:
+    - org.kde.fuzzy-pig.desktop
+    - theme: org.kde.breeze.desktop
+      image: "breeze.png"
+    - theme: org.kde.breezedark.desktop
+      image: "breeze-dark.png"
+    - org.kde.fluffy-bunny.desktop
+
+# You can pre-select one of the themes; it is not applied
+# immediately, but its radio-button is switched on to indicate
+# that that is the theme (that is most likely) currently in use.
+# Do this only on Live images where you are reasonably sure
+# that the user is not going to change the theme out from under
+# themselves before running the installer.
+#
+# If this key is present, its value should be the id of the theme
+# which should be pre-selected. If absent, empty, or the pre-selected
+# theme is not found on the live system, no theme will be pre-selected.
+#
+# As a special setting, use "*", to try to find the currently-
+# selected theme by reading the Plasma configuration. This requires
+# KF5::Config at build- and run-time.
+preselect: "*"

airootfs/usr/share/calamares/modules/plymouthcfg.conf

@@ -0,0 +1,31 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Plymouth Configuration Module
+#
+# This module can be used to setup the default plymouth theme to 
+# be used with your distribution
+#
+# You should only use this module if the plymouth package is installed 
+# on the build configurations of your distribution & the plymouth 
+# theme you want to configure is installed as well. If the unpacked
+# filesystem configures a plymouth theme already, there is no need
+# to change it here.
+---
+
+
+# Leave this commented if you want to use the default theme 
+# shipped with your distribution configurations. Make sure that 
+# the theme exists in the themes directory of plymouth path. 
+# Debian / Ubuntu comes with themes "joy", "script", "softwaves",
+# possibly others. Look in /usr/share/plymouth/themes for more.
+#
+# Specifying a non-existent theme will leave the plymouth
+# configuration set to that theme. It is up to plymouth to
+# deal with that.
+
+plymouth_theme: spinfinity
+
+
+
+

airootfs/usr/share/calamares/modules/preservefiles.conf

@@ -0,0 +1,70 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Configuration for the preserve-files job
+#
+# The *files* key contains a list of files to preserve. Each element of
+# the list should have one of these forms:
+#
+# - an absolute path (probably within the host system). This will be preserved
+#   as the same path within the target system (chroot). If, globally,
+#   *dontChroot* is true, then these items will be ignored (since the
+#   destination is the same as the source).
+# - a map with a *dest* key. The *dest* value is a path interpreted in the
+#   target system (if the global *dontChroot* is true, then the host is the
+#   target as well). Relative paths are not recommended. There are two
+#   ways to select the source data for the file:
+#   - *from*, which must have one of the values, below; it is used to
+#     preserve files whose pathname is known to Calamares internally.
+#   - *src*, to refer to a path interpreted in the host system. Relative
+#     paths are not recommended, and are interpreted relative to where
+#     Calamares is being run.
+#   Exactly one of the two source keys (either *from* or *src*) must be set.
+#
+#   Special values for the key *from* are:
+#     - *log*, for the complete log file (up to the moment the preservefiles
+#       module is run),
+#     - *config*, for a JSON dump of the contents of global storage.
+#       Note that this may contain sensitive information, and should be
+#       given restrictive permissions.
+#
+#  A map with a *dest* key can have these additional fields:
+#   - *perm*, is a colon-separated tuple of <user>:<group>:<mode>
+#     where <mode> is in octal (e.g. 4777 for wide-open, 0400 for read-only
+#     by owner). If set, the file's ownership and permissions are set to
+#     those values within the target system; if not set, no permissions
+#     are changed.
+#   - *optional*, is a boolean; if this is set to `true` then failure to
+#     preserve the file will **not** be counted as a failure of the
+#     module, and installation will proceed. Set this for files that might
+#     not exist in the host system (e.g. nvidia configuration files that
+#     are created in some boot scenarios and not in others).
+#
+# The target path (*dest*) is modified by expanding variables in `${}`:
+#   - `ROOT` is replaced by the path to the target root (may be /).
+#     There is never any reason to use this, since the *dest* is already
+#     interpreted in the target system.
+#   - `USER` is replaced by the username entered by on the user
+#       page (may be empty, for instance if no user page is enabled)
+#
+#
+#
+files:
+  - from: log
+    dest: /var/log/Calamares.log
+    perm: root:wheel:600
+  - from: log
+    dest: /home/${USER}/installation.log
+    optional: true
+  - from: config
+    dest: /var/log/Calamares-install.json
+    perm: root:wheel:600
+# - src: /var/log/nvidia.conf
+#   dest: /var/log/Calamares-nvidia.conf
+#   optional: true
+
+# The *perm* key contains a default value to apply to all files listed
+# above that do not have a *perm* key of their own. If not set,
+# root:root:0400 (highly restrictive) is used.
+#
+# perm: "root:root:0400"

airootfs/usr/share/calamares/modules/rawfs.conf

@@ -0,0 +1,32 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Configuration for the rawfs module: raw filesystem copy to a block device
+
+---
+
+# To apply a custom partition layout, it has to be defined as a list of targets.
+#
+# For each target, the following attributes must be defined:
+#       * mountPoint: The mount point of the destination device on the installed system
+#         The corresponding block device will automatically be identified and used as the
+#         destination for the operation
+#       * source: The source filesystem; it can be the mount point of a locally (on the
+#         live system) mounted filesystem, a path to a disk image, or a block device
+#       * resize (optional): Expand the destination filesystem to fill the whole
+#         partition at the end of the operation; this works only with ext filesystems
+#         for now
+
+targets:
+    - mountPoint: /
+      source: /
+    - mountPoint: /home
+      source: /images/home.img
+      resize: true
+    - mountPoint: /data
+      source: /dev/mmcblk0p3
+
+# To support testing, set the *bogus* key to true. No actual work is done, but the
+# module's logic is exercised.
+
+# bogus: false

airootfs/usr/share/calamares/modules/removeuser.conf

@@ -0,0 +1,13 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Removes a single user (with userdel) from the system.
+# This is typically used in OEM setups or if the live user
+# spills into the target system.
+#
+# The module never fails; if userdel fails, this is logged
+# but the module still reports success and installation / setup
+# continues as normal.
+---
+# Username in the target system to be removed.
+username: live

airootfs/usr/share/calamares/modules/services-systemd.conf

@@ -0,0 +1,54 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Systemd units manipulation.
+#
+# This module can perform actions using systemd units, 
+# (for example, enabling, disabling, or masking services, sockets, paths, etc.)
+---
+
+# There is one key for this module: *units*. Its value is a list of entries.
+# Each entry has three keys:
+#   - *name* is the (string) name of the systemd unit that is being changed.
+#     Use quotes. You can use any valid systemd unit here (for example, 
+#     "NetworkManager.service", "cups.socket", "lightdm", "gdm", etc.)
+#   - *action* is the (string) action that you want to perform over the unit
+#     (for example, "enable", "disable", "mask", "unmask", etc.). Please 
+#     ensure that the action can actually run under chroot (otherwise it is
+#     pointless)      
+#   - *mandatory* is a boolean option, which states whether the change
+#     must be done successfully. If systemd reports an error while changing
+#     a mandatory entry, the installation will fail. When mandatory is false,
+#     errors for that systemd unit are ignored. If mandatory
+#     is not specified, the default is false.
+#
+# The order of operations is the same as the order in which entries
+# appear in the list
+
+# # This example enables NetworkManager.service (and fails if it can't),
+# # disables cups.socket (and ignores failure). Then it enables the
+# # graphical target (e.g. so that SDDM runs for login), and
+# # finally masks pacman-init (an ArchLinux-only service).
+# #
+# units:
+#   - name: "NetworkManager.service"
+#     action: "enable" 
+#     mandatory: true
+#
+#   - name: "cups.socket"
+#     action: "disable" 
+#     # The property "mandatory" is taken to be false by default here
+#     # because it is not specified
+#
+#   - name: "graphical.target"
+#     action: "enable" 
+#     # The property "mandatory" is taken to be false by default here
+#     # because it is not specified
+#
+#   - name: "pacman-init.service"
+#     action: "mask"
+#     # The property "mandatory" is taken to be false by default here
+#     # because it is not specified
+
+# By default, no changes are made.
+units: []

airootfs/usr/share/calamares/modules/shellprocess.conf

@@ -0,0 +1,146 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Configuration for the shell process job.
+#
+# Executes a list of commands found under the key *script*.
+# If the top-level key *dontChroot* is true, then the commands
+# are executed in the context of the live system, otherwise
+# in the context of the target system. In all of the commands,
+# the following variable expansions will take place:
+#  - `ROOT` is replaced by the root mount point of the **target**
+#    system from the point of view of the command (when run in the target
+#    system, e.g. when *dontChroot* is false, that will be `/`).
+#  - `USER` is replaced by the username, set on the user page.
+#  - `LANG` is replaced by the language chosen for the user-interface
+#    of Calamares, set on the welcome page. This may not reflect the
+#    chosen system language from the locale page.
+#
+# As a special case, variables of the form `gs[key]` where `key` is
+# a dotted-keys string and `gs` is literally the letters `g` and `s`,
+# use **any** value from Global Storage. For example,
+#
+#    gs[branding.bootloader]
+#
+# This variable refers to the GS value stored in `bootloader` in the
+# `branding` map. Examine the Debug window for information about the
+# keys stored in GS. Only strings and integers are exposed this way,
+# lists and other data types do not set any variable this way.
+#
+# Variables are written as `${var}`, e.g. `${ROOT}`.
+# Write `$$` to get a shell-escaped `\$` in the shell command.
+# It is not possible to get an un-escaped `$` in the shell command
+# (either the command will fail because of undefined variables, or
+# you get a shell-escaped `\$`).
+#
+# The (global) timeout for the command list can be set with
+# the *timeout* key. The value is a time in seconds, default
+# is 30 seconds if not set. The timeout **must** be tuned, either
+# globally or per-command (see below in the description of *script*),
+# to the load or expected running-time of the command.
+#
+#  - Setting a timeout of 30 for a `touch` command is probably exessive
+#  - Setting a timeout of 1 for a `touch` command might be low,
+#    on a slow disk where touch needs to be loaded from CDROM
+#  - Setting a timeout of 30 for a 1GB download is definitely low
+#  - Setting a timeout of 3600 for a 1GB download is going to leave
+#    the user in uncertainty for a loooong time.
+#
+# The (global) verbosity of a command can be set to `true` or `false`.
+# When set to `true`, command output is logged one line at a time.
+# Otherwise the output is logged when the command completes.
+# Line-at-a-time logging is appropriate for commands that take
+# a long time to complete and produce their own (progress) output.
+#
+# If a command starts with "-" (a single minus sign), then the
+# return value of the command following the - is ignored; otherwise,
+# a failing command will abort the installation. This is much like
+# make's use of - in a command.
+#
+# The value of *script* may be:
+#   - a single string; this is one command that is executed.
+#   - a single object (see below).
+#   - a list of items; these are executed one at a time, by
+#     separate shells (/bin/sh -c is invoked for each command).
+#     Each list item may be:
+#     - a single string; this is one command that is executed.
+#     - a single object, specifying a key *command* and (optionally)
+#       a key *timeout* to set the timeout for this specific
+#       command differently from the global setting. An optional
+#       key *environment* is a list of strings to put into the
+#       environment of the command. An optional key *verbose*
+#       overrides the global *verbose* setting in this file.
+#
+# Using a single object is not generally useful because the same effect
+# can be obtained with a single string and a global timeout, except
+# when the command needs environment-settings. When there are
+# multiple commands to execute, one of them might have
+# a different timeout than the others.
+#
+# The environment strings should all be "KEY='some value'" strings,
+# as if they can be typed into the shell. Quoting the environment
+# strings with "" in YAML is recommended. Adding the '' quotes ensures
+# that the value will not be interpreted by the shell. Writing
+# environment strings is the same as placing `export KEY='some value' ;`
+# in front of the *command*.
+#
+# Calamares variable expansion is **also** done on the environment strings.
+# Write `$$` to get a literal `$` in the shell command.
+#
+# To change the description of the job, set the *name* entries in *i18n*.
+---
+# Set to true to run in host, rather than target system
+dontChroot: false
+
+# Tune this for the commands you're actually running, or
+# use the list-of-items form of commands to tune the timeout
+# for each command individually.
+timeout: 10
+
+# This will copy the output from the command into the Calamares
+# log file. No processing is done beyond log-each-line-separately,
+# so this can introduce weirdness in the log if the script
+# outputs e.g. escape codes.
+#
+# The default is `false`. This can also be set for each
+# command individually.
+verbose: false
+
+# Script may be a single string (because false returns an error exit
+# code, this will trigger a failure in the installation):
+#
+# script: "/usr/bin/false"
+
+# Script may be a list of strings (because false returns an error exit
+# code, **but** the command starts with a "-", the error exit is
+# ignored and installation continues):
+#
+# script:
+#     - "-/usr/bin/false"
+#     - "/bin/ls"
+#     - "/usr/bin/true"
+
+# Script may be a list of items
+# - if the touch command fails, it is ignored
+# - there is nothing special about the invocation of true
+# - the slowloris command has a different timeout from the other commands
+# - the echo command logs its output line-by-line
+script:
+    - "-touch ${ROOT}/tmp/thingy"
+    - "/usr/bin/true"
+    - command: "/usr/local/bin/slowloris"
+      timeout: 3600
+    - command: "echo -e '\e[33;2mred\e[33;0m' ; echo second line"
+      verbose: true
+
+# You can change the description of the job (as it is displayed in the
+# progress bar during installation) by defining an *i18n* key, which
+# has a *name* field and optionally, translations as *name[lang]*.
+#
+# Without a translation here, the default name from the source code
+# is used, "Shell Processes Job".
+#
+# i18n:
+#     name: "Shell process"
+#     name[nl]: "Schelpenpad"
+#     name[en_GB]: "Just a moment"

airootfs/usr/share/calamares/modules/tracking.conf

@@ -0,0 +1,105 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Settings for various kinds of tracking that Distributions can
+# enable. Distributions looking at tracking should be aware of
+# the privacy (and hence communications) impact of that tracking,
+# and are advised to consult the Mozilla and KDE policies on
+# privacy and user tracking.
+#
+# There are three areas of tracking (-configuration) supported
+# by Calamares It is up to individual Distributions to create
+# suitable backends / configuration scripts for each. The
+# different areas are:
+#
+# install:  This is "phone home" functionality at the end of the
+#           install process. When enabled, it contacts the given
+#           URL. The URL can contain the special token $MACHINE,
+#           which is replaced by the machine-id of the installed
+#           system (if available, blank otherwise).
+#
+# machine:  This enables machine-level tracking on a (semi-)
+#           continuous basis. It is meant to keep track of installed
+#           systems and their continued use / updating.
+#
+# user:     This area enables user-level tracking, along the lines
+#           of the KDE User Telemetry Policy. It enables specific
+#           collection of data at a user- and application-level,
+#           possibly including actions done in an application.
+#           For the KDE environment, this enables user tracking
+#           with the appropriate framework, and the KDE User Telemetry
+#           policy applies.
+#
+# Each area has a key *enabled*. If the area is enabled, it is shown to
+# the user. This defaults to false, which means no tracking would be
+# configured or enabled by Calamares.
+#
+# Each area has a key *policy*, which is a Url to be opened when
+# the user clicks on the corresponding Help button for an explanation
+# of the details of that particular kind of tracking. If no policy
+# is set, that tracking style is disabled. The example policy links
+# go to Calamares' generic user manual (which is a terrible idea
+# for a distribution: you have GDPR obligations under most of these
+# tracking styles, so do your homework).
+#
+# Each area may have other configuration keys, depending on the
+# area and how it needs to be configured.
+#
+# Globally, there are two other keys:
+#
+# policy:   (optional) url about tracking settings for this distro.
+# default:  (optional) level to enable by default
+#
+---
+# This is the global policy; it is displayed as a link on the page.
+# If blank or commented out, no link is displayed on the tracking
+# page. You **must** provide policy links per-area as well.
+policy:  "https://calamares.io/docs/tracking#policy"
+
+# This is the default area to enable for tracking. If commented out,
+# empty, or otherwise invalid, "none" is used, so no tracking by default.
+# Setting an area here also checks the areas before it (install, machine,
+# then user) by default -- subject to those areas being enabled at all.
+# default:    user
+
+# The install area has one specific configuration key:
+#   url:    this URL (remember to include the protocol, and prefer https)
+#           is fetched (with a GET request, and the data discarded) at
+#           the end of the installation process. The following tokens
+#           are replaced in the url (possibly by blank strings, or by 0).
+#               - $CPU (cpu make and model)
+#               - $MEMORY (amount of main memory available)
+#               - $DISK (total amount of disk attached)
+#           Typically these are used as GET parameters, as in the example.
+#
+# Note that phone-home only works if the system has an internet
+# connection; it is a good idea to require internet in the welcome
+# module then.
+install:
+    enabled: false
+    policy:  "https://calamares.io/docs/tracking#policy"
+    url:     "https://example.com/install.php?c=$CPU&m=$MEMORY"
+
+# The machine area has one specific configuration key:
+#   style:  This string specifies what kind of tracking configuration
+#           needs to be done. See below for valid styles.
+#
+# Available styles:
+#   - *updatemanager* replaces the literal string "${MACHINE_ID}" with the contents of
+#     /etc/machine-id, in lines starting with "URI" in the file /etc/update-manager/meta-release
+machine:
+    enabled: false
+    style: updatemanager
+    policy:  "https://calamares.io/docs/tracking#policy"
+
+# The user area has one specific configuration key:
+#   style:  This string specifies what kind of tracking configuration
+#           needs to be done. See below for valid styles.
+#
+# Available styles:
+#   - *kuserfeedback* sets up KUserFeedback tracking (applicable to the KDE
+#       Plasma Desktop) for each KUserFeedback area listed in *areas*.
+user:
+    enabled: false
+    style: kuserfeedback
+    areas: [ PlasmaUserFeedback ]

airootfs/usr/share/calamares/modules/umount.conf

@@ -0,0 +1,14 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+### Umount Module
+#
+# This module represents the last part of the installation, the unmounting
+# of partitions used for the install.  After this, there is no regular way
+# to modify the target system anymore.
+#
+
+---
+# Setting emergency to true will make it so this module is still run
+# when a prior module fails
+emergency: true

airootfs/usr/share/calamares/modules/unpackfs.conf

@@ -0,0 +1,123 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Unsquash / unpack a filesystem. Multiple sources are supported, and
+# they may be squashed or plain filesystems.
+#
+# Configuration:
+#
+#   from globalstorage: rootMountPoint
+#   from job.configuration: the path to where to mount the source image(s)
+#       for copying an ordered list of unpack mappings for image file <->
+#       target dir relative to rootMountPoint.
+
+---
+# Each list item is unpacked, in order, to the target system.
+#
+# Each list item has the following **mandatory** attributes:
+#   - *source* path relative to the live / intstalling system to the image
+#   - *sourcefs* the type of the source files; valid entries are
+#       - `ext4` (copies the filesystem contents)
+#       - `squashfs` (unsquashes)
+#       - `file` (copies a file or directory)
+#       - (may be others if mount supports it)
+#   - *destination* path relative to rootMountPoint (so in the target
+#       system) where this filesystem is unpacked. It may be an
+#       empty string, which effectively is / (the root) of the target
+#       system.
+#
+# Each list item **optionally** can include the following attributes:
+#   - *exclude* is a list of values that is expanded into --exclude
+#       arguments for rsync (each entry in exclude gets its own --exclude).
+#   - *excludeFile* is a single file that is passed to rsync as an
+#       --exclude-file argument. This should be a full pathname
+#       inside the **host** filesystem.
+#   - *weight* is useful when the entries take wildly different
+#       times to unpack (e.g. with a squashfs, and one single file)
+#       and the total weight of this module should be distributed
+#       differently between the entries. (This is only relevant when
+#       there is more than one entry; by default all the entries
+#       have the same weight, 1)
+#
+# EXAMPLES
+#
+# Usually you list a filesystem image to unpack; you can use
+# squashfs or an ext4 image. An empty destination is equivalent to "/",
+# the root of the target system. The destination directory must exist
+# in the target system.
+#
+#   -   source: "/path/to/filesystem.sqfs"
+#       sourcefs: "squashfs"
+#       destination: ""
+#
+# Multiple entries are unpacked in-order; if there is more than one
+# item then only the first must exist beforehand -- it's ok to
+# create directories with one unsquash and then to use those
+# directories as a target from a second unsquash.
+#
+#   -   source: "/path/to/another/filesystem.img"
+#       sourcefs: "ext4"
+#       destination: ""
+#   -   source: "/path/to/another/filesystem2.img"
+#       sourcefs: "ext4"
+#       destination: "/usr/lib/extra"
+#
+# You can list filesystem source paths relative to the Calamares run
+# directory, if you use -d (this is only useful for testing, though).
+#
+#    -   source: ./example.sqfs
+#        sourcefs: squashfs
+#        destination: ""
+#
+# You can list individual files (copied one-by-one), or directories
+# (the files inside this directory are copied directly to the destination,
+# so no "dummycpp/" subdirectory is created in this example).
+# Do note that the target directory must exist already (e.g. from
+# extracting some other filesystem).
+#
+#    -   source: ../CHANGES
+#        sourcefs: file
+#        destination: "/tmp/derp"
+#    -   source: ../src/modules/dummycpp
+#        sourcefs: file
+#        destination: "/tmp/derp"
+#
+# The *destination* and *source* are handed off to rsync, so the semantics
+# of trailing slashes apply. In order to *rename* a file as it is
+# copied, specify one single file (e.g. CHANGES) and a full pathname
+# for its destination name, as in the example below.
+#
+# It is also possible to dynamically (conditionally) unpack a source by passing a boolean
+# value for *condition*. This may be true or false (constant) or name a globalstorage
+# value. Use '.' to separate parts of a globalstorage name if it is nested.
+#
+# This is used in e.g. stacked squashfses, where the user can select a specific
+# install type. The default value of *condition* is true.
+#
+#    -   source: ./example.minimal.sqfs
+#        sourcefs: squashfs
+#        destination: ""
+#        condition: false
+#    -   source: ./example.standard.sqfs
+#        sourcefs: squashfs
+#        destination: ""
+#        condition: exampleGlobalStorageVariable.subkey
+#
+# You may also wish to include optional squashfses, which may not exist at certain times
+# depending on your image tooling. If an optional squashfs is not found, it is simply
+# skipped.
+#
+#    -   source: ./example.standard.sqfs
+#        sourcefs: squashfs
+#        destination: ""
+#    -   source: ./example.extras.sqfs
+#        sourcefs: squashfs
+#        destination: ""
+#        optional: true
+unpack:
+    -   source: "/run/archiso/bootmnt/arch/x86_64/airootfs.sfs"
+        sourcefs: "squashfs"
+        destination: ""
+    -   source: "/run/archiso/bootmnt/arch/boot/x86_64/vmlinuz-linux"
+        sourcefs: "file"
+        destination: "/boot/vmlinuz-linux"

airootfs/usr/share/calamares/modules/unpackfsc.conf

@@ -0,0 +1,74 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Unpack a filesystem. Supported ways to "pack" the filesystem are:
+#   - erofs
+#     Enhanced Read-Only File System is a relatively new filesystem, introduced
+#     in 2019 with Linux 5.4, which is optimised for runtime performance. EROFS
+#     has compression options similar to that of SquashFS, however, in
+#     direct head to head comparison, as of 2025, the EROFS compression
+#     algorithms are not as performant; it takes longer to pack a filesystem and
+#     the compression size is not quite as good. EROFS is under active
+#     development.
+#     .
+#     Wikipedia: https://en.wikipedia.org/wiki/EROFS
+#     Upstream documentation: https://erofs.docs.kernel.org/en/latest/
+#     .
+#     erofs-utils contains mkfs.erofs, fsck.erofs and dump.erofs utilities
+#     which are required to pack, inspect and extract erofs files.
+#   - fsarchiver in *savedir/restdir* mode (directories, not block devices)
+#   - squashfs
+#     SquashFS is a compressed read-only file system for Linux that was
+#     introduced in 2002. It supports deduplication and has mature and
+#     performant compression algorithms.
+#     .
+#     Wikipedia: https://en.wikipedia.org/wiki/SquashFS
+#     Upstream documentation: https://github.com/plougher/squashfs-tools
+#     .
+#     squashfs-tools contains mksquashfs and unsquashfs utilities which are
+#     required to pack and extract squashfs files.
+#
+# Configuration:
+#
+#   from globalstorage: rootMountPoint
+#   from job configuration: the item to unpack
+#
+
+---
+# This module is configured a lot like the items in the *unpackfs*
+# module, but with only **one** item. Use multiple instances for
+# unpacking more than one filesystem.
+#
+# There are the following **mandatory** keys:
+#   - *source* path relative to the live / intstalling system to the image
+#   - *sourcefs* the type of the source files; valid entries are
+#       - `none` (this entry is ignored; kind of useless)
+#       - `erofs`
+#       - `fsarchiver`
+#         Aliases of this are `fsarchive`, `fsa` and `fsa-dir`. Uses
+#         fsarchiver in "restdir" mode.
+#       - `fsarchiver-block`
+#         Aliases of this are `fsa-block` and `fsa-fs`. Uses fsarchiver
+#         in "restfs" mode.
+#       - `squashfs`
+#         Aliases of this are `squash` and `unsquash`.
+#       - `tar`
+#   - *destination* path relative to rootMountPoint (so in the target
+#       system) where this filesystem is unpacked. It may be an
+#       empty string, which effectively is / (the root) of the target
+#       system.
+#
+#
+# There are the following **optional** keys:
+#   - *condition* sets a dynamic condition on unpacking the item in
+#     this job. This may be true or false (constant) or name a globalstorage
+#     value. Use '.' to separate parts of a globalstorage name if it is nested.
+#     Remember to quote names.
+#
+#     A condition is used in e.g. stacked squashfses, where the user can select
+#     a specific install type. The default value of *condition* is true.
+
+source: /data/rootfs.fsa
+sourcefs: fsarchiver
+destination: "/"
+# condition: true

airootfs/usr/share/calamares/modules/users.conf

@@ -0,0 +1,312 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Configuration for the one-user-system user module.
+#
+# Besides these settings, the users module also places the following
+# keys into the Global Storage area, based on user input in the view step.
+#
+# - hostname
+# - username
+# - password (obscured)
+# - autologinUser (if enabled, set to username)
+#
+# These Global Storage keys are set when the configuration for this module
+# is read and when they are modified in the UI.
+---
+### GROUPS CONFIGURATION
+#
+# The system has groups of uses. Some special groups must be
+# created during installation. Optionally, there are special
+# groups for users who can use sudo and for supporting autologin.
+
+# Used as default groups for the created user.
+# Adjust to your Distribution defaults.
+#
+# Each entry in the *defaultGroups* list is either:
+#   - a string, naming a group; this is a **non**-system group
+#     which does not need to exist in the target system; if it
+#     does not exist, it will be created.
+#   - an entry with subkeys *name*, *must_exist* and *system*;
+#     if the group *must_exist* and does not, an error is thrown
+#     and the installation fails.
+#
+#     The group is created if it does not exist, and it is
+#     created as a system group (GID < 1000) or user group
+#     (GID >= 1000) depending on the value of *system*.
+defaultGroups:
+    - name: users
+      must_exist: true
+      system: true
+    - lp
+    - video
+    - network
+    - storage
+    - name: wheel
+      must_exist: false
+      system: true
+    - audio
+    - name: nopasswdlogin
+      must_exist: false
+      system: true
+
+# When *sudoersGroup* is set to a non-empty string, Calamares creates a
+# sudoers file for the user. This file is located at:
+#     `/etc/sudoers.d/10-installer`
+# Remember to add the (value of) *sudoersGroup* to *defaultGroups*.
+#
+# If your Distribution already sets up a group of sudoers in its packaging,
+# remove this setting (delete or comment out the line below). Otherwise,
+# the setting will be duplicated in the `/etc/sudoers.d/10-installer` file,
+# potentially confusing users.
+sudoersGroup:    wheel
+
+# Some Distributions require a 'autologin' group for the user.
+# Autologin causes a user to become automatically logged in to
+# the desktop environment on boot.
+# Disable when your Distribution does not require such a group.
+#
+# Remember to add the (value of) *autologinGroup* to *defaultGroups*.
+autologinGroup:  autologin
+
+# See also *user.nopasswd_group* for another group that is optionally added to the user
+
+### ROOT AND SUDO
+#
+# Some distributions have a root user enabled for login. Others
+# rely entirely on sudo or similar mechanisms to raise privileges.
+
+# If set to `false` (the default), writes a sudoers file with `ALL=(ALL)`
+# so that commands can be run as any user. If set to `true`, writes
+# `ALL=(ALL:ALL)` so that any user and any group can be chosen.
+sudoersConfigureWithGroup: false
+
+# Setting this to false, causes the root account to be disabled.
+# When disabled, hides the "Use the same password for administrator"
+# checkbox. Also hides the "Choose a password" and associated text-inputs.
+setRootPassword: true
+
+# You can control the initial state for the 'reuse password for root'
+# checkbox here. Possible values are:
+#  - true to check or
+#  - false to uncheck
+#
+# When checked, the user password is used for the root account too.
+#
+# NOTE: *doReusePassword* requires *setRootPassword* to be enabled.
+doReusePassword: true
+
+
+### PASSWORDS AND LOGIN
+#
+# Autologin is convenient for single-user systems, but depends on
+# the location of the machine if it is practical. "Password strength"
+# measures measures might improve security by enforcing hard-to-guess
+# passwords, or might encourage a post-it-under-the-keyboard approach.
+# Distributions are free to steer their users to one kind of password
+# or another. Weak(er) passwords may be allowed, may cause a warning,
+# or may be forbidden entirely.
+
+# Autologin choice can be display to the user.
+# Possible values are:
+#  - true to display it
+#  - false to hide it
+# By default, this value is set to true.
+displayAutologin:   true
+
+# You can control the initial state for the 'autologin checkbox' here.
+# Possible values are:
+#  - true to check or
+#  - false to uncheck
+# These set the **initial** state of the checkbox.
+doAutologin:     true
+
+# These are optional password-requirements that a distro can enforce
+# on the user. The values given in this sample file set only very weak
+# validation settings.
+#
+# Calamares itself supports two checks:
+#   - minLength
+#   - maxLength
+# In this sample file, the values are set to -1 which means "no
+# minimum", "no maximum". This allows any password at all.
+# No effort is done to ensure that the checks are consistent
+# (e.g. specifying a maximum length less than the minimum length
+# will annoy users).
+#
+# Calamares supports password checking through libpwquality.
+# The libpwquality check relies on the (optional) libpwquality library.
+# The value for libpwquality is a list of configuration statements like
+# those found in pwquality.conf. The statements are handed off to the
+# libpwquality parser for evaluation. The check is ignored if
+# libpwquality is not available at build time (generates a warning in
+# the log). The Calamares password check rejects passwords with a
+# score of < 40 with the given libpwquality settings.
+#
+# (additional checks may be implemented in CheckPWQuality.cpp and
+# wired into UsersPage.cpp)
+#
+# To disable all password validations:
+#  - comment out the relevant 'passwordRequirements' keys below,
+#    or set minLength and maxLength to -1.
+#  - disable libpwquality at build-time.
+# To allow all passwords, but provide warnings:
+#  - set both 'allowWeakPasswords' and 'allowWeakPasswordsDefault' to true.
+#    (That will show the box *Allow weak passwords* in the user-
+#    interface, and check it by default).
+#  - configure password-checking however you wish.
+# To require specific password characteristics:
+#  - set 'allowWeakPasswords' to false (the default)
+#  - configure password-checking, e.g. with NIST settings
+
+
+# These are very weak -- actually, none at all -- requirements
+passwordRequirements:
+    minLength: -1  # Password at least this many characters
+    maxLength: -1  # Password at most this many characters
+    libpwquality:
+        - minlen=0
+        - minclass=0
+
+# These are "you must have a password, any password" -- requirements
+#
+# passwordRequirements:
+#     minLength: 1
+
+# These are requirements the try to follow the suggestions from
+#     https://pages.nist.gov/800-63-3/sp800-63b.html , "Digital Identity Guidelines".
+# Note that requiring long and complex passwords has its own cost,
+# because the user has to come up with one at install time.
+# Setting 'allowWeakPasswords' to false and 'doAutologin' to false
+# will require a strong password and prevent (graphical) login
+# without the password. It is likely to be annoying for casual users.
+#
+# passwordRequirements:
+#     minLength: 8
+#     maxLength: 64
+#     libpwquality:
+#         - minlen=8
+#         - maxrepeat=3
+#         - maxsequence=3
+#         - usersubstr=4
+#         - badwords=linux
+
+# You can control the visibility of the 'strong passwords' checkbox here.
+# Possible values are:
+#  - true to show or
+#  - false to hide  (default)
+# the checkbox. This checkbox allows the user to choose to disable
+# password-strength-checks. By default the box is **hidden**, so
+# that you have to pick a password that satisfies the checks.
+allowWeakPasswords: false
+# You can control the initial state for the 'strong passwords' checkbox here.
+# Possible values are:
+#  - true to uncheck or
+#  - false to check (default)
+# the checkbox by default. Since the box is labeled to enforce strong
+# passwords, in order to **allow** weak ones by default, the box needs
+# to be unchecked.
+allowWeakPasswordsDefault: false
+
+
+# User settings
+#
+# The user can enter a username, but there are some other
+# hidden settings for the user which are configurable in Calamares.
+#
+# Key *user* has the following sub-keys:
+#
+# - *shell* Shell to be used for the regular user of the target system.
+#   There are three possible kinds of settings:
+#    - unset (i.e. commented out, the default), act as if set to /bin/bash
+#    - empty (explicit), don't pass shell information to useradd at all
+#      and rely on a correct configuration file in /etc/default/useradd
+#    - set, non-empty, use that path as shell. No validation is done
+#      that the shell actually exists or is executable.
+# - *forbidden_names* Login names that may not be used. This list always
+#   contains "root" and "nobody", but may be extended to list other special
+#   names for a given distro (eg. "video", or "mysql" might not be a valid
+#   end-user login name).
+# - *home_permissions* Home directory of the user is given **approximately**
+#   this set of permissions. If not set, there is no default and no
+#   permission-setting is done (uses defaults of `useradd` in the target).
+#   A umask is computed from these permissions
+#   and passed to `useradd`.
+#
+#   You may write permissions as:
+#   - write "NNN" (three octal digits) or
+#   - write "oNNN" (small 'o' and three octal digits) or
+#   - write "rwxrwxrwx" (like the output of ls, with a - for unset bits)
+#   The following permissions mean the same thing: "o750", "rwxr-x---" .
+# - *nopasswd_group* If set, **and** the user sets no password, then
+#   the user is added to this group as well. Whether "no password" is
+#   allowed depends on other settings in this module; distributions that
+#   require a specific group for "no password" login should set this
+#   **and** configure the group in the *defaultGroups* section, above.
+#   The default is unset; this example configuration is non-default.
+user:
+  shell: /bin/bash
+  forbidden_names: [ root ]
+  home_permissions: "o700"
+  nopasswd_group: "nopasswdlogin"
+
+
+# Hostname settings
+#
+# The user can enter a hostname; this is configured into the system
+# in some way. There are settings for how a hostname is guessed (as
+# a default / suggestion) and where (or how) the hostname is set in
+# the target system.
+#
+# Key *hostname* has the following sub-keys:
+#
+# - *location* How the hostname is set in the target system:
+#   - *None*, to not set the hostname at all
+#   - *EtcFile*, to write to `/etc/hostname` directly
+#   - *Etc*, identical to above
+#   - *Hostnamed*, to use systemd hostnamed(1) over DBus
+#   - *Transient*, to remove `/etc/hostname` from the target
+#   The default is *EtcFile*. Setting this to *None* or *Transient* will
+#   hide the hostname field.
+# - *writeHostsFile* Should /etc/hosts be written with a hostname for
+#   this machine (also adds localhost and some ipv6 standard entries).
+#   Defaults to *true*.
+# - *template* Is a simple template for making a suggestion for the
+#   hostname, based on user data. The default is "${first}-${product}".
+#   This is used only if the hostname field is shown. KMacroExpander is
+#   used; write `${key}` where `key` is one of the following:
+#   - *first* User's first name (whatever is first in the User Name field,
+#     which is first-in-order but not necessarily a "first name" as in
+#     "given name" or "name by which you call someone"; beware of western bias)
+#   - *name* All the text in the User Name field.
+#   - *login* The login name (which may be suggested based on User Name)
+#   - *product* The hardware product, based on DMI data
+#   - *product2* The product as described by Qt
+#   - *cpu* CPU name
+#   - *host* Current hostname (which may be a transient hostname)
+#   Literal text in the template is preserved. Calamares tries to map
+#   `${key}` values to something that will fit in a hostname, but does not
+#   apply the same to literal text in the template. Do not use invalid
+#   characters in the literal text, or no suggeston will be done.
+# - *forbidden_names* lists hostnames that may not be used. This list
+#   always contains "localhost", but may list others that are unsuitable
+#   or broken in special ways.
+hostname:
+  location: EtcFile
+  writeHostsFile: true
+  template: "derp-${cpu}"
+  forbidden_names: [ localhost ]
+
+# Enable Active Directory enrollment support (opt-in)
+#
+# This uses realmd to enroll the machine in an Active Directory server
+# It requires realmd as a runtime dependency of Calamares, if enabled
+allowActiveDirectory: false
+
+presets:
+    fullName:
+        # value: "OEM User"
+        editable: true
+    loginName:
+        # value: "oem"
+        editable: true

airootfs/usr/share/calamares/modules/usersq.conf

@@ -0,0 +1,44 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# For documentation see Users Module users.conf
+#
+---
+# Used as default groups for the created user.
+# Adjust to your Distribution defaults.
+defaultGroups:
+    - users
+    - lp
+    - video
+    - network
+    - storage
+    - wheel
+    - audio
+    - lpadmin
+
+autologinGroup:  autologin
+
+doAutologin:     true
+
+sudoersGroup:    wheel
+
+setRootPassword: true
+
+doReusePassword: true
+
+passwordRequirements:
+    minLength: -1
+    maxLength: -1
+    libpwquality:
+        - minlen=0
+        - minclass=0
+
+allowWeakPasswords: false
+
+allowWeakPasswordsDefault: false
+
+userShell: /bin/bash
+
+setHostname: EtcFile
+
+writeHostsFile: true

airootfs/usr/share/calamares/modules/welcome.conf

@@ -0,0 +1,138 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Configuration for the welcome module. The welcome page
+# displays some information from the branding file.
+# Which parts it displays can be configured through
+# the show* variables.
+#
+# In addition to displaying the welcome page, this module
+# can check requirements for installation.
+---
+# Display settings for various buttons on the welcome page.
+# The URLs themselves come from `branding.desc`. Each button
+# is show if the corresponding *show<buttonname>* setting
+# here is "true". If the setting is "false", the button is hidden.
+# Empty or not-set is interpreted as "false".
+#
+# TODO:3.3 Remove the URL fallback here; URLs only in `branding.desc`
+#
+# The setting can also be a full URL which will then be used
+# instead of the one from the branding file.
+showSupportUrl:         true
+showKnownIssuesUrl:     true
+showReleaseNotesUrl:    false
+# TODO:3.3 Move to branding, keep only a bool here
+showDonateUrl:          https://kde.org/community/donations/
+
+# Requirements checking. These are general, generic, things
+# that are checked. They may not match with the actual requirements
+# imposed by other modules in the system.
+requirements:
+    # Amount of available disk, in GiB. Floating-point is allowed here.
+    # Note that this does not account for *usable* disk, so it is possible
+    # to satisfy this requirement, yet have no space to install to.
+    requiredStorage:    5.5
+
+    # Amount of available RAM, in GiB. Floating-point is allowed here.
+    requiredRam:        1.0
+
+    # To check for internet connectivity, Calamares does a HTTP GET
+    # on this URL; on success (e.g. HTTP code 200) internet is OK.
+    # Use a privacy-respecting URL here, preferably in your own
+    # distribution domain.
+    #
+    # The URL is only used if "internet" is in the *check* list below.
+    internetCheckUrl:   http://example.com
+    #
+    # This may be a single URL, or a list or URLs, in which case the
+    # URLs will be checked one-by-one; if any of them returns data,
+    # internet is assumed to be OK. This can be used to check via
+    # a number of places, where some domains may be down or blocked.
+    #
+    # To use a list of URLs, just use YAML list syntax (e.g.
+    #
+    # internetCheckUrl:
+    #     - http://www.kde.org
+    #     - http://www.freebsd.org
+    #
+    # or short-form
+    #
+    # internetCheckUrl: [ http://www.kde.org, http://www.freebsd.org ]
+
+    # List conditions to check. Each listed condition will be
+    # probed in some way, and yields true or false according to
+    # the host system satisfying the condition.
+    #
+    # This sample file lists all the conditions that are known.
+    #
+    # Note that the last three checks are for testing-purposes only,
+    # and shouldn't be used in production (they are only available
+    # when building Calamares in development mode). There are five
+    # special checks:
+    # - *false* is a check that is always false (unsatisfied)
+    # - *true* is a check that is always true (satisfied)
+    # - *slow-false* takes 3 seconds, and then is false; use this one to
+    #   show off the waiting-spinner before the first results come in
+    # - *slow-true* takes 3 seconds, and then is true
+    # - *snark* is a check that is only satisfied once it has been checked
+    #   at least three times ("what I tell you three times is true").
+    # Keep in mind that "true" and "false" are YAML keywords for
+    # boolean values, so should be quoted.
+    check:
+        - storage
+        - ram
+        - power
+        - internet
+        - root
+        - screen
+        - "false"
+        - slow-true
+        - snark
+    # List conditions that **must** be satisfied (from the list
+    # of conditions, above) for installation to proceed.
+    # If any of these conditions are not met, the user cannot
+    # continue past the welcome page.
+    required:
+        # - storage
+        - ram
+        # - root
+
+# GeoIP checking
+#
+# This can be used to pre-select a language based on the country
+# the user is currently in. It *assumes* that there's internet
+# connectivity, though. Configuration is like in the locale module,
+# but remember to use a URL that returns full data **and** to
+# use a selector that will pick the country, not the timezone.
+#
+# To disable GeoIP checking, either comment-out the entire geoip section,
+# or set the *style* key to an unsupported format (e.g. `none`).
+# Also, note the analogous feature in `src/modules/locale/locale.conf`,
+# which is where you will find complete documentation.
+#
+# For testing, the *style* may be set to `fixed`, any URL that
+# returns data (e.g. `http://example.com`) and then *selector*
+# sets the data that is actually returned (e.g. "DE" to simulate
+# the machine being in Germany).
+#
+# NOTE: the *selector* must pick the country code from the GeoIP
+#       data. Timezone, city, or other data will not be recognized.
+#
+geoip:
+    style:    "none"
+    url:      "https://geoip.kde.org/v1/ubiquity"  # extended XML format
+    selector: "CountryCode"  # blank uses default, which is wrong
+
+# User interface
+#
+# The "select language" icon is an international standard, but it
+# might not theme very well with your desktop environment.
+# Fill in an icon name (following FreeDesktop standards) to
+# use that named icon instead of the usual one.
+#
+# Leave blank or unset to use the international standard.
+#
+# Known icons in this space are "set-language" and "config-language".
+#
+# languageIcon: set-language

airootfs/usr/share/calamares/modules/welcomeq.conf

@@ -0,0 +1,40 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Configuration for the welcomeq module.
+#
+# The configuration for welcomeq is exactly the same
+# as the welcome module, with the one exception of
+# *qmlSearch* which governs QML loading.
+#
+# No documentation is given here: look in the welcome module.
+---
+# Setting for QML loading: use QRC, branding, or both sources of files
+qmlSearch: both
+
+# Everythin below here is documented in `welcome.conf`
+showSupportUrl:         true
+showKnownIssuesUrl:     true
+showReleaseNotesUrl:    true
+# showDonateUrl:  https://kde.org/community/donations/
+
+requirements:
+    requiredStorage:    5.5
+    requiredRam:        1.0
+    internetCheckUrl:   http://google.com
+    check:
+        - storage
+        - ram
+        - power
+        - internet
+        - root
+        - screen
+    required:
+        - ram
+
+geoip:
+    style:    "none"
+    url:      "https://geoip.kde.org/v1/ubiquity"  # extended XML format
+    selector: "CountryCode"  # blank uses default, which is wrong
+
+#languageIcon: languages

airootfs/usr/share/calamares/modules/zfs.conf

@@ -0,0 +1,45 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# The zfs module creates the zfs pools and datasets
+#
+#
+#
+---
+# The name to be used for the zpool
+poolName: zpcala
+
+# A list of options that will be passed to zpool create
+#
+# Encryption options should generally not be added here since they will be added by
+# selecting the encrypt disk option in the partition module
+poolOptions: "-f -o ashift=12 -O mountpoint=none -O acltype=posixacl -O relatime=on"
+
+# A list of options that will be passed to zfs create when creating each dataset
+# Do not include "canmount" or "mountpoint" as those are set below in the datasets array
+datasetOptions: "-o compression=lz4 -o atime=off -o xattr=sa"
+
+# An array of datasets that will be created on the zpool mounted at /
+#
+# This default configuration is commonly used when support for booting more than one distro
+# out of a single zpool is desired.  If you decide to keep this default configuration,
+# you should replace "distro" with an identifier that represents your distro.
+datasets:
+    - dsName: ROOT
+      mountpoint: none
+      canMount: off
+    - dsName: ROOT/distro
+      mountpoint: none
+      canMount: off
+    - dsName: ROOT/distro/root
+      mountpoint: /
+      canMount: noauto
+    - dsName: ROOT/distro/home
+      mountpoint: /home
+      canMount: on
+    - dsName: ROOT/distro/varcache
+      mountpoint: /var/cache
+      canMount: on
+    - dsName: ROOT/distro/varlog
+      mountpoint: /var/log
+      canMount: on

airootfs/usr/share/calamares/qml/calamares/slideshow/BackButton.qml

@@ -0,0 +1,15 @@
+/* === This file is part of Calamares - <https://calamares.io> ===
+ *
+ *   SPDX-FileCopyrightText: 2018 Adriaan de Groot <groot@kde.org>
+ *   SPDX-License-Identifier: GPL-3.0-or-later
+ *
+ *   Calamares is Free Software: see the License-Identifier above.
+ *
+ */
+
+NavButton {
+    id: backButton
+    anchors.left: parent.left
+    visible: parent.currentSlide > 0
+    isForward: false
+}

airootfs/usr/share/calamares/qml/calamares/slideshow/ForwardButton.qml

@@ -0,0 +1,14 @@
+/* === This file is part of Calamares - <https://calamares.io> ===
+ *
+ *   SPDX-FileCopyrightText: 2018 Adriaan de Groot <groot@kde.org>
+ *   SPDX-License-Identifier: GPL-3.0-or-later
+ *
+ *   Calamares is Free Software: see the License-Identifier above.
+ *
+ */
+
+NavButton {
+    id: forwardButton
+    anchors.right: parent.right
+    visible: parent.currentSlide + 1 < parent.slides.length;
+}

airootfs/usr/share/calamares/qml/calamares/slideshow/NavButton.qml

@@ -0,0 +1,59 @@
+/* === This file is part of Calamares - <https://calamares.io> ===
+ *
+ *   SPDX-FileCopyrightText: 2018 Adriaan de Groot <groot@kde.org>
+ *   SPDX-License-Identifier: GPL-3.0-or-later
+ *
+ *   Calamares is Free Software: see the License-Identifier above.
+ *
+ */
+
+/* This is a navigation (arrow) button that fades in on hover, and
+ * which calls forward / backward navigation on the presentation it
+ * is in. It should be a child item of the presentation (not of a
+ * single slide). Use the ForwardButton or BackButton for a pre-
+ * configured instance that interacts with the presentation.
+ */
+
+import QtQuick 2.5;
+
+Image {
+    id: fade
+
+    property bool isForward : true
+
+    width: 100
+    height: 100
+    anchors.verticalCenter: parent.verticalCenter
+    opacity: 0.3
+
+    OpacityAnimator {
+        id: fadeIn
+        target: fade
+        from: fade.opacity
+        to: 1.0
+        duration: 500
+        running: false
+    }
+
+    OpacityAnimator {
+        id: fadeOut
+        target: fade
+        from: fade.opacity
+        to: 0.3
+        duration: 250
+        running: false
+    }
+
+    MouseArea {
+        anchors.fill: parent
+        hoverEnabled: true
+        onEntered: { fadeOut.running = false; fadeIn.running = true }
+        onExited: { fadeIn.running = false ; fadeOut.running = true }
+        onClicked: {
+            if (isForward)
+                fade.parent.goToNextSlide()
+            else
+                fade.parent.goToPreviousSlide()
+        }
+    }
+}

airootfs/usr/share/calamares/qml/calamares/slideshow/Presentation.qml

@@ -0,0 +1,238 @@
+/* === This file is part of Calamares - <https://calamares.io> ===
+ *
+ *   SPDX-FileCopyrightText: 2017 Adriaan de Groot <groot@kde.org>
+ *   SPDX-FileCopyrightText: 2016 The Qt Company Ltd.
+ *   SPDX-License-Identifier: LGPL-2.1-only
+ *
+ *   2017, Adriaan de Groot <groot@kde.org>
+ *     - added looping, keys-instead-of-shortcut
+ *   2018, Adriaan de Groot <groot@kde.org>
+ *     - make looping a property, drop the 'c' fade-key
+ *     - drop navigation through entering a slide number
+ *       (this and the 'c' key make sense in a *presentation*
+ *       slideshow, not in a passive slideshow like Calamares)
+ *     - remove quit key
+ *   2019, Adriaan de Groot <groot@kde.org>
+ *     - Support "V2" loading
+ *     - Disable shortcuts until the content is visible in Calamares
+ *   2020, Adriaan de Groot <groot@kde.org>
+ *     - Updated to SPDX headers
+ */
+
+/****************************************************************************
+**
+** Copyright (C) 2016 The Qt Company Ltd.
+** Contact: https://www.qt.io/licensing/
+**
+** This file is part of the QML Presentation System.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights.  These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+
+import QtQuick 2.5
+import QtQuick.Window 2.0
+
+Item {
+    id: root
+
+    property variant slides: []
+    property int currentSlide: 0
+
+    property bool loopSlides: true
+
+    property bool showNotes: false;
+    property bool allowDelay: true;
+    property alias mouseNavigation: mouseArea.enabled
+    property bool arrowNavigation: true
+    property bool keyShortcutsEnabled: true
+
+    property color titleColor: textColor;
+    property color textColor: "black"
+    property string fontFamily: "Helvetica"
+    property string codeFontFamily: "Courier New"
+
+    // This is set by the C++ part of Calamares when the slideshow
+    // becomes visible. You can connect it to a timer, or whatever
+    // else needs to start only when the slideshow becomes visible.
+    //
+    // It is used in this example also to keep the keyboard shortcuts
+    // enabled only while the slideshow is active.
+    property bool activatedInCalamares: false
+
+    // Private API
+    property int _lastShownSlide: 0
+
+    Component.onCompleted: {
+        var slideCount = 0;
+        var slides = [];
+        for (var i=0; i<root.children.length; ++i) {
+            var r = root.children[i];
+            if (r.isSlide) {
+                slides.push(r);
+            }
+        }
+
+        root.slides = slides;
+
+        // Make first slide visible...
+        if (root.slides.length > 0)
+            root.slides[root.currentSlide].visible = true;
+    }
+
+    function switchSlides(from, to, forward) {
+        from.visible = false
+        to.visible = true
+        return true
+    }
+
+    onCurrentSlideChanged: {
+        switchSlides(root.slides[_lastShownSlide], root.slides[currentSlide], currentSlide > _lastShownSlide)
+        _lastShownSlide = currentSlide
+        // Always keep focus on the slideshow
+        root.focus = true
+    }
+
+    function goToNextSlide() {
+        if (root.slides[currentSlide].delayPoints) {
+            if (root.slides[currentSlide]._advance())
+                return;
+        }
+        if (currentSlide + 1 < root.slides.length)
+            ++currentSlide;
+        else if (loopSlides)
+            currentSlide = 0;  // Loop at the end
+    }
+
+    function goToPreviousSlide() {
+        if (currentSlide - 1 >= 0)
+            --currentSlide;
+        else if (loopSlides)
+            currentSlide = root.slides.length - 1
+    }
+
+    focus: true  // Keep focus
+
+    // Navigation through key events, too
+    Keys.onSpacePressed: goToNextSlide()
+    Keys.onRightPressed: goToNextSlide()
+    Keys.onLeftPressed: goToPreviousSlide()
+
+    // navigate with arrow keys
+    Shortcut { sequence: StandardKey.MoveToNextLine; enabled: root.activatedInCalamares && root .arrowNavigation; onActivated: goToNextSlide() }
+    Shortcut { sequence: StandardKey.MoveToPreviousLine; enabled: root.activatedInCalamares && root.arrowNavigation; onActivated: goToPreviousSlide() }
+    Shortcut { sequence: StandardKey.MoveToNextChar; enabled: root.activatedInCalamares && root.arrowNavigation; onActivated: goToNextSlide() }
+    Shortcut { sequence: StandardKey.MoveToPreviousChar; enabled: root.activatedInCalamares && root.arrowNavigation; onActivated: goToPreviousSlide() }
+
+    // presentation-specific single-key shortcuts (which interfere with normal typing)
+    Shortcut { sequence: " "; enabled: root.activatedInCalamares && root.keyShortcutsEnabled; onActivated: goToNextSlide() }
+
+    // standard shortcuts
+    Shortcut { sequence: StandardKey.MoveToNextPage; enabled: root.activatedInCalamares; onActivated: goToNextSlide() }
+    Shortcut { sequence: StandardKey.MoveToPreviousPage; enabled: root.activatedInCalamares; onActivated: goToPreviousSlide() }
+
+    MouseArea {
+        id: mouseArea
+        anchors.fill: parent
+        acceptedButtons: Qt.LeftButton | Qt.RightButton
+        onClicked: {
+            if (mouse.button == Qt.RightButton)
+                goToPreviousSlide()
+            else
+                goToNextSlide()
+        }
+        onPressAndHold: goToPreviousSlide(); //A back mechanism for touch only devices
+    }
+
+    Window {
+        id: notesWindow;
+        width: 400
+        height: 300
+
+        title: "QML Presentation: Notes"
+        visible: root.showNotes
+
+        Flickable {
+            anchors.fill: parent
+            contentWidth: parent.width
+            contentHeight: textContainer.height
+
+            Item {
+                id: textContainer
+                width: parent.width
+                height: notesText.height + 2 * notesText.padding
+
+                Text {
+                    id: notesText
+
+                    anchors.margins: 16
+
+                    font.pixelSize: 16
+                    wrapMode: Text.WordWrap
+
+                    property string notes: root.slides[root.currentSlide].notes;
+
+                    onNotesChanged: {
+                        var result = "";
+
+                        var lines = notes.split("\n");
+                        var beginNewLine = false
+                        for (var i=0; i<lines.length; ++i) {
+                            var line = lines[i].trim();
+                            if (line.length == 0) {
+                                beginNewLine = true;
+                            } else {
+                                if (beginNewLine && result.length) {
+                                    result += "\n\n"
+                                    beginNewLine = false
+                                }
+                                if (result.length > 0)
+                                    result += " ";
+                                result += line;
+                            }
+                        }
+
+                        if (result.length == 0) {
+                            font.italic = true;
+                            text = "no notes.."
+                        } else {
+                            font.italic = false;
+                            text = result;
+                        }
+                    }
+                }
+            }
+        }
+    }
+}

airootfs/usr/share/calamares/qml/calamares/slideshow/Slide.qml

@@ -0,0 +1,206 @@
+/* === This file is part of Calamares - <https://calamares.io> ===
+ *
+ *   SPDX-FileCopyrightText: 2012 Digia Plc and/or its subsidiary(-ies).
+ *   SPDX-License-Identifier: LGPL-2.1-only
+ */
+
+/****************************************************************************
+**
+** Copyright (C) 2012 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QML Presentation System.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights.  These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+
+import QtQuick 2.5
+
+Item {
+    /*
+      Slides can only be instantiated as a direct child of a Presentation {} as they rely on
+      several properties there.
+     */
+
+    id: slide
+
+    property bool isSlide: true;
+
+    property bool delayPoints: false;
+    property int _pointCounter: 0;
+    function _advance() {
+        if (!parent.allowDelay)
+            return false;
+
+        _pointCounter = _pointCounter + 1;
+        if (_pointCounter < content.length)
+            return true;
+        _pointCounter = 0;
+        return false;
+    }
+
+    property string title;
+    property variant content: []
+    property string centeredText
+    property string writeInText;
+    property string notes;
+
+    property real fontSize: parent.height * 0.05
+    property real fontScale: 1
+
+    property real baseFontSize: fontSize * fontScale
+    property real titleFontSize: fontSize * 1.2 * fontScale
+    property real bulletSpacing: 1
+
+    property real contentWidth: width
+
+    // Define the slide to be the "content area"
+    x: parent.width * 0.05
+    y: parent.height * 0.2
+    width: parent.width * 0.9
+    height: parent.height * 0.7
+
+    property real masterWidth: parent.width
+    property real masterHeight: parent.height
+
+    property color titleColor: parent.titleColor;
+    property color textColor: parent.textColor;
+    property string fontFamily: parent.fontFamily;
+    property int textFormat: Text.PlainText
+
+    visible: false
+
+    Text {
+        id: titleText
+        font.pixelSize: titleFontSize
+        text: title;
+        anchors.horizontalCenter: parent.horizontalCenter
+        anchors.bottom: parent.top
+        anchors.bottomMargin: parent.fontSize * 1.5
+        font.bold: true;
+        font.family: slide.fontFamily
+        color: slide.titleColor
+        horizontalAlignment: Text.Center
+        z: 1
+    }
+
+    Text {
+        id: centeredId
+        width: parent.width
+        anchors.centerIn: parent
+        anchors.verticalCenterOffset: - parent.y / 3
+        text: centeredText
+        horizontalAlignment: Text.Center
+        font.pixelSize: baseFontSize
+        font.family: slide.fontFamily
+        color: slide.textColor
+        wrapMode: Text.Wrap
+    }
+
+    Text {
+        id: writeInTextId
+        property int length;
+        font.family: slide.fontFamily
+        font.pixelSize: baseFontSize
+        color: slide.textColor
+
+        anchors.fill: parent;
+        wrapMode: Text.Wrap
+
+        text: slide.writeInText.substring(0, length);
+
+        NumberAnimation on length {
+            from: 0;
+            to: slide.writeInText.length;
+            duration: slide.writeInText.length * 30;
+            running: slide.visible && parent.visible && slide.writeInText.length > 0
+        }
+
+        visible: slide.writeInText != undefined;
+    }
+
+
+    Column {
+        id: contentId
+        anchors.fill: parent
+
+        Repeater {
+            model: content.length
+
+            Row {
+                id: row
+
+                function decideIndentLevel(s) { return s.charAt(0) == " " ? 1 + decideIndentLevel(s.substring(1)) : 0 }
+                property int indentLevel: decideIndentLevel(content[index])
+                property int nextIndentLevel: index < content.length - 1 ? decideIndentLevel(content[index+1]) : 0
+                property real indentFactor: (10 - row.indentLevel * 2) / 10;
+
+                height: text.height + (nextIndentLevel == 0 ? 1 : 0.3) * slide.baseFontSize * slide.bulletSpacing
+                x: slide.baseFontSize * indentLevel
+                visible: (!slide.parent.allowDelay || !delayPoints) || index <= _pointCounter
+
+                Rectangle {
+                    id: dot
+                    anchors.baseline: text.baseline
+                    anchors.baselineOffset: -text.font.pixelSize / 2
+                    width: text.font.pixelSize / 3
+                    height: text.font.pixelSize / 3
+                    color: slide.textColor
+                    radius: width / 2
+                    opacity: text.text.length == 0 ? 0 : 1
+                }
+
+                Item {
+                    id: space
+                    width: dot.width * 1.5
+                    height: 1
+                }
+
+                Text {
+                    id: text
+                    width: slide.contentWidth - parent.x - dot.width - space.width
+                    font.pixelSize: baseFontSize * row.indentFactor
+                    text: content[index]
+                    textFormat: slide.textFormat
+                    wrapMode: Text.WordWrap
+                    color: slide.textColor
+                    horizontalAlignment: Text.AlignLeft
+                    font.family: slide.fontFamily
+                }
+            }
+        }
+    }
+
+}

airootfs/usr/share/calamares/qml/calamares/slideshow/SlideCounter.qml

@@ -0,0 +1,29 @@
+/* === This file is part of Calamares - <https://calamares.io> ===
+ *
+ *   SPDX-FileCopyrightText: 2018 Adriaan de Groot <groot@kde.org>
+ *   SPDX-License-Identifier: GPL-3.0-or-later
+ *
+ *   Calamares is Free Software: see the License-Identifier above.
+ *
+ */
+
+/* This control just shows a (non-translated) count of the slides
+ * in the slideshow in the format "n / total".
+ */
+
+import QtQuick 2.5;
+
+Rectangle {
+    id: slideCounter
+    anchors.right: parent.right
+    anchors.bottom: parent.bottom
+    width: 100
+    height: 50
+
+    Text {
+        id: slideCounterText
+        anchors.centerIn: parent
+        //: slide counter, %1 of %2 (numeric)
+        text: qsTr("%L1 / %L2").arg(parent.parent.currentSlide + 1).arg(parent.parent.slides.length)
+    }
+}

airootfs/usr/share/calamares/qml/calamares/slideshow/qmldir

@@ -0,0 +1,10 @@
+module calamares.slideshow
+
+Presentation 1.0 Presentation.qml
+Slide 1.0 Slide.qml
+
+NavButton 1.0 NavButton.qml
+ForwardButton 1.0 ForwardButton.qml
+BackButton 1.0 BackButton.qml
+
+SlideCounter 1.0 SlideCounter.qml

airootfs/usr/share/calamares/qml/calamares/slideshow/qmldir.license

@@ -0,0 +1,2 @@
+SPDX-FileCopyrightText: no
+SPDX-License-Identifier: CC0-1.0

airootfs/usr/share/calamares/settings.conf

@@ -0,0 +1,236 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Configuration file for Calamares
+#
+# This is the top-level configuration file for Calamares.
+# It specifies what modules will be used, as well as some
+# overall characteristics -- is this a setup program, or
+# an installer. More specific configuration is devolved
+# to the branding file (for the UI) and the individual
+# module configuration files (for functionality).
+---
+# Modules can be job modules (with different interfaces) and QtWidgets view
+# modules. They could all be placed in a number of different paths.
+# "modules-search" is a list of strings, each of these can either be a full
+# path to a directory or the keyword "local".
+#
+# "local" means:
+#   - modules in $LIBDIR/calamares/modules, with
+#   - settings in SHARE/calamares/modules or /etc/calamares/modules.
+# In debug-mode (e.g. calamares -d) "local" also adds some paths
+# that make sense from inside the build-directory, so that you
+# can build-and-run with the latest modules immediately.
+#
+# Strings other than "local" are taken as paths and interpreted
+# relative to wherever Calamares is started. It is therefore **strongly**
+# recommended to use only absolute paths here. This is mostly useful
+# if your distro has forks of standard Calamares modules, but also
+# uses some form of upstream packaging which might overwrite those
+# forked modules -- then you can keep modules somewhere outside of
+# the "regular" module tree.
+#
+#
+# YAML: list of strings.
+modules-search: [ local ]
+
+# Instances section. This section is optional, and it defines custom instances
+# for modules of any kind. An instance entry has these keys:
+# - *module* name, which matches the module name from the module descriptor
+#   (usually the name of the directory under `src/modules/`, but third-
+#   party modules may diverge.
+# - *id* (optional) an identifier to distinguish this instance from
+#   all the others. If none is given, the name of the module is used.
+#   Together, the module and id form an instance key (see below).
+# - *config* (optional) a filename for the configuration. If none is
+#   given, *module*`.conf` is used (e.g. `welcome.conf` for the welcome
+#   module)
+# - *weight* (optional) In the *exec* phase of the sequence, progress
+#   is reported as jobs are completed. The jobs from a single module
+#   together contribute the full weight of that module. The overall
+#   progress (0 .. 100%) is divided up according to the weight of each
+#   module. Give modules that take a lot of time to complete, a larger
+#   weight to keep the overall progress moving along steadily. This
+#   weight overrides a weight given in the module descriptor. If no weight
+#   is given, uses the value from the module descriptor, or 1 if there
+#   isn't one there either.
+#
+# The primary goal of this mechanism is to allow loading multiple instances
+# of the same module, with different configuration. If you don't need this,
+# the instances section can safely be left empty.
+#
+# Module name plus instance name makes an instance key, e.g.
+# "packagechooserq@licenseq", where "packagechooserq" is the module name (for the packagechooserq
+# viewmodule) and "licenseq" is the instance name. In the *sequence*
+# section below, use instance-keys to name instances (instead of just
+# a module name, for modules which have only a single instance).
+#
+# Every module implicitly has an instance with the instance name equal
+# to its module name, e.g. "welcome@welcome". In the *sequence* section,
+# mentioning a module without a full instance key (e.g. "welcome")
+# means that implicit module.
+#
+# An instance may specify its configuration file (e.g. `webview-home.conf`).
+# The implicit instances all have configuration files named `<module>.conf`.
+# This (implict) way matches the source examples, where the welcome
+# module contains an example `welcome.conf`. Specify a *config* for
+# any module (also implicit instances) to change which file is used.
+#
+# For more information on running module instances, run Calamares in debug
+# mode and check the Modules page in the Debug information interface.
+#
+# A module that is often used with instances is shellprocess, which will
+# run shell commands specified in the configuration file. By configuring
+# more than one instance of the module, multiple shell sessions can be run
+# during install.
+#
+# YAML: list of maps of string:string key-value pairs.
+#instances:
+#- id:       licenseq
+#  module:   packagechooserq
+#  config:   licenseq.conf
+
+# Sequence section. This section describes the sequence of modules, both
+# viewmodules and jobmodules, as they should appear and/or run.
+#
+# A jobmodule instance key (or name) can only appear in an exec phase, whereas
+# a viewmodule instance key (or name) can appear in both exec and show phases.
+# There is no limit to the number of show or exec phases. However, the same
+# module instance key should not appear more than once per phase, and
+# deployers should take notice that the global storage structure is persistent
+# throughout the application lifetime, possibly influencing behavior across
+# phases. A show phase defines a sequence of viewmodules (and therefore
+# pages). These viewmodules can offer up jobs for the execution queue.
+#
+# An exec phase displays a progress page (with brandable slideshow). This
+# progress page iterates over the modules listed in the *immediately
+# preceding* show phase, and enqueues their jobs, as well as any other jobs
+# from jobmodules, in the order defined in the current exec phase.
+#
+# It then executes the job queue and clears it. If a viewmodule offers up a
+# job for execution, but the module name (or instance key) isn't listed in the
+# immediately following exec phase, this job will not be executed.
+#
+# YAML: list of lists of strings.
+sequence:
+- show:
+  - welcome
+#  - notesqml
+#  - packagechooserq@licenseq
+  - locale
+  - keyboard
+  - partition
+  - users
+#  - tracking
+  - summary
+- exec:
+#  - dummycpp
+#  - dummyprocess
+#  - dummypython
+  - partition
+#  - zfs
+  - mount
+  - unpackfs
+  - machineid
+  - locale
+  - keyboard
+  - localecfg
+#  - luksbootkeyfile
+#  - luksopenswaphookcfg
+#  - dracutlukscfg
+  - fstab
+#  - plymouthcfg
+#  - zfshostid
+  - initcpiocfg
+  - initcpio
+  - users
+  - displaymanager
+  - networkcfg
+  - hwclock
+  - services-systemd
+#  - dracut
+#  - initramfs
+#  - grubcfg
+  - bootloader
+  - umount
+- show:
+  - finished
+
+# A branding component is a directory, either in SHARE/calamares/branding or
+# in /etc/calamares/branding (the latter takes precedence). The directory must
+# contain a YAML file branding.desc which may reference additional resources
+# (such as images) as paths relative to the current directory.
+#
+# A branding component can also ship a QML slideshow for execution pages,
+# along with translation files.
+#
+# Only the name of the branding component (directory) should be specified
+# here, Calamares then takes care of finding it and loading the contents.
+#
+# YAML: string.
+branding: default
+
+# If this is set to true, Calamares will show an "Are you sure?" prompt right
+# before each execution phase, i.e. at points of no return. If this is set to
+# false, no prompt is shown. Default is false, but Calamares will complain if
+# this is not explicitly set.
+#
+# YAML: boolean.
+prompt-install: false
+
+# If this is set to true, Calamares will execute all target environment
+# commands in the current environment, without chroot. This setting should
+# only be used when setting up Calamares as a post-install configuration tool,
+# as opposed to a full operating system installer.
+#
+# Some official Calamares modules are not expected to function with this
+# setting. (e.g. partitioning seems like a bad idea, since that is expected to
+# have been done already)
+#
+# Default is false (for a normal installer), but Calamares will complain if
+# this is not explicitly set.
+#
+# YAML: boolean.
+dont-chroot: false
+
+# If this is set to true, Calamares refers to itself as a "setup program"
+# rather than an "installer". Defaults to the value of dont-chroot, but
+# Calamares will complain if this is not explicitly set.
+oem-setup: false
+
+# If this is set to true, the "Cancel" button will be disabled entirely.
+# The button is also hidden from view.
+#
+# This can be useful if when e.g. Calamares is used as a post-install
+# configuration tool and you require the user to go through all the
+# configuration steps.
+#
+# Default is false, but Calamares will complain if this is not explicitly set.
+#
+# YAML: boolean.
+disable-cancel: false
+
+# If this is set to true, the "Cancel" button will be disabled once
+# you start the 'Installation', meaning there won't be a way to cancel
+# the Installation until it has finished or installation has failed.
+#
+# Default is false, but Calamares will complain if this is not explicitly set.
+#
+# YAML: boolean.
+disable-cancel-during-exec: false
+
+# If this is set to true, the "Next" and "Back" button will be hidden once
+# you start the 'Installation'.
+#
+# Default is false, but Calamares will complain if this is not explicitly set.
+#
+# YAML: boolean.
+hide-back-and-next-during-exec: false
+
+# If this is set to true, then once the end of the sequence has
+# been reached, the quit (done) button is clicked automatically
+# and Calamares will close. Default is false: the user will see
+# that the end of installation has been reached, and that things are ok.
+#
+#
+quit-at-end: false

airootfs/usr/share/icons/hicolor/scalable/apps/calamares.svg

@@ -0,0 +1,318 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!-- Created with Inkscape (http://www.inkscape.org/) -->
+
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:xlink="http://www.w3.org/1999/xlink"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   width="48"
+   height="48"
+   id="svg5453"
+   version="1.1"
+   inkscape:version="0.91 r13725"
+   sodipodi:docname="ubiquity.svg"
+   inkscape:export-filename="/home/jamboarder/Projects/KDE VDG/Calamares/calamares-icon-2.png"
+   inkscape:export-xdpi="90"
+   inkscape:export-ydpi="90">
+  <defs
+     id="defs5455">
+    <linearGradient
+       id="linearGradient5623">
+      <stop
+         id="stop5625"
+         offset="0"
+         style="stop-color:#d35400;stop-opacity:1;" />
+      <stop
+         style="stop-color:#d35400;stop-opacity:1;"
+         offset="1"
+         id="stop5627" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient3819">
+      <stop
+         style="stop-color:#eff0f1;stop-opacity:1;"
+         offset="0"
+         id="stop3821" />
+      <stop
+         style="stop-color:#bdc3c7;stop-opacity:1;"
+         offset="1"
+         id="stop3823" />
+    </linearGradient>
+    <linearGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient3819"
+       id="linearGradient3825"
+       x1="24"
+       y1="20"
+       x2="24"
+       y2="43.999973"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="translate(384.57143,499.798)" />
+    <linearGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient4227"
+       id="linearGradient3843"
+       x1="10"
+       y1="36"
+       x2="15"
+       y2="41"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="translate(384.57143,500.798)" />
+    <linearGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient4227"
+       id="linearGradient3847"
+       gradientUnits="userSpaceOnUse"
+       x1="9.9047623"
+       y1="36"
+       x2="14.90477"
+       y2="41.000008"
+       gradientTransform="translate(398.66666,500.798)" />
+    <linearGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient5623"
+       id="linearGradient3948"
+       x1="25.065147"
+       y1="33.843651"
+       x2="25"
+       y2="10"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="matrix(1,0,0,1.0833332,384.57143,492.96467)" />
+    <linearGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient4227"
+       id="linearGradient3080"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="matrix(1.3793103,0,0,1.3793103,384.81281,499.0393)"
+       x1="8.5250006"
+       y1="7.8000579"
+       x2="25.200001"
+       y2="25.200058" />
+    <linearGradient
+       id="linearGradient4227"
+       inkscape:collect="always">
+      <stop
+         id="stop4229"
+         offset="0"
+         style="stop-color:#292c2f;stop-opacity:1" />
+      <stop
+         id="stop4231"
+         offset="1"
+         style="stop-color:#000000;stop-opacity:0;" />
+    </linearGradient>
+  </defs>
+  <sodipodi:namedview
+     id="base"
+     pagecolor="#ffffff"
+     bordercolor="#666666"
+     borderopacity="1.0"
+     inkscape:pageopacity="0"
+     inkscape:pageshadow="2"
+     inkscape:zoom="10.854086"
+     inkscape:cx="15.323054"
+     inkscape:cy="18.776517"
+     inkscape:document-units="px"
+     inkscape:current-layer="layer1"
+     showgrid="true"
+     fit-margin-top="0"
+     fit-margin-left="0"
+     fit-margin-right="0"
+     fit-margin-bottom="0"
+     inkscape:window-width="1920"
+     inkscape:window-height="1021"
+     inkscape:window-x="-4"
+     inkscape:window-y="0"
+     inkscape:window-maximized="1"
+     inkscape:showpageshadow="false"
+     borderlayer="true"
+     showguides="true"
+     inkscape:snap-global="true"
+     inkscape:snap-nodes="true"
+     inkscape:snap-bbox="true"
+     inkscape:bbox-nodes="true"
+     inkscape:object-nodes="true">
+    <inkscape:grid
+       type="xygrid"
+       id="grid4063"
+       empspacing="4"
+       visible="true"
+       enabled="true"
+       snapvisiblegridlinesonly="true" />
+    <sodipodi:guide
+       position="1.1650391e-05,47.999996"
+       orientation="4,0"
+       id="guide4146" />
+    <sodipodi:guide
+       position="1.1650391e-05,43.999996"
+       orientation="0,48"
+       id="guide4148" />
+    <sodipodi:guide
+       position="48.000012,43.999996"
+       orientation="-4,0"
+       id="guide4150" />
+    <sodipodi:guide
+       position="1.1650391e-05,4.0000264"
+       orientation="4,0"
+       id="guide4154" />
+    <sodipodi:guide
+       position="1.1650391e-05,2.6367188e-05"
+       orientation="0,48"
+       id="guide4156" />
+    <sodipodi:guide
+       position="48.000012,2.6367188e-05"
+       orientation="-4,0"
+       id="guide4158" />
+    <sodipodi:guide
+       position="48.000012,4.0000264"
+       orientation="0,-48"
+       id="guide4160" />
+    <sodipodi:guide
+       position="48.000012,48.000026"
+       orientation="0,-4"
+       id="guide4162" />
+    <sodipodi:guide
+       position="44.000012,48.000026"
+       orientation="48,0"
+       id="guide4164" />
+    <sodipodi:guide
+       position="44.000012,2.6367188e-05"
+       orientation="0,4"
+       id="guide4166" />
+    <sodipodi:guide
+       position="48.000012,2.6367188e-05"
+       orientation="-48,0"
+       id="guide4168" />
+    <sodipodi:guide
+       position="4.0000422,48.000026"
+       orientation="0,-4"
+       id="guide4170" />
+    <sodipodi:guide
+       position="4.2167969e-05,48.000026"
+       orientation="48,0"
+       id="guide4172" />
+    <sodipodi:guide
+       position="4.2167969e-05,2.6367188e-05"
+       orientation="0,4"
+       id="guide4174" />
+    <sodipodi:guide
+       position="4.0000422,2.6367188e-05"
+       orientation="-48,0"
+       id="guide4176" />
+    <sodipodi:guide
+       position="4.0000117,47.999996"
+       orientation="43.999969,0"
+       id="guide4638" />
+    <sodipodi:guide
+       position="4.0000117,4.0000264"
+       orientation="0,20"
+       id="guide4640" />
+    <sodipodi:guide
+       position="24.000012,47.999996"
+       orientation="0,-20"
+       id="guide4644" />
+    <sodipodi:guide
+       position="4.0000422,24.000026"
+       orientation="20,0"
+       id="guide4666" />
+    <sodipodi:guide
+       position="4.0000422,4.0000264"
+       orientation="0,39.999969"
+       id="guide4668" />
+    <sodipodi:guide
+       position="44.000012,4.0000264"
+       orientation="-20,0"
+       id="guide4670" />
+  </sodipodi:namedview>
+  <metadata
+     id="metadata5458">
+    <rdf:RDF>
+      <cc:Work
+         rdf:about="">
+        <dc:format>image/svg+xml</dc:format>
+        <dc:type
+           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+        <dc:title />
+      </cc:Work>
+    </rdf:RDF>
+  </metadata>
+  <g
+     inkscape:label="Capa 1"
+     inkscape:groupmode="layer"
+     id="layer1"
+     transform="translate(-384.57143,-499.798)">
+    <rect
+       style="fill:url(#linearGradient3948);fill-opacity:1;stroke:none"
+       id="rect3936"
+       width="32"
+       height="25.999996"
+       x="392.57144"
+       y="503.798"
+       ry="0" />
+    <path
+       style="opacity:0.2;fill:#232629;fill-opacity:1;stroke:none"
+       d="m 408.57143,533.798 c -1.662,0 -3,1.338 -3,3 0,1.662 1.338,3 3,3 1.30536,0 2.39817,-0.84052 2.8125,-2 l 8.375,0 c 0.41433,1.15948 1.50714,2 2.8125,2 1.662,0 3,-1.338 3,-3 0,-1.662 -1.338,-3 -3,-3 -1.30536,0 -2.39817,0.84052 -2.8125,2 l -8.375,0 c -0.41433,-1.15948 -1.50714,-2 -2.8125,-2 z"
+       id="path3911"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:url(#linearGradient3825);fill-opacity:1;stroke:none"
+       d="m 388.57144,529.798 -10e-6,14 40,0 10e-6,-14 z"
+       id="rect3804"
+       inkscape:connector-curvature="0"
+       sodipodi:nodetypes="ccccc" />
+    <path
+       inkscape:connector-curvature="0"
+       id="path3829"
+       d="m 411.38393,537.798 8.375,0 c 0.41433,1.15948 1.50714,2 2.8125,2 1.662,0 3,-1.338 3,-3 0,-1.662 -1.338,-3 -3,-3 -1.30536,0 -2.39817,0.84052 -2.8125,2 l -8.375,0 c 0.1875,1 0.1875,1 0,2 z"
+       style="opacity:0.77876108;fill:#4d4d4d;fill-opacity:1;stroke:none"
+       sodipodi:nodetypes="ccsssccc" />
+    <path
+       sodipodi:nodetypes="ccccc"
+       inkscape:connector-curvature="0"
+       id="path3845"
+       d="m 406.66666,539.13133 4.76191,4.66667 8.14286,0 -9.14286,-9.42857 z"
+       style="opacity:0.2;fill:url(#linearGradient3847);fill-opacity:1.0;stroke:none" />
+    <path
+       style="opacity:0.2;fill:url(#linearGradient3843);fill-opacity:1.0;stroke:none"
+       d="m 392.57143,539.13133 4.61905,4.66667 13.38095,0 -4.86671,-6.9365 -7.13329,-0.0675 -2.23809,-2.42461 z"
+       id="path3835"
+       inkscape:connector-curvature="0"
+       sodipodi:nodetypes="ccccccc" />
+    <path
+       style="fill:#d35400;fill-opacity:1;stroke:none"
+       d="m 394.57143,533.798 c -1.662,0 -3,1.338 -3,3 0,1.662 1.338,3 3,3 1.30536,0 2.39817,-0.84052 2.8125,-2 l 8.375,0 c 0.41433,1.15948 1.50714,2 2.8125,2 1.662,0 3,-1.338 3,-3 0,-1.662 -1.338,-3 -3,-3 -1.30536,0 -2.39817,0.84052 -2.8125,2 l -8.375,0 c -0.41433,-1.15948 -1.50714,-2 -2.8125,-2 z"
+       id="rect3812"
+       inkscape:connector-curvature="0" />
+    <rect
+       ry="0"
+       y="542.79797"
+       x="388.57147"
+       height="0.99997008"
+       width="39.999954"
+       id="rect3827"
+       style="fill:#95a5a6;fill-opacity:1;stroke:none" />
+    <rect
+       style="fill:#eff0f1;fill-opacity:1;stroke:none"
+       id="rect3855"
+       width="39.999969"
+       height="1.0000263"
+       x="388.57147"
+       y="529.79797"
+       ry="0" />
+    <path
+       inkscape:connector-curvature="0"
+       style="opacity:0.2;fill:url(#linearGradient3080);fill-opacity:1;fill-rule:evenodd;stroke:none"
+       d="m 409.57143,513.798 0,1 -1,9 20.00001,19 0,0 0,0 -10e-6,-1 10e-6,-13 -19.00001,-19 z"
+       id="path4184"
+       sodipodi:nodetypes="cccccccccc" />
+    <path
+       style="color:#000000;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:medium;line-height:normal;font-family:sans-serif;text-indent:0;text-align:start;text-decoration:none;text-decoration-line:none;text-decoration-style:solid;text-decoration-color:#000000;letter-spacing:normal;word-spacing:normal;text-transform:none;direction:ltr;block-progression:tb;writing-mode:lr-tb;baseline-shift:baseline;text-anchor:start;white-space:normal;clip-rule:nonzero;display:inline;overflow:visible;visibility:visible;opacity:1;isolation:auto;mix-blend-mode:normal;color-interpolation:sRGB;color-interpolation-filters:linearRGB;solid-color:#000000;solid-opacity:1;fill:#fcfcfc;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;color-rendering:auto;image-rendering:auto;shape-rendering:auto;text-rendering:auto;enable-background:accumulate"
+       d="m 407.57143,509.798 0,10 -4.5,-4.5 -1.5,1.5 7,7 7,-7 -1.5,-1.5 -4.5,4.5 0,-10 -2,0 z"
+       id="path3938"
+       inkscape:connector-curvature="0" />
+  </g>
+</svg>