diff --git a/airootfs/etc/mkinitcpio.conf b/airootfs/etc/mkinitcpio.conf
new file mode 100644
index 0000000..75203ef
--- /dev/null
+++ b/airootfs/etc/mkinitcpio.conf
@@ -0,0 +1,3 @@
+# Standard hooks for a bootable Live ISO and installed system
+HOOKS=(base udev modconf kms keyboard keymap consolefont block filesystems fsck)
+COMPRESSION="zstd"
diff --git a/airootfs/usr/share/calamares/modules/mount.conf b/airootfs/usr/share/calamares/modules/mount.conf
index da95395..97888f2 100644
--- a/airootfs/usr/share/calamares/modules/mount.conf
+++ b/airootfs/usr/share/calamares/modules/mount.conf
@@ -1,23 +1,6 @@
 # SPDX-FileCopyrightText: no
 # SPDX-License-Identifier: CC0-1.0
-#
-# Mount filesystems in the target (generally, before treating the
-# target as a usable chroot / "live" system). Filesystems are
-# automatically mounted from the partitioning module. Filesystems
-# listed here are **extra**. The filesystems listed in *extraMounts*
-# are mounted in all target systems.
 ---
-# Extra filesystems to mount. The key's value is a list of entries; each
-# entry has five keys:
-#   - device    The device node to mount
-#   - fs (optional) The filesystem type to use
-#   - mountPoint Where to mount the filesystem
-#   - options (optional) An array of options to pass to mount
-#   - efi (optional) A boolean that when true is only mounted for UEFI installs
-#
-# The device is not mounted if the mountPoint is unset or if the fs is
-# set to unformatted.
-#
 extraMounts:
     - device: proc
       fs: proc
@@ -39,87 +22,17 @@ extraMounts:
       mountPoint: /sys/firmware/efi/efivars
       efi: true
 
-# Btrfs subvolumes to create if root filesystem is on btrfs volume.
-# If *mountpoint* is mounted already to another partition, it is ignored.
-# Separate subvolume for swapfile is handled separately and automatically.
-#
-# It is possible to prevent subvolume creation -- this is likely only relevant
-# for the root (/) subvolume -- by giving an empty string as a subvolume
-# name. In this case no subvolume will be created.
-#
-btrfsSubvolumes:
-    - mountPoint: /
-      subvolume: /@
-      # As an alternative:
-      #
-      # subvolume: ""
-    - mountPoint: /home
-      subvolume: /@home
-    - mountPoint: /var/cache
-      subvolume: /@cache
-    - mountPoint: /var/log
-      subvolume: /@log
+# Btrfs subvolumes removed to support flat ext4 installation
+btrfsSubvolumes: []
 
-# The name of the btrfs subvolume holding the swapfile.  This only used when
-# a swapfile is selected and the root filesystem is btrfs
-#
-btrfsSwapSubvol: /@swap
-
-# The mount options used to mount each filesystem.
-#
-# filesystem contains the name of the filesystem or on of three special
-# values, "default", efi" and "btrfs_swap".  The logic is applied in this manner:
-#   - If the partition is the EFI partition, the "efi" entry will be used
-#   - If the fs is btrfs and the subvolume is for the swapfile,
-#     the "btrfs_swap" entry is used
-#   - If the  filesystem is an exact match for filesystem, that entry is used
-#   - If no match is found in the above, the default entry is used
-#   - If there is no match and no default entry, "defaults" is used
-#   - If the mountOptions key is not present, "defaults" is used
-#
-# Each filesystem entry contains 3 keys, all of which are optional
-#   options - An array of mount options that is used on all disk types
-#   ssdOptions - An array of mount options combined with options for ssds
-#   hddOptions - An array of mount options combined with options for hdds
-# If combining these options results in an empty array, "defaults" is used
-#
-# Example 1
-# In this example, there are specific options for ext4 and btrfs filesystems,
-# the EFI partition and the subvolume holding the btrfs swapfile.  All other
-# filesystems use the default entry.  For the btrfs filesystem, there are
-# additional options specific to hdds and ssds
-#
-# mountOptions:
-#    - filesystem: default
-#      options: [ defaults ]
-#    - filesystem: efi
-#      options: [ defaults, umask=0077 ]
-#    - filesystem: ext4
-#      options: [ defaults ]
-#    - filesystem: btrfs
-#      options: [ defaults, compress=zstd:1 ]
-#      ssdOptions: [ discard=async ]
-#      hddOptions: [ autodefrag ]
-#    - filesystem: btrfs_swap
-#      options: [ defaults, noatime ]
-#
-# Example 2
-# In this example there is a single default used by all filesystems
-#
-# mountOptions:
-#    - filesystem: default
-#      options: [ defaults ]
-#
 mountOptions:
     - filesystem: default
       options: [ defaults ]
     - filesystem: efi
       options: [ defaults, umask=0077 ]
+    - filesystem: ext4
+      options: [ defaults, relatime ]
     - filesystem: btrfs
       options: [ defaults, compress=zstd:1 ]
     - filesystem: btrfs_swap
       options: [ defaults, noatime ]
-
-
-
-
diff --git a/airootfs/usr/share/calamares/modules/unpackfs.conf b/airootfs/usr/share/calamares/modules/unpackfs.conf
index 6282769..c09b520 100644
--- a/airootfs/usr/share/calamares/modules/unpackfs.conf
+++ b/airootfs/usr/share/calamares/modules/unpackfs.conf
@@ -1,123 +1,10 @@
 # SPDX-FileCopyrightText: no
 # SPDX-License-Identifier: CC0-1.0
-#
-# Unsquash / unpack a filesystem. Multiple sources are supported, and
-# they may be squashed or plain filesystems.
-#
-# Configuration:
-#
-#   from globalstorage: rootMountPoint
-#   from job.configuration: the path to where to mount the source image(s)
-#       for copying an ordered list of unpack mappings for image file <->
-#       target dir relative to rootMountPoint.
-
 ---
-# Each list item is unpacked, in order, to the target system.
-#
-# Each list item has the following **mandatory** attributes:
-#   - *source* path relative to the live / intstalling system to the image
-#   - *sourcefs* the type of the source files; valid entries are
-#       - `ext4` (copies the filesystem contents)
-#       - `squashfs` (unsquashes)
-#       - `file` (copies a file or directory)
-#       - (may be others if mount supports it)
-#   - *destination* path relative to rootMountPoint (so in the target
-#       system) where this filesystem is unpacked. It may be an
-#       empty string, which effectively is / (the root) of the target
-#       system.
-#
-# Each list item **optionally** can include the following attributes:
-#   - *exclude* is a list of values that is expanded into --exclude
-#       arguments for rsync (each entry in exclude gets its own --exclude).
-#   - *excludeFile* is a single file that is passed to rsync as an
-#       --exclude-file argument. This should be a full pathname
-#       inside the **host** filesystem.
-#   - *weight* is useful when the entries take wildly different
-#       times to unpack (e.g. with a squashfs, and one single file)
-#       and the total weight of this module should be distributed
-#       differently between the entries. (This is only relevant when
-#       there is more than one entry; by default all the entries
-#       have the same weight, 1)
-#
-# EXAMPLES
-#
-# Usually you list a filesystem image to unpack; you can use
-# squashfs or an ext4 image. An empty destination is equivalent to "/",
-# the root of the target system. The destination directory must exist
-# in the target system.
-#
-#   -   source: "/path/to/filesystem.sqfs"
-#       sourcefs: "squashfs"
-#       destination: ""
-#
-# Multiple entries are unpacked in-order; if there is more than one
-# item then only the first must exist beforehand -- it's ok to
-# create directories with one unsquash and then to use those
-# directories as a target from a second unsquash.
-#
-#   -   source: "/path/to/another/filesystem.img"
-#       sourcefs: "ext4"
-#       destination: ""
-#   -   source: "/path/to/another/filesystem2.img"
-#       sourcefs: "ext4"
-#       destination: "/usr/lib/extra"
-#
-# You can list filesystem source paths relative to the Calamares run
-# directory, if you use -d (this is only useful for testing, though).
-#
-#    -   source: ./example.sqfs
-#        sourcefs: squashfs
-#        destination: ""
-#
-# You can list individual files (copied one-by-one), or directories
-# (the files inside this directory are copied directly to the destination,
-# so no "dummycpp/" subdirectory is created in this example).
-# Do note that the target directory must exist already (e.g. from
-# extracting some other filesystem).
-#
-#    -   source: ../CHANGES
-#        sourcefs: file
-#        destination: "/tmp/derp"
-#    -   source: ../src/modules/dummycpp
-#        sourcefs: file
-#        destination: "/tmp/derp"
-#
-# The *destination* and *source* are handed off to rsync, so the semantics
-# of trailing slashes apply. In order to *rename* a file as it is
-# copied, specify one single file (e.g. CHANGES) and a full pathname
-# for its destination name, as in the example below.
-#
-# It is also possible to dynamically (conditionally) unpack a source by passing a boolean
-# value for *condition*. This may be true or false (constant) or name a globalstorage
-# value. Use '.' to separate parts of a globalstorage name if it is nested.
-#
-# This is used in e.g. stacked squashfses, where the user can select a specific
-# install type. The default value of *condition* is true.
-#
-#    -   source: ./example.minimal.sqfs
-#        sourcefs: squashfs
-#        destination: ""
-#        condition: false
-#    -   source: ./example.standard.sqfs
-#        sourcefs: squashfs
-#        destination: ""
-#        condition: exampleGlobalStorageVariable.subkey
-#
-# You may also wish to include optional squashfses, which may not exist at certain times
-# depending on your image tooling. If an optional squashfs is not found, it is simply
-# skipped.
-#
-#    -   source: ./example.standard.sqfs
-#        sourcefs: squashfs
-#        destination: ""
-#    -   source: ./example.extras.sqfs
-#        sourcefs: squashfs
-#        destination: ""
-#        optional: true
 unpack:
     -   source: "/run/archiso/bootmnt/arch/x86_64/airootfs.sfs"
         sourcefs: "squashfs"
         destination: ""
-    -   source: "/run/archiso/bootmnt/arch/boot/x86_64/vmlinuz-linux"
+    -   source: "/boot/vmlinuz-linux"
         sourcefs: "file"
         destination: "/boot/vmlinuz-linux"
diff --git a/airootfs/usr/share/calamares/modules/unpackfsc.conf b/airootfs/usr/share/calamares/modules/unpackfsc.conf
index b8780ac..419dac2 100644
--- a/airootfs/usr/share/calamares/modules/unpackfsc.conf
+++ b/airootfs/usr/share/calamares/modules/unpackfsc.conf
@@ -68,7 +68,10 @@
 #     A condition is used in e.g. stacked squashfses, where the user can select
 #     a specific install type. The default value of *condition* is true.
 
-source: /data/rootfs.fsa
-sourcefs: fsarchiver
-destination: "/"
-# condition: true
+unpack:
+    -   source: "/data/rootfs.fsa"
+        sourcefs: "fsarchiver"
+        destination: "/"
+    -   source: "/boot/vmlinuz-linux"
+        sourcefs: "file"
+        destination: "/boot/vmlinuz-linux"
diff --git a/grub/grub.cfg b/grub/grub.cfg
index b879a67..1d9db44 100644
--- a/grub/grub.cfg
+++ b/grub/grub.cfg
@@ -44,13 +44,13 @@ timeout_style=menu
 
 # Menu entries
 
-menuentry "Arch Linux install medium (%ARCH%, ${archiso_platform})" --class arch --class gnu-linux --class gnu --class os --id 'archlinux' {
+menuentry "HyprArch Linux install medium (%ARCH%, ${archiso_platform})" --class arch --class gnu-linux --class gnu --class os --id 'archlinux' {
     set gfxpayload=keep
     linux /%INSTALL_DIR%/boot/%ARCH%/vmlinuz-linux archisobasedir=%INSTALL_DIR% archisosearchuuid=%ARCHISO_UUID%
     initrd /%INSTALL_DIR%/boot/%ARCH%/initramfs-linux.img
 }
 
-menuentry "Arch Linux install medium with speakup screen reader (%ARCH%, ${archiso_platform})" --hotkey s --class arch --class gnu-linux --class gnu --class os --id 'archlinux-accessibility' {
+menuentry "HyprArch Linux install medium with speakup screen reader (%ARCH%, ${archiso_platform})" --hotkey s --class arch --class gnu-linux --class gnu --class os --id 'archlinux-accessibility' {
     set gfxpayload=keep
     linux /%INSTALL_DIR%/boot/%ARCH%/vmlinuz-linux archisobasedir=%INSTALL_DIR% archisosearchuuid=%ARCHISO_UUID% accessibility=on
     initrd /%INSTALL_DIR%/boot/%ARCH%/initramfs-linux.img
diff --git a/pacman.conf b/pacman.conf
index 2684a95..eb84006 100644
--- a/pacman.conf
+++ b/pacman.conf
@@ -106,3 +106,8 @@ Server = https://arcolinux.github.io/$repo/$arch
 [localrepo]
 SigLevel = Optional TrustAll
 Server = file:///home/stuartdrew/archdisto/local_repo
+
+[hyprarch-repo]
+SigLevel = Optional TrustAll
+# Use $arch so it automatically looks in the x86_64 folder
+Server = https://hyprarch-repo.stuple.net/$arch
diff --git a/profiledef.sh b/profiledef.sh
index 7278906..169ed08 100644
--- a/profiledef.sh
+++ b/profiledef.sh
@@ -26,4 +26,6 @@ file_permissions=(
   ["/etc/sddm.conf.d/autologin.conf"]="0:0:644"
   ["/root/install-arch.desktop"]="0:0:755"
   ["/usr/bin/calamares"]="0:0:755"
+  ["/etc/mkinitcpio.d"]="0:0:755"
+  ["/etc/mkinitcpio.conf"]="0:0:644"
 )